Messages in this thread Patch in this message | | | From | Roland Stigge <> | Subject | [PATCH v2 05/23] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration | Date | Thu, 14 Jun 2012 18:50:55 +0200 |
| |
This patch takes into account that the MTD NAND MLC controller needs more registers, located actually before the previously allocated memory range, already starting at 200a8000 instead of 200b0000.
Further, the interrupt for the controller is configured.
Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
--- arch/arm/boot/dts/lpc32xx.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi +++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi @@ -38,9 +38,10 @@ status = "disable"; }; - mlc: flash@200B0000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; - reg = <0x200B0000 0x1000>; + reg = <0x200a8000 0x11000>; + interrupts = <11 0>; status = "disable"; };
| |