lkml.org 
[lkml]   [2012]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: also announce bcdDevice
Paul Bolle wrote:
> Currently announce_device() does print the idVendor and idProduct values
> but does not print the bcdDevice value. USB devices are accurately
> identified by all three values. See, for instance, the USB storage
> quirks which will only apply for a certain (range of) bcdDevice
> value(s). So it seems useful to also print bcdDevice when announcing USB
> devices.

Could it also report negotiated speed? full-speed, high-speed, super-speed?
Thanks,
Martin

>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> 0) This is something I ran into while trying to track down the log
> errors generated by each of the USB sticks I happen to have lying
> around. Of course, there are other ways to track down the bcdDevice
> value of a specific device ("lusb -v -d $vendorid:$productid | grep
> bcdDevice" or "usb-devices | grep $vendorid.*$productid" come to mind).
> But since idVendor and idProduct are already printed by this debugging
> aid I think adding bcdDevice makes sense too. But is this all worth the
> small bit of additional noise?
>
> 1) The patch generates a checkpatch warning: "quoted string split across
> lines". But since it is hard to grep for this entire string without
> knowing the printk "conversion specifications" in the string beforehand,
> I think the warning can be ignored here. Note that I actually found this
> string by git grepping for just "New USB device found".
>
> drivers/usb/core/Kconfig | 4 ++--
> drivers/usb/core/hub.c | 6 ++++--
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> index 18d02e3..85f795b 100644
> --- a/drivers/usb/core/Kconfig
> +++ b/drivers/usb/core/Kconfig
> @@ -14,8 +14,8 @@ config USB_ANNOUNCE_NEW_DEVICES
> depends on USB
> default N
> help
> - Say Y here if you want the USB core to always announce the
> - idVendor, idProduct, Manufacturer, Product, and SerialNumber
> + Say Y here if you want the USB core to always announce the idVendor,
> + idProduct, bcdDevice, Manufacturer, Product, and SerialNumber
> strings for every new USB device to the syslog. This option is
> usually used by distro vendors to help with debugging and to
> let users know what specific device was added to the machine
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index ec6c97d..6e1bfaea 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1726,9 +1726,11 @@ static void show_string(struct usb_device *udev, char *id, char *string)
>
> static void announce_device(struct usb_device *udev)
> {
> - dev_info(&udev->dev, "New USB device found, idVendor=%04x, idProduct=%04x\n",
> + dev_info(&udev->dev, "New USB device found, idVendor=%04x, "
> + "idProduct=%04x, bcdDevice=%04x\n",
> le16_to_cpu(udev->descriptor.idVendor),
> - le16_to_cpu(udev->descriptor.idProduct));
> + le16_to_cpu(udev->descriptor.idProduct),
> + le16_to_cpu(udev->descriptor.bcdDevice));
> dev_info(&udev->dev,
> "New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
> udev->descriptor.iManufacturer,


\
 
 \ /
  Last update: 2012-05-05 14:21    [W:0.059 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site