lkml.org 
[lkml]   [2012]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 1/7] mmc: dw_mmc: lookup for optional biu and ciu clocks
    From
    On Wed, May 2, 2012 at 6:07 AM, Thomas Abraham
    <thomas.abraham@linaro.org> wrote:
    > Some platforms allow for clock gating and control of bus interface unit clock
    > and card interface unit clock. Add support for clock lookup of optional biu
    > and ciu clocks for clock gating and clock speed determination.
    >
    > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
    > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
    > ---
    >  drivers/mmc/host/dw_mmc.c  |   35 +++++++++++++++++++++++++++++++----
    >  include/linux/mmc/dw_mmc.h |    4 ++++
    >  2 files changed, 35 insertions(+), 4 deletions(-)
    >
    > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
    > index 1532357..036846f 100644
    > --- a/drivers/mmc/host/dw_mmc.c
    > +++ b/drivers/mmc/host/dw_mmc.c
    > @@ -1938,19 +1938,35 @@ int dw_mci_probe(struct dw_mci *host)
    >                return -ENODEV;
    >        }
    >
    > -       if (!host->pdata->bus_hz) {
    > +       host->biu_clk = clk_get(&host->dev, "biu");
    > +       if (IS_ERR(host->biu_clk))
    > +               dev_info(&host->dev, "biu clock not available\n");
    > +       else
    > +               clk_enable(host->biu_clk);
    > +
    > +       host->ciu_clk = clk_get(&host->dev, "ciu");
    > +       if (IS_ERR(host->ciu_clk))
    > +               dev_info(&host->dev, "ciu clock not available\n");

    Should these printks be at debug level? I'm not 100% sure either way
    but it could be a little noisy on systems that do not use these
    clocks.

    > +       else
    > +               clk_enable(host->ciu_clk);
    > +
    > +       if (IS_ERR(host->ciu_clk))
    > +               host->bus_hz = host->pdata->bus_hz;
    > +       else
    > +               host->bus_hz = clk_get_rate(host->ciu_clk);
    > +
    > +       if (!host->bus_hz) {
    >                dev_err(&host->dev,
    >                        "Platform data must supply bus speed\n");
    > -               return -ENODEV;
    > +               ret = -ENODEV;
    > +               goto err_clk;
    >        }
    >
    > -       host->bus_hz = host->pdata->bus_hz;
    >        host->quirks = host->pdata->quirks;
    >
    >        spin_lock_init(&host->lock);
    >        INIT_LIST_HEAD(&host->queue);
    >
    > -
    >        host->dma_ops = host->pdata->dma_ops;
    >        dw_mci_init_dma(host);
    >
    > @@ -2095,6 +2111,13 @@ err_dmaunmap:
    >                regulator_disable(host->vmmc);
    >                regulator_put(host->vmmc);
    >        }
    > +       kfree(host);
    > +
    > +err_clk:
    > +       clk_disable(host->ciu_clk);
    > +       clk_disable(host->biu_clk);
    > +       clk_put(host->ciu_clk);
    > +       clk_put(host->biu_clk);

    Are these calls safe, or do we need to check IS_ERR as above?

    >        return ret;
    >  }
    >  EXPORT_SYMBOL(dw_mci_probe);
    > @@ -2128,6 +2151,10 @@ void dw_mci_remove(struct dw_mci *host)
    >                regulator_put(host->vmmc);
    >        }
    >
    > +       clk_disable(host->ciu_clk);
    > +       clk_disable(host->biu_clk);
    > +       clk_put(host->ciu_clk);
    > +       clk_put(host->biu_clk);

    Likewise.

    >  }
    >  EXPORT_SYMBOL(dw_mci_remove);
    >
    > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
    > index 7a7ebd3..fa9a139 100644
    > --- a/include/linux/mmc/dw_mmc.h
    > +++ b/include/linux/mmc/dw_mmc.h
    > @@ -78,6 +78,8 @@ struct mmc_data;
    >  * @data_offset: Set the offset of DATA register according to VERID.
    >  * @dev: Device associated with the MMC controller.
    >  * @pdata: Platform data associated with the MMC controller.
    > + * @biu_clk: Pointer to bus interface unit clock instance.
    > + * @ciu_clk: Pointer to card interface unit clock instance.
    >  * @slot: Slots sharing this MMC controller.
    >  * @fifo_depth: depth of FIFO.
    >  * @data_shift: log2 of FIFO item size.
    > @@ -158,6 +160,8 @@ struct dw_mci {
    >        u16                     data_offset;
    >        struct device           dev;
    >        struct dw_mci_board     *pdata;
    > +       struct clk              *biu_clk;
    > +       struct clk              *ciu_clk;
    >        struct dw_mci_slot      *slot[MAX_MCI_SLOTS];
    >
    >        /* FIFO push and pull */
    > --
    > 1.7.5.4
    >
    > --
    > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at  http://vger.kernel.org/majordomo-info.html
    > Please read the FAQ at  http://www.tux.org/lkml/
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2012-05-02 12:01    [W:4.278 / U:0.564 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site