lkml.org 
[lkml]   [2012]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [GIT PULL] ACPI & Power Management Patches for Linux-3.5-merge
From
[ Original posting see [1] ]

> Note that there will be 3 conflicts when merging with your tree.
> If you don't feel like resolving them, you can pull my "next" branch,
> which is simply my "release" branch merged with your latest tree on Friday.

To make life easier I pulled in "next" GIT branch of Len's tree this
morning on top of upstream git829f51d.

My kernel built on the family Ubuntu box runs nicely means several
resume/suspend cycles were OK (see attached dmesg).

$ cat /proc/version
Linux version 3.4.0-git829f51d-1-ovl-generic
(sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro
4.6.3-1ubuntu5) ) #2 SMP Sat Jun 2 11:33:53 CEST 2012

$ dmesg | grep -i acpi | grep -i rev
[ 0.004228] ACPI: Core revision 20120518

$ LC_ALL=C ll *3.4.0*git829f51d* (German local-time UTC+2)
-rw-r--r-- 1 wearefam wearefam 1164128 Jun 2 11:41
linux-firmware-image_3.4.0+git829f51d-1~dileks1_amd64.deb
-rw-r--r-- 1 wearefam wearefam 7663882 Jun 2 11:41
linux-headers-3.4.0-git829f51d-1-ovl-generic_3.4.0+git829f51d-1~dileks1_amd64.deb
-rw-r--r-- 1 wearefam wearefam 42930438 Jun 2 11:42
linux-image-3.4.0-git829f51d-1-ovl-generic_3.4.0+git829f51d-1~dileks1_amd64.deb
-rw-r--r-- 1 wearefam wearefam 900526 Jun 2 11:41
linux-libc-dev_3.4.0+git829f51d-1~dileks1_amd64.deb

The only thing I was wondering is that CONFIG_ACPI_PROCFS_POWER is
still present as it should be removed with v2.6.39 (see below P.S.).

[ 0.720019] ACPI: Deprecated procfs I/F for AC is loaded, please
retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.732591] ACPI: Deprecated procfs I/F for battery is loaded,
please retry with CONFIG_ACPI_PROCFS_POWER cleared

CONFIG_ACPI_PROCFS_POWER=y

Beside this "cosmetic" issue I can say this kernel runs OK for approx.
one day (~18hrs).

Hope this feedback helps to get ACPI stuff pulled into v3.5-rc1.

[ Full dmesg and kernel-config attached. ]

- Sedat -

[1] http://marc.info/?l=linux-kernel&m=133861900203085&w=2

P.S.:

Documentation/feature-removal-schedule.txt-188----------------------------
Documentation/feature-removal-schedule.txt-189-
Documentation/feature-removal-schedule.txt:190:What: CONFIG_ACPI_PROCFS_POWER
Documentation/feature-removal-schedule.txt-191-When: 2.6.39
Documentation/feature-removal-schedule.txt-192-Why: sysfs I/F for
ACPI power devices, including AC and Battery,
Documentation/feature-removal-schedule.txt-193- has been
working in upstream kernel since 2.6.24, Sep 2007.
Documentation/feature-removal-schedule.txt-194- In 2.6.37, we make the
sysfs I/F always built in and this option
Documentation/feature-removal-schedule.txt-195- disabled by default.
Documentation/feature-removal-schedule.txt-196- Remove this option and
the ACPI power procfs interface in 2.6.39.
Documentation/feature-removal-schedule.txt-197-Who: Zhang Rui
<rui.zhang@intel.com>
Documentation/feature-removal-schedule.txt-198-
Documentation/feature-removal-schedule.txt-199----------------------------

[ drivers/acpi/Kconfig ]

config ACPI_PROCFS_POWER
bool "Deprecated power /proc/acpi directories"
depends on PROC_FS
help
For backwards compatibility, this option allows
deprecated power /proc/acpi/ directories to exist, even when
they have been replaced by functions in /sys.
The deprecated directories (and their replacements) include:
/proc/acpi/battery/* (/sys/class/power_supply/*)
/proc/acpi/ac_adapter/* (sys/class/power_supply/*)
This option has no effect on /proc/acpi/ directories
and functions, which do not yet exist in /sys
This option, together with the proc directories, will be
deleted in 2.6.39.

Say N to delete power /proc/acpi/ directories that have moved to /sys/
- EOT-
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-git829f51d-1-ovl-generic (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP Sat Jun 2 11:33:53 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-git829f51d-1-ovl-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1f923000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[ 0.000000] [mem 0x100000000-0x11fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x11fdfffff @ [mem 0xd9b9a000-0xd9c9efff]
[ 0.000000] RAMDISK: [mem 0x3657a000-0x372b4fff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe120 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[ 0.000000] NODE_DATA [mem 0x11fdfc000-0x11fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
[ 0.000000] On node 0 totalpages: 1021485
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 870624 pages, LIFO batch:31
[ 0.000000] Normal zone: 2040 pages used for memmap
[ 0.000000] Normal zone: 128520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003055
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-git829f51d-1-ovl-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3924084k/4716544k available (6600k kernel code, 630604k absent, 161856k reserved, 6562k data, 912k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1596.464 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.92 BogoMIPS (lpj=6385856)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000041] AppArmor: AppArmor initialized
[ 0.000379] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001427] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001871] Mount-cache hash table entries: 256
[ 0.002055] Initializing cgroup subsys cpuacct
[ 0.002057] Initializing cgroup subsys memory
[ 0.002064] Initializing cgroup subsys devices
[ 0.002066] Initializing cgroup subsys freezer
[ 0.002067] Initializing cgroup subsys blkio
[ 0.002069] Initializing cgroup subsys perf_event
[ 0.002094] Disabled fast string operations
[ 0.002096] CPU: Physical Processor ID: 0
[ 0.002097] CPU: Processor Core ID: 0
[ 0.002102] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002102] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002105] mce: CPU supports 7 MCE banks
[ 0.002117] CPU0: Thermal monitoring enabled (TM1)
[ 0.002124] using mwait in idle threads.
[ 0.004228] ACPI: Core revision 20120518
[ 0.011073] ftrace: allocating 24554 entries in 96 pages
[ 0.024827] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064489] CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz stepping 07
[ 0.172246] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.172248] PEBS disabled due to CPU errata.
[ 0.172249] ... version: 3
[ 0.172250] ... bit width: 48
[ 0.172251] ... generic registers: 4
[ 0.172252] ... value mask: 0000ffffffffffff
[ 0.172253] ... max period: 000000007fffffff
[ 0.172254] ... fixed-purpose events: 3
[ 0.172255] ... event mask: 000000070000000f
[ 0.172461] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.183607] Disabled fast string operations
[ 0.185724] Booting Node 0, Processors #1
[ 0.185725] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.196832] Disabled fast string operations
[ 0.198939] #2
[ 0.198940] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.210040] Disabled fast string operations
[ 0.212150] #3
[ 0.212150] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.212183] Brought up 4 CPUs
[ 0.212185] Total of 4 processors activated (12771.71 BogoMIPS).
[ 0.216006] devtmpfs: initialized
[ 0.216917] initlevel:0=early, 5 registered initcalls
[ 0.216943] EVM: security.selinux
[ 0.216944] EVM: security.SMACK64
[ 0.216945] EVM: security.capability
[ 0.216970] initlevel:1=core, 34 registered initcalls
[ 0.216993] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.217762] dummy:
[ 0.217793] RTC time: 18:58:04, date: 06/02/12
[ 0.217826] NET: Registered protocol family 16
[ 0.217833] initlevel:2=postcore, 16 registered initcalls
[ 0.217934] initlevel:3=arch, 12 registered initcalls
[ 0.217977] ACPI: bus type pci registered
[ 0.218041] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.218043] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.225449] PCI: Using configuration type 1 for base access
[ 0.225455] initlevel:4=subsys, 81 registered initcalls
[ 0.226281] bio: create slab <bio-0> at 0
[ 0.226352] ACPI: Added _OSI(Module Device)
[ 0.226354] ACPI: Added _OSI(Processor Device)
[ 0.226355] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.226357] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.227838] ACPI: EC: Look up EC in DSDT
[ 0.229362] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.231892] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.233124] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.233505] ACPI: Dynamic OEM Table Load:
[ 0.233509] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.233782] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.234191] ACPI: Dynamic OEM Table Load:
[ 0.234195] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.234310] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.234685] ACPI: Dynamic OEM Table Load:
[ 0.234688] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.236198] ACPI: Interpreter enabled
[ 0.236219] ACPI: (supports S0 S1 S3 S5)
[ 0.236224] ACPI: Using IOAPIC for interrupt routing
[ 0.241086] ACPI: Power Resource [FN00] (off)
[ 0.241159] ACPI: Power Resource [FN01] (off)
[ 0.241229] ACPI: Power Resource [FN02] (off)
[ 0.241298] ACPI: Power Resource [FN03] (off)
[ 0.241369] ACPI: Power Resource [FN04] (off)
[ 0.241657] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.241831] ACPI: No dock devices found.
[ 0.241834] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.242224] \_SB_.PCI0:_OSC invalid UUID
[ 0.242226] _OSC request data:1 8 1f
[ 0.242229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.242628] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.242630] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.242632] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.242635] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 0.242636] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.242664] PCI host bridge to bus 0000:00
[ 0.242666] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.242668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.242670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.242671] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.242673] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.242682] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.242723] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.242735] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.242742] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.242747] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 0.242807] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.242833] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.242915] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.242956] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.242979] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[ 0.243076] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.243106] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.243123] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.243197] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.243223] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.243309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.243339] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.243425] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.243458] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.243590] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.243636] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.243659] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[ 0.243756] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.243785] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.243919] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.243940] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
[ 0.243949] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
[ 0.243957] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
[ 0.243966] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
[ 0.243975] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 0.243984] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[ 0.244034] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.244055] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.244072] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.244095] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.244341] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.244506] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.245228] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.252321] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.252328] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.252463] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.252531] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.252653] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.252723] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.253049] pci 0000:02:00.0: supports D1 D2
[ 0.253051] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260246] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.260256] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.260281] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.260411] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.260448] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.260647] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.268231] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.268245] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.268286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.268394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.268429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.268459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.268588] \_SB_.PCI0:_OSC invalid UUID
[ 0.268591] _OSC request data:1 1f 1f
[ 0.268593] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.268668] \_SB_.PCI0:_OSC invalid UUID
[ 0.268670] _OSC request data:1 0 1d
[ 0.268672] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.268673] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.271274] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.271320] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.271366] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.271410] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.271453] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.271497] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.271540] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.271583] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.271663] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271669] vgaarb: loaded
[ 0.271670] vgaarb: bridge control possible 0000:00:02.0
[ 0.271778] SCSI subsystem initialized
[ 0.271820] libata version 3.00 loaded.
[ 0.271839] ACPI: bus type usb registered
[ 0.271855] usbcore: registered new interface driver usbfs
[ 0.271862] usbcore: registered new interface driver hub
[ 0.271883] usbcore: registered new device driver usb
[ 0.271946] PCI: Using ACPI for IRQ routing
[ 0.273584] PCI: pci_cache_line_size set to 64 bytes
[ 0.273705] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.273707] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.273709] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.273710] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.273786] NetLabel: Initializing
[ 0.273788] NetLabel: domain hash size = 128
[ 0.273789] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273798] NetLabel: unlabeled traffic allowed by default
[ 0.273829] initlevel:5=fs, 31 registered initcalls
[ 0.273864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.273866] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.275876] Switching to clocksource hpet
[ 0.281304] AppArmor: AppArmor Filesystem Enabled
[ 0.281329] pnp: PnP ACPI init
[ 0.281342] ACPI: bus type pnp registered
[ 0.281599] pnp 00:00: [bus 00-3e]
[ 0.281602] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.281604] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.281605] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.281607] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.281609] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.281610] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.281612] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.281613] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.281615] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.281616] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.281618] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.281619] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.281621] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.281623] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.281624] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.281626] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.281627] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.281631] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 0.281632] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.281700] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.281987] pnp 00:01: [io 0x0000-0x001f]
[ 0.282006] pnp 00:01: [io 0x0081-0x0091]
[ 0.282008] pnp 00:01: [io 0x0093-0x009f]
[ 0.282009] pnp 00:01: [io 0x00c0-0x00df]
[ 0.282011] pnp 00:01: [dma 4]
[ 0.282031] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.282039] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.282058] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.282130] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.282148] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.282157] pnp 00:04: [io 0x00f0]
[ 0.282167] pnp 00:04: [irq 13]
[ 0.282186] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.282198] pnp 00:05: [io 0x002e-0x002f]
[ 0.282200] pnp 00:05: [io 0x004e-0x004f]
[ 0.282201] pnp 00:05: [io 0x0061]
[ 0.282202] pnp 00:05: [io 0x0063]
[ 0.282204] pnp 00:05: [io 0x0065]
[ 0.282205] pnp 00:05: [io 0x0067]
[ 0.282206] pnp 00:05: [io 0x0070]
[ 0.282207] pnp 00:05: [io 0x0080]
[ 0.282209] pnp 00:05: [io 0x0092]
[ 0.282210] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.282211] pnp 00:05: [io 0x0680-0x069f]
[ 0.282213] pnp 00:05: [io 0x1000-0x100f]
[ 0.282214] pnp 00:05: [io 0x5000-0x5003]
[ 0.282216] pnp 00:05: [io 0xffff]
[ 0.282217] pnp 00:05: [io 0x0400-0x0453]
[ 0.282218] pnp 00:05: [io 0x0458-0x047f]
[ 0.282220] pnp 00:05: [io 0x0500-0x057f]
[ 0.282221] pnp 00:05: [io 0x0a00-0x0a0f]
[ 0.282222] pnp 00:05: [io 0x164e-0x164f]
[ 0.282223] pnp 00:05: [io 0x5000-0x500f]
[ 0.282262] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.282265] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.282266] system 00:05: [io 0x5000-0x5003] has been reserved
[ 0.282268] system 00:05: [io 0xffff] has been reserved
[ 0.282270] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.282272] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.282273] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.282275] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.282277] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.282279] system 00:05: [io 0x5000-0x500f] could not be reserved
[ 0.282281] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282288] pnp 00:06: [io 0x0070-0x0077]
[ 0.282293] pnp 00:06: [irq 8]
[ 0.282312] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.282337] pnp 00:07: [io 0x0454-0x0457]
[ 0.282365] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.282367] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.282380] pnp 00:08: [io 0x0060]
[ 0.282381] pnp 00:08: [io 0x0064]
[ 0.282386] pnp 00:08: [irq 1]
[ 0.282407] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.282435] pnp 00:09: [irq 12]
[ 0.282456] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.282581] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.282583] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.282584] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.282586] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.282589] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.282590] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.282592] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.282593] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.282595] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.282596] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.282598] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.282631] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.282633] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.282634] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.282636] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.282638] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.282640] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.282642] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.282643] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.282645] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.282647] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.282649] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282981] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120518/utresrc-650)
[ 0.282983] pnp 00:0b: can't evaluate _CRS: 12311
[ 0.283103] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.283128] pnp: PnP ACPI: found 12 devices
[ 0.283129] ACPI: ACPI bus type pnp unregistered
[ 0.289564] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.289571] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.289581] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.289584] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.289592] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.289599] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.289605] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.289647] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.289649] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.289650] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.289652] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.289654] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.289656] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.289658] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.289659] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.289661] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.289689] NET: Registered protocol family 2
[ 0.289810] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.291029] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.292807] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.293028] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.293029] TCP: reno registered
[ 0.293037] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.293058] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.293131] NET: Registered protocol family 1
[ 0.293144] pci 0000:00:02.0: Boot video device
[ 0.293331] PCI: CLS 64 bytes, default 64
[ 0.293372] Trying to unpack rootfs image as initramfs...
[ 0.564911] Freeing initrd memory: 13548k freed
[ 0.568005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.568010] software IO TLB [mem 0xd5b9a000-0xd9b99fff] (64MB) mapped at [ffff8800d5b9a000-ffff8800d9b99fff]
[ 0.568013] initlevel:6=device, 270 registered initcalls
[ 0.568510] audit: initializing netlink socket (disabled)
[ 0.568526] type=2000 audit(1338663484.460:1): initialized
[ 0.591298] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.592784] VFS: Disk quotas dquot_6.5.2
[ 0.592820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.593194] fuse init (API version 7.18)
[ 0.593261] msgmni has been set to 7690
[ 0.593559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.593587] io scheduler noop registered
[ 0.593589] io scheduler deadline registered
[ 0.593612] io scheduler cfq registered (default)
[ 0.593826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.593841] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.593893] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.593894] vesafb: scrolling: redraw
[ 0.593896] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.594280] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 3072k, total 3072k
[ 0.657064] Console: switching to colour frame buffer device 128x48
[ 0.719799] fb0: VESA VGA frame buffer device
[ 0.719810] intel_idle: MWAIT substates: 0x21120
[ 0.719812] intel_idle: v0.4 model 0x2A
[ 0.719813] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.720019] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.720346] ACPI: AC Adapter [ADP1] (off-line)
[ 0.720406] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.720421] ACPI: Lid Switch [LID0]
[ 0.720452] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.720455] ACPI: Power Button [PWRB]
[ 0.720485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.720487] ACPI: Power Button [PWRF]
[ 0.720535] ACPI: Fan [FAN0] (off)
[ 0.720559] ACPI: Fan [FAN1] (off)
[ 0.720582] ACPI: Fan [FAN2] (off)
[ 0.720605] ACPI: Fan [FAN3] (off)
[ 0.720628] ACPI: Fan [FAN4] (off)
[ 0.720671] ACPI: Requesting acpi_cpufreq
[ 0.726310] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.726313] ACPI: Thermal Zone [TZ00] (44 C)
[ 0.726459] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.726461] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.726484] GHES: HEST is not enabled!
[ 0.726547] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.729709] Linux agpgart interface v0.103
[ 0.729776] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.729861] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.730942] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.731047] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.732221] brd: module loaded
[ 0.732591] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.732596] ACPI: Battery Slot [BAT1] (battery present)
[ 0.732779] loop: module loaded
[ 0.732870] ahci 0000:00:1f.2: version 3.0
[ 0.732930] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.732965] ahci: SSS flag set, parallel bus scan disabled
[ 0.747610] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.747618] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.747627] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.771956] scsi0 : ahci
[ 0.772029] scsi1 : ahci
[ 0.772083] scsi2 : ahci
[ 0.772138] scsi3 : ahci
[ 0.772190] scsi4 : ahci
[ 0.772244] scsi5 : ahci
[ 0.772281] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[ 0.772284] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 40
[ 0.772285] ata3: DUMMY
[ 0.772288] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
[ 0.772291] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[ 0.772292] ata6: DUMMY
[ 0.772533] Fixed MDIO Bus: probed
[ 0.772545] tun: Universal TUN/TAP device driver, 1.6
[ 0.772546] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.772589] PPP generic driver version 2.4.2
[ 0.772663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.772694] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.772697] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.772732] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.772757] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.776632] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.776646] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.787540] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.787694] hub 1-0:1.0: USB hub found
[ 0.787698] hub 1-0:1.0: 2 ports detected
[ 0.787761] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.787765] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.787797] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.787820] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.791697] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.791727] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.803529] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.803671] hub 2-0:1.0: USB hub found
[ 0.803674] hub 2-0:1.0: 2 ports detected
[ 0.803719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.803727] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.803771] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.803801] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.813485] xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000
[ 0.813550] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.813555] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.813560] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.813564] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.813569] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.813722] xHCI xhci_add_endpoint called for root hub
[ 0.813723] xHCI xhci_check_bandwidth called for root hub
[ 0.813742] hub 3-0:1.0: USB hub found
[ 0.813750] hub 3-0:1.0: 2 ports detected
[ 0.813795] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.813827] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.813901] xHCI xhci_add_endpoint called for root hub
[ 0.813902] xHCI xhci_check_bandwidth called for root hub
[ 0.813920] hub 4-0:1.0: USB hub found
[ 0.813927] hub 4-0:1.0: 2 ports detected
[ 0.814033] usbcore: registered new interface driver libusual
[ 0.814064] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.819389] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.819393] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.819510] mousedev: PS/2 mouse device common for all mice
[ 0.819839] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.819868] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.819929] device-mapper: uevent: version 1.0.3
[ 0.819989] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.820062] cpuidle: using governor ladder
[ 0.820155] cpuidle: using governor menu
[ 0.820156] EFI Variables Facility v0.08 2004-May-17
[ 0.820231] TCP: cubic registered
[ 0.820313] NET: Registered protocol family 10
[ 0.820481] NET: Registered protocol family 17
[ 0.820498] Key type dns_resolver registered
[ 0.820500] initlevel:7=late, 46 registered initcalls
[ 0.820639] PM: Hibernation image not present or could not be loaded.
[ 0.820649] registered taskstats version 1
[ 0.823186] Key type trusted registered
[ 0.825488] Key type encrypted registered
[ 0.825597] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.828182] Magic number: 0:501:998
[ 0.828216] pnp 00:00: hash matches
[ 0.828306] rtc_cmos 00:06: setting system clock to 2012-06-02 18:58:05 UTC (1338663485)
[ 0.828988] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.828990] EDD information not available.
[ 1.091416] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.099405] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.121568] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 1.121582] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.122827] ata1.00: configured for UDMA/133
[ 1.123142] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 1.123333] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.123372] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.123377] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.123492] sd 0:0:0:0: [sda] Write Protect is off
[ 1.123496] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.123629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.161898] sda: sda1 sda2 sda3
[ 1.163264] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.232245] hub 1-1:1.0: USB hub found
[ 1.232446] hub 1-1:1.0: 6 ports detected
[ 1.343239] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.443167] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.443949] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.443954] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.444671] ata2.00: configured for UDMA/133
[ 1.444878] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
[ 1.445027] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.445082] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.445215] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.445221] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.445387] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.446684] sdb: sdb1 sdb2
[ 1.447084] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.475946] hub 2-1:1.0: USB hub found
[ 1.476146] hub 2-1:1.0: 6 ports detected
[ 1.547218] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 1.567064] Refined TSC clocksource calibration: 1596.374 MHz.
[ 1.567070] Switching to clocksource tsc
[ 1.762935] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.042867] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[ 2.082706] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.084966] Freeing unused kernel memory: 912k freed
[ 2.085120] Write protecting the kernel read-only data: 12288k
[ 2.091299] Freeing unused kernel memory: 1580k freed
[ 2.096231] Freeing unused kernel memory: 1224k freed
[ 2.116760] udevd[110]: starting version 175
[ 2.189269] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.189440] r8169 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.189712] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000066e000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 46
[ 2.189716] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.024020] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.465657] init: ureadahead main process (281) terminated with status 5
[ 6.391985] udevd[354]: starting version 175
[ 7.186277] lp: driver loaded but no devices found
[ 7.645107] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120518/utaddress-251)
[ 7.645110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.645112] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 7.645118] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120518/utaddress-251)
[ 7.645119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.645125] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120518/utaddress-251)
[ 7.645127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.645128] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.669368] mei 0000:00:16.0: setting latency timer to 64
[ 7.669439] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 7.669496] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 47
[ 7.670640] mei 0000:00:16.0: request_threaded_irq failure. irq = 47
[ 7.671581] mei 0000:00:16.0: initialization failed.
[ 7.672306] mei: probe of 0000:00:16.0 failed with error -22
[ 7.917483] samsung_laptop: detected SABI interface: SwSmi@
[ 7.917487] samsung_laptop: Backlight controlled by ACPI video driver
[ 8.003367] Bluetooth: Core ver 2.16
[ 8.003398] NET: Registered protocol family 31
[ 8.003400] Bluetooth: HCI device and connection manager initialized
[ 8.003403] Bluetooth: HCI socket layer initialized
[ 8.003405] Bluetooth: L2CAP socket layer initialized
[ 8.003412] Bluetooth: SCO socket layer initialized
[ 8.071520] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 8.171723] cfg80211: Calling CRDA to update world regulatory domain
[ 8.363059] usbcore: registered new interface driver btusb
[ 8.450723] [drm] Initialized drm 1.1.0 20060810
[ 8.955384] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 8.972399] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 9.049804] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input4
[ 9.150176] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 9.151872] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 9.153507] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 9.155181] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.423930] i915 0000:00:02.0: setting latency timer to 64
[ 9.467114] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 9.467125] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.467127] [drm] Driver supports precise vblank timestamp query.
[ 9.467170] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.552442] Linux video capture interface: v2.00
[ 9.646290] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 9.646294] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 9.646435] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000
[ 9.646437] iwlwifi 0000:01:00.0: pci_resource_base = ffffc900050ac000
[ 9.646440] iwlwifi 0000:01:00.0: HW Revision ID = 0x34
[ 9.646657] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
[ 9.993171] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 9.993243] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 9.993750] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.993755] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 9.993758] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 9.993760] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 9.993762] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 9.993765] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 9.993902] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 10.009274] iwlwifi 0000:01:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 10.009278] iwlwifi 0000:01:00.0: Device SKU: 0x1F0
[ 10.009280] iwlwifi 0000:01:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 10.009305] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.009441] Registered led device: phy0-led
[ 10.009471] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 10.013233] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
[ 10.013338] usbcore: registered new interface driver uvcvideo
[ 10.013341] USB Video Class driver (1.1.1)
[ 10.103574] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.104825] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 10.307007] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 10.307011] cfg80211: World regulatory domain updated:
[ 10.307013] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.307015] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.307018] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.307019] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.307021] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.307022] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.554539] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 10.554544] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 10.554593] Console: switching to colour dummy device 80x25
[ 10.554816] fbcon: inteldrmfb (fb0) is primary device
[ 10.677963] type=1400 audit(1338656295.352:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=763 comm="apparmor_parser"
[ 10.677975] type=1400 audit(1338656295.352:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=728 comm="apparmor_parser"
[ 10.678443] type=1400 audit(1338656295.352:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser"
[ 10.678457] type=1400 audit(1338656295.352:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=728 comm="apparmor_parser"
[ 10.678717] type=1400 audit(1338656295.352:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=763 comm="apparmor_parser"
[ 10.678732] type=1400 audit(1338656295.352:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=728 comm="apparmor_parser"
[ 10.679246] type=1400 audit(1338656295.352:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=741 comm="apparmor_parser"
[ 10.679827] type=1400 audit(1338656295.352:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=741 comm="apparmor_parser"
[ 10.680218] type=1400 audit(1338656295.352:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=741 comm="apparmor_parser"
[ 10.728636] Console: switching to colour frame buffer device 170x48
[ 10.832866] fb0: inteldrmfb frame buffer device
[ 10.832867] drm: registered panic notifier
[ 10.834319] acpi device:33: registered as cooling_device9
[ 10.834561] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.834620] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 10.834913] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.836603] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 11.400579] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.400797] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.401000] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.751687] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
[ 13.921197] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 14.258499] init: failsafe main process (888) killed by TERM signal
[ 14.352372] usb 2-1.5: USB disconnect, device number 3
[ 14.904560] type=1400 audit(1338656299.580:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=977 comm="apparmor_parser"
[ 15.663260] ppdev: user-space parallel port driver
[ 15.872101] audit_printk_skb: 48 callbacks suppressed
[ 15.872105] type=1400 audit(1338656300.548:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1067 comm="apparmor_parser"
[ 15.872677] type=1400 audit(1338656300.548:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1067 comm="apparmor_parser"
[ 16.430842] Bluetooth: RFCOMM TTY layer initialized
[ 16.430851] Bluetooth: RFCOMM socket layer initialized
[ 16.430853] Bluetooth: RFCOMM ver 1.11
[ 16.604103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.604108] Bluetooth: BNEP filters: protocol multicast
[ 19.295143] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 19.301732] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 19.597255] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 19.603843] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 19.711685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.923252] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 19.937799] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 26.120349] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 26.129734] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 26.131583] wlan0: authenticated
[ 26.133610] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 26.137647] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 26.137651] wlan0: associated
[ 26.142909] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 71.256721] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 71.272638] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 71.272646] cfg80211: Restoring regulatory settings
[ 71.272651] cfg80211: Calling CRDA to update world regulatory domain
[ 71.276986] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 71.276991] cfg80211: World regulatory domain updated:
[ 71.276992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 71.276995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 71.276997] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 71.276998] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 71.277000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 71.277001] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.183908] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 77.185777] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 77.187500] wlan0: authenticated
[ 77.189466] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 77.194600] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 77.194606] wlan0: associated
[ 122.228036] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 122.285947] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 122.285954] cfg80211: Restoring regulatory settings
[ 122.285959] cfg80211: Calling CRDA to update world regulatory domain
[ 122.292281] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 122.292286] cfg80211: World regulatory domain updated:
[ 122.292288] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 122.292292] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 122.292295] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 122.292297] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 122.292300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 122.292302] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 128.247342] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 128.250798] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 128.253857] wlan0: authenticated
[ 128.257317] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 128.261191] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 128.261196] wlan0: associated
[ 157.562472] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 157.571762] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 157.571774] cfg80211: Restoring regulatory settings
[ 157.571786] cfg80211: Calling CRDA to update world regulatory domain
[ 157.583112] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 157.583119] cfg80211: World regulatory domain updated:
[ 157.583122] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 157.583127] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 157.583131] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 157.583134] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 157.583137] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 157.583140] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 171.149709] cfg80211: Calling CRDA to update world regulatory domain
[ 171.166818] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 171.166825] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 171.167103] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000
[ 171.167111] iwlwifi 0000:01:00.0: pci_resource_base = ffffc900050ac000
[ 171.167117] iwlwifi 0000:01:00.0: HW Revision ID = 0x34
[ 171.167796] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
[ 171.168587] cfg80211: World regulatory domain updated:
[ 171.168594] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 171.168602] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 171.168607] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 171.168613] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 171.168617] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 171.168622] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 171.173856] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 171.174319] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 171.174324] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 171.174327] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 171.174329] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 171.174332] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 171.174336] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 171.174601] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 171.191685] iwlwifi 0000:01:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 171.191688] iwlwifi 0000:01:00.0: Device SKU: 0x1F0
[ 171.191691] iwlwifi 0000:01:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 171.191715] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 171.191824] Registered led device: phy0-led
[ 171.191854] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 171.191973] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 176.875788] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 176.882424] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 177.186703] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 177.193408] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 177.300781] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 177.462213] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 177.527534] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 183.710097] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 183.719510] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 183.721459] wlan0: authenticated
[ 183.722074] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 183.725979] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 183.725988] wlan0: associated
[ 183.731153] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 334.887723] type=1400 audit(1338656618.889:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1068 comm="cupsd" pid=1068 comm="cupsd" capability=36 capname="epollwakeup"
[ 1186.328209] type=1400 audit(1338657470.929:31): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1068 comm="cupsd" pid=1068 comm="cupsd" capability=36 capname="epollwakeup"
[ 2025.720510] type=1400 audit(1338658310.917:32): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1068 comm="cupsd" pid=1068 comm="cupsd" capability=36 capname="epollwakeup"
[ 3704.558948] type=1400 audit(1338659990.945:33): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1068 comm="cupsd" pid=1068 comm="cupsd" capability=36 capname="epollwakeup"
[ 7654.148462] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 7654.159744] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7654.159753] cfg80211: Restoring regulatory settings
[ 7654.159762] cfg80211: Calling CRDA to update world regulatory domain
[ 7654.177752] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7654.177756] cfg80211: World regulatory domain updated:
[ 7654.177757] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7654.177759] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7654.177761] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7654.177763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7654.177764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7654.177766] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7656.444365] PM: Syncing filesystems ... done.
[ 7656.444370] PM: Preparing system for mem sleep
[ 7657.200754] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 7657.216809] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 7657.216813] PM: Entering mem sleep
[ 7657.216904] Suspending console(s) (use no_console_suspend to debug)
[ 7657.217194] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 7657.217473] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7657.217680] sd 0:0:0:0: [sda] Stopping disk
[ 7657.219962] sd 1:0:0:0: [sdb] Stopping disk
[ 7657.824324] PM: suspend of devices complete after 607.728 msecs
[ 7657.824327] PM: suspend devices took 0.608 seconds
[ 7657.824474] PM: late suspend of devices complete after 0.145 msecs
[ 7657.840427] r8169 0000:02:00.0: wake-up capability enabled by ACPI
[ 7657.904316] PM: noirq suspend of devices complete after 79.892 msecs
[ 7657.904649] ACPI: Preparing to enter system sleep state S3
[ 7657.928370] PM: Saving platform NVS memory
[ 7657.935236] Disabling non-boot CPUs ...
[ 7657.936824] CPU 1 is now offline
[ 7658.040147] CPU 2 is now offline
[ 7658.040810] Broke affinity for irq 9
[ 7658.040828] Broke affinity for irq 16
[ 7658.144039] CPU 3 is now offline
[ 7658.144416] Extended CMOS year: 2000
[ 7658.145762] ACPI: Low-level resume complete
[ 7658.145810] PM: Restoring platform NVS memory
[ 7658.147029] Extended CMOS year: 2000
[ 7658.147109] Enabling non-boot CPUs ...
[ 7658.147200] Booting Node 0 Processor 1 APIC 0x1
[ 7658.158239] Disabled fast string operations
[ 7658.160664] NMI watchdog: enabled, takes one hw-pmu counter.
[ 7658.160969] CPU1 is up
[ 7658.161066] Booting Node 0 Processor 2 APIC 0x2
[ 7658.172102] Disabled fast string operations
[ 7658.174456] NMI watchdog: enabled, takes one hw-pmu counter.
[ 7658.174757] CPU2 is up
[ 7658.174936] Booting Node 0 Processor 3 APIC 0x3
[ 7658.185971] Disabled fast string operations
[ 7658.188349] NMI watchdog: enabled, takes one hw-pmu counter.
[ 7658.188714] CPU3 is up
[ 7658.193679] ACPI: Waking up from system sleep state S3
[ 7659.055614] PM: noirq resume of devices complete after 1.418 msecs
[ 7659.055713] PM: early resume of devices complete after 0.057 msecs
[ 7659.055780] i915 0000:00:02.0: setting latency timer to 64
[ 7659.055792] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7659.055834] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7659.055854] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 7659.055916] r8169 0000:02:00.0: wake-up capability disabled by ACPI
[ 7659.055941] ahci 0000:00:1f.2: setting latency timer to 64
[ 7659.056005] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 7659.056040] usb usb3: root hub lost power or was reset
[ 7659.056042] usb usb4: root hub lost power or was reset
[ 7659.060759] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 7659.060767] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 7659.060774] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 7659.060781] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 7659.060787] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 7659.110023] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7659.306058] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 7659.389826] ata4: SATA link down (SStatus 0 SControl 300)
[ 7659.397787] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7659.402274] ata2.00: configured for UDMA/133
[ 7659.413796] ata5: SATA link down (SStatus 0 SControl 300)
[ 7659.417864] sd 1:0:0:0: [sdb] Starting disk
[ 7660.804781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7660.807148] ata1.00: configured for UDMA/133
[ 7660.820872] sd 0:0:0:0: [sda] Starting disk
[ 7660.848994] PM: resume of devices complete after 1794.548 msecs
[ 7660.849067] PM: resume devices took 1.796 seconds
[ 7660.849098] PM: Finishing wakeup.
[ 7660.857084] Restarting tasks ... done.
[ 7660.860750] video LNXVIDEO:00: Restoring backlight state
[ 7660.920702] usb 2-1.4: new low-speed USB device number 4 using ehci_hcd
[ 7661.070801] usbcore: registered new interface driver usbhid
[ 7661.070804] usbhid: USB HID core driver
[ 7661.095246] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
[ 7661.095550] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[ 7661.265429] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 7661.272023] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 7661.383632] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7667.692440] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 7667.698061] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 7667.699797] wlan0: authenticated
[ 7667.703845] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 7667.707369] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 7667.707375] wlan0: associated
[ 7667.714489] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9061.686579] CPU2: Package power limit notification (total events = 1)
[ 9061.686583] CPU0: Package power limit notification (total events = 1)
[ 9061.686584] CPU1: Package power limit notification (total events = 1)
[ 9061.686586] CPU3: Package power limit notification (total events = 1)
[ 9061.686673] CPU0: Package power limit normal
[ 9061.686688] CPU3: Package power limit normal
[ 9061.686688] CPU1: Package power limit normal
[ 9061.686691] CPU2: Package power limit normal
[ 9849.765035] CPU1: Package power limit notification (total events = 85)
[ 9849.765039] CPU2: Package power limit notification (total events = 85)
[ 9849.765042] CPU3: Package power limit notification (total events = 85)
[ 9849.765044] CPU0: Package power limit notification (total events = 85)
[ 9849.765783] CPU1: Package power limit normal
[ 9849.765784] CPU0: Package power limit normal
[ 9849.765786] CPU3: Package power limit normal
[ 9849.765788] CPU2: Package power limit normal
[ 9926.721384] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 9926.739942] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 9926.739946] cfg80211: Restoring regulatory settings
[ 9926.739951] cfg80211: Calling CRDA to update world regulatory domain
[ 9926.868641] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 9926.868644] cfg80211: World regulatory domain updated:
[ 9926.868646] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9926.868648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9926.868649] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9926.868650] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9926.868652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9926.868653] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9928.964019] PM: Syncing filesystems ... done.
[ 9928.964025] PM: Preparing system for mem sleep
[ 9929.579069] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9929.595131] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9929.595134] PM: Entering mem sleep
[ 9929.595203] Suspending console(s) (use no_console_suspend to debug)
[ 9929.595494] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 9929.595589] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9929.595892] sd 0:0:0:0: [sda] Stopping disk
[ 9929.645360] sd 1:0:0:0: [sdb] Stopping disk
[ 9930.190670] PM: suspend of devices complete after 595.791 msecs
[ 9930.190673] PM: suspend devices took 0.596 seconds
[ 9930.190797] PM: late suspend of devices complete after 0.121 msecs
[ 9930.206766] r8169 0000:02:00.0: wake-up capability enabled by ACPI
[ 9930.270647] PM: noirq suspend of devices complete after 79.902 msecs
[ 9930.270879] ACPI: Preparing to enter system sleep state S3
[ 9930.294692] PM: Saving platform NVS memory
[ 9930.299535] Disabling non-boot CPUs ...
[ 9930.402496] CPU 1 is now offline
[ 9930.506428] CPU 2 is now offline
[ 9930.610316] CPU 3 is now offline
[ 9930.610696] Extended CMOS year: 2000
[ 9930.611942] ACPI: Low-level resume complete
[ 9930.611989] PM: Restoring platform NVS memory
[ 9930.613224] Extended CMOS year: 2000
[ 9930.613269] Enabling non-boot CPUs ...
[ 9930.613360] Booting Node 0 Processor 1 APIC 0x1
[ 9930.624362] Disabled fast string operations
[ 9930.626702] NMI watchdog: enabled, takes one hw-pmu counter.
[ 9930.627071] CPU1 is up
[ 9930.627179] Booting Node 0 Processor 2 APIC 0x2
[ 9930.638217] Disabled fast string operations
[ 9930.640554] NMI watchdog: enabled, takes one hw-pmu counter.
[ 9930.640850] CPU2 is up
[ 9930.640939] Booting Node 0 Processor 3 APIC 0x3
[ 9930.651976] Disabled fast string operations
[ 9930.654334] NMI watchdog: enabled, takes one hw-pmu counter.
[ 9930.654639] CPU3 is up
[ 9930.659614] ACPI: Waking up from system sleep state S3
[ 9930.706973] PM: noirq resume of devices complete after 2.109 msecs
[ 9930.707078] PM: early resume of devices complete after 0.064 msecs
[ 9930.707152] i915 0000:00:02.0: setting latency timer to 64
[ 9930.707161] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 9930.707203] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9930.707230] ahci 0000:00:1f.2: setting latency timer to 64
[ 9930.707243] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 9930.707373] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 9930.707385] r8169 0000:02:00.0: wake-up capability disabled by ACPI
[ 9930.707542] usb usb3: root hub lost power or was reset
[ 9930.707544] usb usb4: root hub lost power or was reset
[ 9930.712230] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 9930.712238] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 9930.712244] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 9930.712251] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 9930.712257] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 9930.766429] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9931.032546] ata5: SATA link down (SStatus 0 SControl 300)
[ 9931.040545] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9931.044898] ata2.00: configured for UDMA/133
[ 9931.048528] ata4: SATA link down (SStatus 0 SControl 300)
[ 9931.060593] sd 1:0:0:0: [sdb] Starting disk
[ 9931.144531] usb 2-1.4: reset low-speed USB device number 4 using ehci_hcd
[ 9931.496444] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 9933.262937] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9933.265273] ata1.00: configured for UDMA/133
[ 9933.279211] sd 0:0:0:0: [sda] Starting disk
[ 9933.304183] PM: resume of devices complete after 2598.940 msecs
[ 9933.304257] PM: resume devices took 2.600 seconds
[ 9933.304288] PM: Finishing wakeup.
[ 9933.307777] Restarting tasks ... done.
[ 9933.317673] video LNXVIDEO:00: Restoring backlight state
[ 9933.769347] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 9933.776055] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 9933.886642] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9940.192088] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 9940.201651] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 9940.203449] wlan0: authenticated
[ 9940.206095] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 9940.210091] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
[ 9940.210099] wlan0: associated
[ 9940.214972] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[10324.176502] CPU2: Package power limit notification (total events = 91)
[10324.176504] CPU3: Package power limit notification (total events = 91)
[10324.176507] CPU1: Package power limit notification (total events = 91)
[10324.176511] CPU0: Package power limit notification (total events = 91)
[10324.176657] CPU2: Package power limit normal
[10324.176658] CPU3: Package power limit normal
[10324.176660] CPU1: Package power limit normal
[10324.176662] CPU0: Package power limit normal
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2012-06-03 06:01    [W:0.220 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site