lkml.org 
[lkml]   [2012]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ACPI: Fix the irq0 assigning issue for AMILO PRO V2030 platform
Hello Tang-Feng,

This looks good, but especially w/ interrupt patches,
it is important to take logically independent baby steps.
So please break this patch into two, and add another small bit
in a 3 patch series:

1. allow the workaround to apply to non global_irq 2
2. delete the WARN from dmi_ignore_irq0_timer_override
as it causes alarm, but gives no benefit
3. add the DMI to invoke the workaround for this platform

thanks,
-Len Brown, Intel Open Source Technology Center

On 05/28/2012 10:43 PM, Feng Tang wrote:

> This is to fix the kernel bugzilla 40002: "IRQ 0 assigned to VGA"
> https://bugzilla.kernel.org/show_bug.cgi?id=40002
>
> The root cause is the buggy FW, whose ACPI tables assign the GSI 16
> to 2 irqs 0 and 16(VGA), and the VGA is the right owner of GSI 16.
> So add a quirk to ignore the irq0 overriding GSI 16 for the
> FUJITSU SIEMENS AMILO PRO V2030 platform will solve this issue.
>
> This also slightly modify the current irq0 override handling, as it
> only covered the irq0 overriding GSI 2 case.
>
> Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl>
> Signed-off-by: Feng Tang <feng.tang@intel.com>
> Cc: x86@kernel.org
> ---
> arch/x86/kernel/acpi/boot.c | 17 ++++++++++++++---
> 1 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index 4558f0d..06c78c3 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -416,12 +416,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
> return 0;
> }
>
> - if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
> + if (intsrc->source_irq == 0) {
> if (acpi_skip_timer_override) {
> - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
> + printk(PREFIX "BIOS IRQ0 override ignored.\n");
> return 0;
> }
> - if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
> +
> + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
> + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
> intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
> printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
> }
> @@ -1466,6 +1468,15 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
> DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
> },
> },
> + {
> + .callback = dmi_ignore_irq0_timer_override,
> + .ident = "FUJITSU SIEMENS",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
> + },
> + },
> +
> {}
> };
>




\
 
 \ /
  Last update: 2012-06-01 19:21    [W:0.080 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site