lkml.org 
[lkml]   [2012]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: File copy is very slow on linux-3.4.2 (or linux-3.3x) on a specific hardware: AMD FX-8150 + 990FX
Borislav Petkov wrote:
> There's something very wrong with this mail
>
> On Mon, Jun 11, 2012 at 09:54:16PM +0200, wallak@free.fr wrote:
>> I've a very annoying issue on recent kernel (linux-3.4.2-SMP) with my
>> main motherboard (AMD FX-8150 + 990FX - 8 cores 4.1GHz), file copy is
>> very slow (see below). The same kernel works flawlessly on an AMD
>> E450 2 cores motherboard.
>>
>> Linux-3.2.20 works properly on this hardware.
>> hdparm -t gives good results on both kernels.
>>
>> I've no idea where this bug come from. Do you have this issue on your
>> hardware ? A patch is available ?
>>
>>
>> *linux-3.4.2
>> dd if=../in/file_8gb.tmp of=tmp.tmp bs=1024k count=100
>> 100+0 records in
>> 100+0 records out
>> 104857600 bytes (105 MB) copied, 132.884 s, 789 kB/s
>>
>>
>> *linux-3.2.20
>> dd if=../in/file_8gb.tmp of=tmp.tmp bs=1024k count=100
>> 100+0 records in
>> 100+0 records out
>> 104857600 bytes (105 MB) copied, 3.30793 s, 31.7 MB/sa
> First of all, the above shows that 3.4.2 is roughly 20 times better than
> 3.2.20.
> But even if that were so, this is a wrong test to do since once you
> run it for the first time, the 100MB land in the page cache and every
> subsequent time you run the same thing, the same 100MB will come from
> memory so no I/O at all.

Kernel 3.4.2 is 40 times slower when duplicating a file. Otherwise
hdparm -t /dev/sda is a around 120MB/s, memory cache is probably not the
main issue here.

> What are you trying to achieve actually?
>
> And, if I assume you've sent the right config below, then there are some
> major issues with it:
>
>> #
>> # Automatically generated file; DO NOT EDIT.
>> # Linux/i386 3.4.2 Kernel Configuration
>> #
>> # CONFIG_64BIT is not set
>> CONFIG_X86_32=y
>> # CONFIG_X86_64 is not set
> Why in the hell are you using 32-bit kernel on an AMD64 processor? Any
> real reason?

You're right this is a 32 bits mode kernel compiled for test
purposes on a 64 bits processor. Nevertheless the AMD E450 motherboard
uses a 64 bits processor too, and works fine with this 32 bits kernel,
without the IO issue.

>> CONFIG_X86=y
>> CONFIG_INSTRUCTION_DECODER=y
>> CONFIG_OUTPUT_FORMAT="elf32-i386"
>> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
>> CONFIG_GENERIC_CMOS_UPDATE=y
>> CONFIG_CLOCKSOURCE_WATCHDOG=y
>> CONFIG_GENERIC_CLOCKEVENTS=y
>> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
>> CONFIG_LOCKDEP_SUPPORT=y
>> CONFIG_STACKTRACE_SUPPORT=y
>> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
>> CONFIG_MMU=y
> [ … ]
>
>> #
>> # Processor type and features
>> #
>> CONFIG_ZONE_DMA=y
>> CONFIG_TICK_ONESHOT=y
>> # CONFIG_NO_HZ is not set
>> CONFIG_HIGH_RES_TIMERS=y
>> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
>> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
>> CONFIG_SMP=y
>> CONFIG_X86_MPPARSE=y
>> # CONFIG_X86_BIGSMP is not set
>> CONFIG_X86_EXTENDED_PLATFORM=y
>> # CONFIG_X86_WANT_INTEL_MID is not set
>> # CONFIG_X86_RDC321X is not set
>> # CONFIG_X86_32_NON_STANDARD is not set
>> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
>> # CONFIG_X86_32_IRIS is not set
>> CONFIG_SCHED_OMIT_FRAME_POINTER=y
>> # CONFIG_PARAVIRT_GUEST is not set
>> CONFIG_NO_BOOTMEM=y
>> # CONFIG_MEMTEST is not set
>> # CONFIG_M386 is not set
>> # CONFIG_M486 is not set
>> # CONFIG_M586 is not set
>> # CONFIG_M586TSC is not set
>> # CONFIG_M586MMX is not set
>> # CONFIG_M686 is not set
>> # CONFIG_MPENTIUMII is not set
>> # CONFIG_MPENTIUMIII is not set
>> # CONFIG_MPENTIUMM is not set
>> # CONFIG_MPENTIUM4 is not set
>> # CONFIG_MK6 is not set
>> # CONFIG_MK7 is not set
>> # CONFIG_MK8 is not set
>> # CONFIG_MCRUSOE is not set
>> # CONFIG_MEFFICEON is not set
>> # CONFIG_MWINCHIPC6 is not set
>> # CONFIG_MWINCHIP3D is not set
>> # CONFIG_MELAN is not set
>> # CONFIG_MGEODEGX1 is not set
>> # CONFIG_MGEODE_LX is not set
>> # CONFIG_MCYRIXIII is not set
>> # CONFIG_MVIAC3_2 is not set
>> # CONFIG_MVIAC7 is not set
>> # CONFIG_MCORE2 is not set
>> CONFIG_MATOM=y
> You have a 64-bit AMD processor but you're enabling 32-bit Intel Atom
> optimizations, wtf?
>
> Why not CONFIG_MK8?
>
> Also, I noticed below you have IDE stuff enabled. Why? Why not AHCI and
> the corresponding ATA_SFF options?

I share this kernel with two other motherboards.
CONFIG_SATA_AHCI is enabled too, the HDD uses this driver.
> ...
>
>> # CONFIG_X86_GENERIC is not set
>> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
>> CONFIG_X86_CMPXCHG=y
>> CONFIG_X86_L1_CACHE_SHIFT=6
>> CONFIG_X86_XADD=y
>> CONFIG_X86_WP_WORKS_OK=y
>> CONFIG_X86_INVLPG=y
>> CONFIG_X86_BSWAP=y
>> CONFIG_X86_POPAD_OK=y
>> CONFIG_X86_USE_PPRO_CHECKSUM=y
>> CONFIG_X86_TSC=y
>> CONFIG_X86_CMPXCHG64=y
>> CONFIG_X86_CMOV=y
>> CONFIG_X86_MINIMUM_CPU_FAMILY=5
>> CONFIG_X86_DEBUGCTLMSR=y
>> CONFIG_CPU_SUP_INTEL=y
>> CONFIG_CPU_SUP_AMD=y
>> CONFIG_CPU_SUP_CENTAUR=y
>> CONFIG_CPU_SUP_TRANSMETA_32=y
>> CONFIG_HPET_TIMER=y
>> CONFIG_HPET_EMULATE_RTC=y
>> CONFIG_DMI=y
>> # CONFIG_IOMMU_HELPER is not set
>> CONFIG_NR_CPUS=8
>> # CONFIG_SCHED_SMT is not set
>> CONFIG_SCHED_MC=y
>> # CONFIG_IRQ_TIME_ACCOUNTING is not set
>> CONFIG_PREEMPT_NONE=y
>> # CONFIG_PREEMPT_VOLUNTARY is not set
>> # CONFIG_PREEMPT is not set
>> CONFIG_X86_LOCAL_APIC=y
>> CONFIG_X86_IO_APIC=y
>> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
>> CONFIG_X86_MCE=y
>> CONFIG_X86_MCE_INTEL=y
>> CONFIG_X86_MCE_AMD=y
>> # CONFIG_X86_ANCIENT_MCE is not set
>> CONFIG_X86_MCE_THRESHOLD=y
>> # CONFIG_X86_MCE_INJECT is not set
>> CONFIG_X86_THERMAL_VECTOR=y
>> CONFIG_VM86=y
>> # CONFIG_TOSHIBA is not set
>> CONFIG_I8K=m
>> # CONFIG_X86_REBOOTFIXUPS is not set
>> CONFIG_MICROCODE=y
>> CONFIG_MICROCODE_INTEL=y
>> CONFIG_MICROCODE_AMD=y
> This should be =m because otherwise you can't load microcode from
> userspace.
>
> All I'm saying is, take some time to configure your kernel properly by
> reading the help text of every option and enable only the ones you need.
>
> And search the net for more info on how to configure your kernel
> properly.
>
> HTH.
>
I don't think the issue came from this .config, linux-3.2.20 works fine
on this motherboard with a .config quite close.
This may be an issue on 32 bits mode SMP kernel only ? or something else ?

Is someone else have this issue ?

Best Regards
Wallak.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-06-12 02:21    [W:1.698 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site