lkml.org 
[lkml]   [2012]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/22] UBI: Fastmap: Fix PEB count assert
Date
Use also the bad PEB count value, otherwise the assert will fail
if the FLASH has bad blocks.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
drivers/mtd/ubi/wl.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 4d9384b..58d74e4 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1728,9 +1728,10 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
dbg_wl("found %i PEBs", found_pebs);

if (ubi->fm)
- ubi_assert(ubi->peb_count == found_pebs + ubi->fm->used_blocks);
+ ubi_assert(ubi->peb_count - ubi->bad_peb_count == \
+ found_pebs + ubi->fm->used_blocks);
else
- ubi_assert(ubi->peb_count == found_pebs);
+ ubi_assert(ubi->peb_count - ubi->bad_peb_count == found_pebs);

if (ubi->avail_pebs < WL_RESERVED_PEBS) {
ubi_err("no enough physical eraseblocks (%d, need %d)",
--
1.7.6.5


\
 
 \ /
  Last update: 2012-06-18 19:01    [W:0.123 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site