[lkml]   [2012]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 00/23] ARM: LPC32xx specific updates for next
This patch set includes various updates for mach-lpc32xx, including DT binding
for serial, and dts updates. A new reference board is supported (EA3250). The
board support file phy3250.c is updated to become more general, useable for
other boards also. There is still board specific stuff in it, though (some
devicetree auxdata).

Further, clock updates, DMA support, MMC support and a defconfig update for
LPC32xx is included.

Signed-off-by: Roland Stigge <>

Applies to v3.5-rc2

Changes since v1:
* Don't use pointers to functions in dma init struct (Patch 4)
* Adjusted DT property status: "disable" -> "disabled" (Patch 15)
* defconfig: Added MTD_M25P80 (Patch 9)
* Fixed USB PHY I2C address for EA3250 (Patch 6)
* Added patches 16 through 23 by Alexandre Pereira da Silva

You can also pull from

git:// lpc32xx-next

Roland Stigge (15):
ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts
ARM: LPC32xx: Clock initialization for NAND controllers
ARM: LPC32xx: Remove SLC controller initialization from platform init
ARM: LPC32xx: Add DMA configuration to platform data
ARM: LPC32xx: Adjust dtsi file for MLC controller configuration
ARM: LPC32xx: Add dts for EA3250 reference board
ARM: LPC32xx: DTS adjustment for key matrix controller
ARM: LPC32xx: Clock adjustment for key matrix controller
ARM: LPC32xx: Defconfig update
ARM: LPC32xx: Add MMC controller support
ARM: LPC32xx: DTS adjustment for using pl18x primecell
ARM: LPC32xx: DT conversion of Standard UARTs
ARM: LPC32xx: High Speed UART configuration via DT
ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default
ARM: LPC32xx: Fix lpc32xx.dtsi status property: "disable" -> "disabled"
Alexandre Pereira da Silva (8):
ARM: LPC32XX: Build arch dtbs
ARM: LPC32xx: Add dt settings to the at25 node
ARM: LPC32xx: Remove spi chipselect request from board
ARM: LPC32xx: Remove spi chip definitions
ARM: LPC32xx: Cleanup board init, remove duplicate
ARM: LPC32xx: Move uart6 irda disable to serial.c
ARM: LPC32xx: Move i2s1 dma enabling to clock.c
ARM: LPC32xx: Remove duplicate usb host clock init

arch/arm/Kconfig | 2
arch/arm/boot/dts/ea3250.dts | 157 +++++++++++++++++++++++++++
arch/arm/boot/dts/lpc32xx.dtsi | 74 ++++++++----
arch/arm/boot/dts/phy3250.dts | 61 ++++++++++
arch/arm/configs/lpc32xx_defconfig | 24 +++-
arch/arm/mach-lpc32xx/Kconfig | 32 -----
arch/arm/mach-lpc32xx/Makefile.boot | 1
arch/arm/mach-lpc32xx/clock.c | 24 +++-
arch/arm/mach-lpc32xx/include/mach/gpio.h | 2
arch/arm/mach-lpc32xx/phy3250.c | 174 ++++++++++++------------------
arch/arm/mach-lpc32xx/serial.c | 90 +--------------
11 files changed, 383 insertions(+), 258 deletions(-)

 \ /
  Last update: 2012-06-14 19:42    [W:0.133 / U:0.512 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site