lkml.org 
[lkml]   [2012]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver
On Mon, Jun 11, 2012 at 04:25:02PM +0100, Lee Jones wrote:
> Here we move the i2c-nomadik's default settings into the driver
> rather than specifying them from platform code. At the time of
> this writing we only have one user, the u8500. As new users are
> added, it is expected that they will be Device Tree compliant.
> If this is the case, we will look up their initialisation values
> by compatible entry, then apply them forthwith.
>
> Cc: linux-i2c@vger.kernel.org
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/i2c/busses/i2c-nomadik.c | 40 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
> index a92440d..1ffdf67 100644
> --- a/drivers/i2c/busses/i2c-nomadik.c
> +++ b/drivers/i2c/busses/i2c-nomadik.c
> @@ -23,6 +23,7 @@
> #include <linux/io.h>
> #include <linux/regulator/consumer.h>
> #include <linux/pm_runtime.h>
> +#include <linux/of_device.h>
>
> #include <plat/i2c.h>
>
> @@ -899,15 +900,51 @@ static const struct i2c_algorithm nmk_i2c_algo = {
> .functionality = nmk_i2c_functionality
> };
>
> +static struct nmk_i2c_controller u8500_i2c = {
> + /*
> + * slave data setup time, which is
> + * 250 ns,100ns,10ns which is 14,6,2
> + * respectively for a 48 Mhz
> + * i2c clock
> + */
> + .slsu = 0xe,
> + /* Tx FIFO threshold */

Please put these comments directly after the members they describe.

And make sure you use tabs for indentation all over the patch instead of
spaces. checkpatch.pl will help you to get the formal things right.

> + .tft = 1,
> + /* Rx FIFO threshold */
> + .rft = 8,
> + /* std. mode operation */
> + .clk_freq = 100000,
> + .timeout = 200, /* Slave response timeout(ms) */
> + .sm = I2C_FREQ_MODE_FAST,
> +};
> +
> +
> +static const struct of_device_id nmk_gpio_match[] = {
> + { .compatible = "st,nomadik-i2c", .data = &u8500_i2c, },
> + {}
> +};
> +
> static int __devinit nmk_i2c_probe(struct platform_device *pdev)
> {
> int ret = 0;
> struct resource *res;
> - struct nmk_i2c_controller *pdata =
> + const struct nmk_i2c_controller *pdata =
> pdev->dev.platform_data;
> + const struct of_device_id *of_id =
> + of_match_device(nmk_gpio_match, &pdev->dev);
> struct nmk_i2c_dev *dev;
> struct i2c_adapter *adap;
>
> + if (!pdata) {
> + if (of_id && of_id->data)
> + /* Looks like we're booting via Device Tree. */
> + pdata = of_id->data;
> + else
> + /* No i2c configuration found, using the default. */
> + pdata = &u8500_i2c;
> + }
> +
> dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
> if (!dev) {
> dev_err(&pdev->dev, "cannot allocate memory\n");
> @@ -1043,6 +1080,7 @@ static struct platform_driver nmk_i2c_driver = {
> .owner = THIS_MODULE,
> .name = DRIVER_NAME,
> .pm = &nmk_i2c_pm,
> + .of_match_table = nmk_gpio_match,
> },
> .probe = nmk_i2c_probe,
> .remove = __devexit_p(nmk_i2c_remove),
> --

Thanks,

Wolfram

--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-06-11 21:43    [W:0.519 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site