lkml.org 
[lkml]   [2012]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 2/2] 8139cp/8139too: terminate the eeprom access with the right opmode
From
Date
Currently, we terminate the eeprom access through clearing the CS by:

RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr);

This would left the eeprom into "Config. Register Write Enable:"
state which is not expcted as the highest two bits were set to
0x11 ( expected is the "Normal" mode (0x00)). Solving this by write
0x0 instead of ~EE_CS when terminating the eeprom access.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/net/ethernet/realtek/8139cp.c | 2 +-
drivers/net/ethernet/realtek/8139too.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 7f08779..995d0cf 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1636,7 +1636,7 @@ static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)

static void eeprom_cmd_end(void __iomem *ee_addr)
{
- writeb (~EE_CS, ee_addr);
+ writeb(0, ee_addr);
eeprom_delay ();
}

diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 03df076..1d83565 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1173,7 +1173,7 @@ static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_l
}

/* Terminate the EEPROM access. */
- RTL_W8 (Cfg9346, ~EE_CS);
+ RTL_W8(Cfg9346, 0);
eeprom_delay ();

return retval;


\
 
 \ /
  Last update: 2012-06-01 07:01    [W:0.078 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site