lkml.org 
[lkml]   [2012]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] staging: sm7xxfb: dead code removal
Date
From: "Javier M. Mellid" <jmunhoz@igalia.com>

This patch removes dead code related to BaseAddressInVRAM. It fixes
comment on RAM control bits too.

Tested with SM712.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
---
drivers/staging/sm7xxfb/sm7xxfb.c | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/sm7xxfb/sm7xxfb.c b/drivers/staging/sm7xxfb/sm7xxfb.c
index a8c5652..4ab149b 100644
--- a/drivers/staging/sm7xxfb/sm7xxfb.c
+++ b/drivers/staging/sm7xxfb/sm7xxfb.c
@@ -53,7 +53,7 @@ struct smtcfb_info {
u_int width;
u_int height;
u_int hz;
- u_long BaseAddressInVRAM;
+
u8 chipRevID;
};

@@ -220,17 +220,9 @@ static void sm712_set_timing(struct smtcfb_info *sfb)
static void sm712_setpalette(int regno, unsigned red, unsigned green,
unsigned blue, struct fb_info *info)
{
- struct smtcfb_info *sfb = info->par;
+ /* set bit 5:4 = 01 (write LCD RAM only) */
+ smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10);

- if (sfb->BaseAddressInVRAM)
- /*
- * second display palette for dual head. Enable CRT RAM, 6-bit
- * RAM
- */
- smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x20);
- else
- /* primary display palette. Enable LCD RAM only, 6-bit RAM */
- smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10);
smtc_mmiowb(regno, dac_reg);
smtc_mmiowb(red >> 10, dac_val);
smtc_mmiowb(green >> 10, dac_val);
@@ -932,8 +924,6 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
goto failed;

smtcfb_setmode(sfb);
- /* Primary display starting from 0 position */
- sfb->BaseAddressInVRAM = 0;

err = register_framebuffer(&sfb->fb);
if (err < 0)
--
1.7.10


\
 
 \ /
  Last update: 2012-06-26 06:42    [W:0.043 / U:1.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site