Messages in this thread | | | From | Comrade DOS <> | Date | Wed, 30 May 2012 03:20:27 +0700 | Subject | Re: PROBLEM: Performance drop |
| |
> Unfortunately you have used acpi=debug instead of apic=debug. So I > can't compare I/O APIC configurations between the different test > scenarios.
Sorry me for this mistake.
> So what I'd need next is a log (with apic=debug) from > - booting 3.3.5
I use linux 3.3.7 on this machine now. Log from 3.3.7:
Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.3.7-gentoo (root@dos) (gcc version 4.7.0 (Gentoo 4.7.0 p1.0, pie-0.5.3) ) #3 SMP PREEMPT Mon May 28 10:59:42 OMST 2012 Command line: root=/dev/sda3 apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120111/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs mapped IOAPIC to ffffffffff5fa000 (fec00000) nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71424 r8192 d22784 u1048576 pcpu-alloc: s71424 r8192 d22784 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853736k/5242880k available (4258k kernel code, 1180420k absent, 208724k reserved, 1892k data, 428k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.736 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.47 BogoMIPS (lpj=2190736) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120111 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246686 ... PM-Timer delta = 357901 ... PM-Timer result ok ..... delta 1246686 ..... mult: 53552896 ..... calibration result: 199469 ..... CPU clock speed is 2194.0168 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.47 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at b7fc8000 (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:04.0: [1002:7914] type 1 class 0x000604 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 1 class 0x000604 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 0 class 0x000200 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 0 class 0x000280 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0 Dest:1) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 14: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 13: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1 Dest:1) pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1400-0x14ff] pci_bus 0000:03: resource 1 [io 0x1000-0x10ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) IOAPIC[0]: Set routing entry (2-23 -> 0x49 -> IRQ 23 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:1) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1338321895.378:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X Linux agpgart interface v0.103 ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (67 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. IOAPIC[0]: Set routing entry (2-19 -> 0x71 -> IRQ 19 Mode:1 Active:1 Dest:1) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1 Dest:1) ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP cubic registered
printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0001 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000002000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000002000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000831 ... APIC ICR2: 01000000 ... APIC LVTT: 000000ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00003017 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9
number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 17 ....... : PRQ implemented: 1 ....... : IO APIC version: 21 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 01 0 0 0 0 0 1 1 30 01 01 0 0 0 0 0 1 1 31 02 01 1 0 0 0 0 0 0 32 03 01 0 0 0 0 0 1 1 33 04 01 0 0 0 0 0 1 1 34 05 01 0 0 0 0 0 1 1 35 06 01 0 0 0 0 0 1 1 36 07 01 0 0 0 0 0 1 1 37 08 01 0 0 0 0 0 1 1 38 09 01 0 1 0 1 0 1 1 39 0a 01 0 0 0 0 0 1 1 3A 0b 01 0 0 0 0 0 1 1 3B 0c 01 0 0 0 0 0 1 1 3C 0d 01 0 0 0 0 0 1 1 3D 0e 01 0 0 0 0 0 1 1 3E 0f 01 0 0 0 0 0 1 1 3F 10 01 0 1 0 1 0 1 1 79 11 01 1 1 0 1 0 1 1 51 12 00 1 0 0 0 0 0 0 00 13 01 1 1 0 1 0 1 1 71 14 01 1 1 0 1 0 1 1 41 15 00 1 0 0 0 0 0 0 00 16 01 0 0 0 0 0 1 1 29 17 01 1 1 0 1 0 1 1 49 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 428k freed NET: Registered protocol family 1 udevd[801]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 tg3.c:v3.122 (December 7, 2011) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 IOAPIC[0]: Set routing entry (2-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:1) ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 cfg80211: Calling CRDA to update world regulatory domain hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 b43-phy0: Broadcom 4311 WLAN found (core revision 13) ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Broadcom 43xx driver loaded [ Features: P ] usb 3-1: new low-speed USB device number 2 using ohci_hcd snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 2-2: new full-speed USB device number 2 using ohci_hcd hda-codec: No codec parser is available Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb usb 4-1: new full-speed USB device number 2 using ohci_hcd EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: moving STA 00:21:91:82:3c:30 to state 1 wlan0: moving STA 00:21:91:82:3c:30 to state 2 wlan0: moving STA 00:21:91:82:3c:30 to state 3 EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1
> - booting 3.4 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.7.0 (Gentoo 4.7.0 p1.0, pie-0.5.3) ) #1 SMP PREEMPT Wed May 30 02:32:19 OMST 2012 Command line: root=/dev/sda3 apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs mapped IOAPIC to ffffffffff5fa000 (fec00000) nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71936 r8192 d22272 u1048576 pcpu-alloc: s71936 r8192 d22272 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853624k/5242880k available (4315k kernel code, 1180420k absent, 208836k reserved, 1942k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.683 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.36 BogoMIPS (lpj=2190683) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246683 ... PM-Timer delta = 357900 ... PM-Timer result ok ..... delta 1246683 ..... mult: 53552767 ..... calibration result: 199469 ..... CPU clock speed is 2194.0160 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.36 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0 Dest:1) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1 Dest:1) pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) IOAPIC[0]: Set routing entry (2-23 -> 0x49 -> IRQ 23 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:1) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1338322052.381:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (62 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. IOAPIC[0]: Set routing entry (2-19 -> 0x71 -> IRQ 19 Mode:1 Active:1 Dest:1) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1 Dest:1) ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered
printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0000 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000002000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000010000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000831 ... APIC ICR2: 01000000 ... APIC LVTT: 000000ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00002d9e ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9
number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 17 ....... : PRQ implemented: 1 ....... : IO APIC version: 21 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 01 0 0 0 0 0 1 1 30 01 01 0 0 0 0 0 1 1 31 02 01 1 0 0 0 0 0 0 32 03 01 0 0 0 0 0 1 1 33 04 01 0 0 0 0 0 1 1 34 05 01 0 0 0 0 0 1 1 35 06 01 0 0 0 0 0 1 1 36 07 01 0 0 0 0 0 1 1 37 08 01 0 0 0 0 0 1 1 38 09 01 0 1 0 1 0 1 1 39 0a 01 0 0 0 0 0 1 1 3A 0b 01 0 0 0 0 0 1 1 3B 0c 01 0 0 0 0 0 1 1 3C 0d 01 0 0 0 0 0 1 1 3D 0e 01 0 0 0 0 0 1 1 3E 0f 01 0 0 0 0 0 1 1 3F 10 01 0 1 0 1 0 1 1 79 11 01 1 1 0 1 0 1 1 51 12 00 1 0 0 0 0 0 0 00 13 01 1 1 0 1 0 1 1 71 14 01 1 1 0 1 0 1 1 41 15 00 1 0 0 0 0 0 0 00 16 01 0 0 0 0 0 1 1 29 17 01 1 1 0 1 0 1 1 49 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[805]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 IOAPIC[0]: Set routing entry (2-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:1) ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 tg3.c:v3.123 (March 21, 2012) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 b43-phy0: Broadcom 4311 WLAN found (core revision 13) sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 Broadcom 43xx driver loaded [ Features: P ] usb 4-1: new full-speed USB device number 2 using ohci_hcd hda-codec: No codec parser is available ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 1-2: new full-speed USB device number 2 using ohci_hcd usb 3-1: new low-speed USB device number 2 using ohci_hcd input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |