lkml.org 
[lkml]   [2012]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH 1/1] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
Hi Laurent,

Thanks for your review.

> -----Original Message-----
> From: Laurent Pinchart [mailto:laurent.pinchart@ideasonboard.com]
> Sent: Friday, May 18, 2012 4:21 AM
> To: Bhupesh SHARMA
> Cc: linux-usb@vger.kernel.org; balbi@ti.com; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH 1/1] usb: gadget/uvc: Add support for
> 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
>
> Hi Bhupesh,
>
> Thank you for the patch.
>
> On Monday 07 May 2012 12:42:37 Bhupesh Sharma wrote:
> > This patch adds the support in UVC webcam gadget design for providing
> > USB_GADGET_DELAYED_STATUS in response to a set_interface(alt setting
> 1)
> > command issue by the Host.
> >
> > The current UVC webcam gadget design generates a STREAMON event
> > corresponding to a set_interface(alt setting 1) command from the
> Host.
> > This STREAMON event will eventually be routed to a real V4L2 device.
> >
> > To start video streaming, it may be required to perform some register
> writes
> > to a camera sensor device over slow external busses like I2C or SPI.
> So, it
> > makes sense to ensure that we delay the STATUS stage of the
> > set_interface(alt setting 1) command.
> >
> > Otherwise, a lot of ISOC IN tokens sent by the Host will be replied
> to by
> > zero-length packets by the webcam device. On certain Hosts this may
> even
> > lead to ISOC URBs been cancelled from the Host side.
>
> Very good point.
>
> > So, as soon as we finish doing all the "streaming" related stuff on
> the real
> > V4L2 device, we call a STREAMON ioctl on the UVC side and from here
> we call
> > the 'usb_composite_setup_continue' function to complete the status
> stage of
> > the set_interface(alt setting 1) command.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
> > ---
> > drivers/usb/gadget/f_uvc.c | 12 +++++++++++-
> > drivers/usb/gadget/uvc.h | 4 ++++
> > drivers/usb/gadget/uvc_v4l2.c | 27 +++++++++++++++++++++++++--
> > 3 files changed, 40 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
> > index d2569b2..6f084e3 100644
> > --- a/drivers/usb/gadget/f_uvc.c
> > +++ b/drivers/usb/gadget/f_uvc.c
> > @@ -209,6 +209,14 @@ uvc_function_get_alt(struct usb_function *f,
> unsigned
> > interface) return uvc->state == UVC_STATE_STREAMING ? 1 : 0;
> > }
> >
> > +void
> > +uvc_process_setup_continue(struct uvc_device *uvc)
>
> No need for a line split, this won't exceed the 80 columns limit.

I just wanted to be in sync with existing function definition in UVC gadget.
But I will change this :)

> Could you please rename the function to uvc_function_setup_continue to
> be
> coherent with the other non-static functions in this file (and, while
> you're
> at it, move it right above uvc_function_get_alt) ?

Ok.

> > +{
> > + struct usb_composite_dev *cdev = uvc->func.config->cdev;
> > +
> > + usb_composite_setup_continue(cdev);
> > +}
> > +
> > static int
> > uvc_function_set_alt(struct usb_function *f, unsigned interface,
> unsigned
> > alt) {
> > @@ -271,7 +279,9 @@ uvc_function_set_alt(struct usb_function *f,
> unsigned
> > interface, unsigned alt) v4l2_event_queue(uvc->vdev, &v4l2_event);
> >
> > uvc->state = UVC_STATE_STREAMING;
> > - break;
> > + uvc->vdev_is_streaming = false;
>
> Do you think you could combine the state and vdev_is_streaming fields ?
> Maybe
> adding a UVC_STATE_PRE_STREAMING state would be enough, you could set
> the
> state to that value here, and then set it to UVC_STATE_STREAMING in the
> STREAMON ioctl handler (I would actually prefer doing that in the
> uvc_video_enable function).
>
> If you think it makes sense, could you please try it ?

Seems fine to me. I will give it a try and update my results soon.

>
> > +
> > + return USB_GADGET_DELAYED_STATUS;
>
> Could you please move the return 0 at the end of this function to the
> case 0
> above ? Each case will then have its return statement.

Ok.

> > default:
> > return -EINVAL;
> > diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
> > index bc78c60..56ac883 100644
> > --- a/drivers/usb/gadget/uvc.h
> > +++ b/drivers/usb/gadget/uvc.h
> > @@ -168,6 +168,9 @@ struct uvc_device
> > /* Events */
> > unsigned int event_length;
> > unsigned int event_setup_out : 1;
> > +
> > + /* flags */
> > + bool vdev_is_streaming;
> > };
> >
> > static inline struct uvc_device *to_uvc(struct usb_function *f)
> > @@ -188,6 +191,7 @@ struct uvc_file_handle
> > * Functions
> > */
> >
> > +extern void uvc_process_setup_continue(struct uvc_device *uvc);
> > extern void uvc_endpoint_stream(struct uvc_device *dev);
> >
> > extern void uvc_function_connect(struct uvc_device *uvc);
> > diff --git a/drivers/usb/gadget/uvc_v4l2.c
> b/drivers/usb/gadget/uvc_v4l2.c
> > index f761bcb..379d8ac 100644
> > --- a/drivers/usb/gadget/uvc_v4l2.c
> > +++ b/drivers/usb/gadget/uvc_v4l2.c
> > @@ -242,7 +242,18 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned
> int cmd,
> > void *arg) if ((ret = uvc_queue_buffer(&video->queue, arg)) < 0)
> > return ret;
> >
> > - return uvc_video_pump(video);
> > + /*
> > + * for the very first QBUF calls (until STREAMON is
> > + * called) we just need to queue the buffers and start
> > + * pumping the data to USB side only after STREAMON has
> > + * been called which is handled by the STREAMON case
> > + * below. For QBUF calls after STREAMON, we need to pump
> > + * the data to the USB side here itself.
> > + */
> > + if (uvc->vdev_is_streaming)
> > + return uvc_video_pump(video);
> > +
> > + return 0;
> >
> > case VIDIOC_DQBUF:
> > return uvc_dequeue_buffer(&video->queue, arg,
> > @@ -255,7 +266,19 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned
> int cmd,
> > void *arg) if (*type != video->queue.type)
> > return -EINVAL;
> >
> > - return uvc_video_enable(video, 1);
> > + ret = uvc_video_enable(video, 1);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /*
> > + * since the real video device has now started streaming
> > + * its safe now to complete the status phase of the
> > + * set_interface (alt setting 1)
> > + */
> > + uvc_process_setup_continue(uvc);
> > + uvc->vdev_is_streaming = true;
>
> Could you please move this to uvc_video_enable() ?

Ok.

> > +
> > + return 0;
> > }
> >
> > case VIDIOC_STREAMOFF:
>

Regards,
Bhupesh


\
 
 \ /
  Last update: 2012-05-18 07:21    [W:0.070 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site