lkml.org 
[lkml]   [2012]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH EDAC v26 41/66] edac: use Documentation-nano format for some data structs
Date
No functional changes. Just comment improvements.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
include/linux/edac.h | 82 ++++++++++++++++++++++++++++++++++++--------------
1 files changed, 59 insertions(+), 23 deletions(-)

diff --git a/include/linux/edac.h b/include/linux/edac.h
index ec1b527..4e32e8d 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -49,7 +49,19 @@ static inline void opstate_init(void)
#define EDAC_MC_LABEL_LEN 31
#define MC_PROC_NAME_MAX_LEN 7

-/* memory devices */
+/**
+ * enum dev_type - describe the type of memory DRAM chips used at the stick
+ * @DEV_UNKNOWN: Can't be determined, or MC doesn't support detect it
+ * @DEV_X1: 1 bit for data
+ * @DEV_X2: 2 bits for data
+ * @DEV_X4: 4 bits for data
+ * @DEV_X8: 8 bits for data
+ * @DEV_X16: 16 bits for data
+ * @DEV_X32: 32 bits for data
+ * @DEV_X64: 64 bits for data
+ *
+ * Typical values are x4 and x8.
+ */
enum dev_type {
DEV_UNKNOWN = 0,
DEV_X1,
@@ -167,18 +179,30 @@ enum mem_type {
#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)

-/* chipset Error Detection and Correction capabilities and mode */
+/**
+ * enum edac-type - Error Detection and Correction capabilities and mode
+ * @EDAC_UNKNOWN: Unknown if ECC is available
+ * @EDAC_NONE: Doesn't support ECC
+ * @EDAC_RESERVED: Reserved ECC type
+ * @EDAC_PARITY: Detects parity errors
+ * @EDAC_EC: Error Checking - no correction
+ * @EDAC_SECDED: Single bit error correction, Double detection
+ * @EDAC_S2ECD2ED: Chipkill x2 devices - do these exist?
+ * @EDAC_S4ECD4ED: Chipkill x4 devices
+ * @EDAC_S8ECD8ED: Chipkill x8 devices
+ * @EDAC_S16ECD16ED: Chipkill x16 devices
+ */
enum edac_type {
- EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
- EDAC_NONE, /* Doesn't support ECC */
- EDAC_RESERVED, /* Reserved ECC type */
- EDAC_PARITY, /* Detects parity errors */
- EDAC_EC, /* Error Checking - no correction */
- EDAC_SECDED, /* Single bit error correction, Double detection */
- EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
- EDAC_S4ECD4ED, /* Chipkill x4 devices */
- EDAC_S8ECD8ED, /* Chipkill x8 devices */
- EDAC_S16ECD16ED, /* Chipkill x16 devices */
+ EDAC_UNKNOWN = 0,
+ EDAC_NONE,
+ EDAC_RESERVED,
+ EDAC_PARITY,
+ EDAC_EC,
+ EDAC_SECDED,
+ EDAC_S2ECD2ED,
+ EDAC_S4ECD4ED,
+ EDAC_S8ECD8ED,
+ EDAC_S16ECD16ED,
};

#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
@@ -191,18 +215,30 @@ enum edac_type {
#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)

-/* scrubbing capabilities */
+/**
+ * enum scrub_type - scrubbing capabilities
+ * @SCRUB_UNKNOWN Unknown if scrubber is available
+ * @SCRUB_NONE: No scrubber
+ * @SCRUB_SW_PROG: SW progressive (sequential) scrubbing
+ * @SCRUB_SW_SRC: Software scrub only errors
+ * @SCRUB_SW_PROG_SRC: Progressive software scrub from an error
+ * @SCRUB_SW_TUNABLE: Software scrub frequency is tunable
+ * @SCRUB_HW_PROG: HW progressive (sequential) scrubbing
+ * @SCRUB_HW_SRC: Hardware scrub only errors
+ * @SCRUB_HW_PROG_SRC: Progressive hardware scrub from an error
+ * SCRUB_HW_TUNABLE: Hardware scrub frequency is tunable
+ */
enum scrub_type {
- SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
- SCRUB_NONE, /* No scrubber */
- SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
- SCRUB_SW_SRC, /* Software scrub only errors */
- SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
- SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
- SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
- SCRUB_HW_SRC, /* Hardware scrub only errors */
- SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
- SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
+ SCRUB_UNKNOWN = 0,
+ SCRUB_NONE,
+ SCRUB_SW_PROG,
+ SCRUB_SW_SRC,
+ SCRUB_SW_PROG_SRC,
+ SCRUB_SW_TUNABLE,
+ SCRUB_HW_PROG,
+ SCRUB_HW_SRC,
+ SCRUB_HW_PROG_SRC,
+ SCRUB_HW_TUNABLE
};

#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
--
1.7.8


\
 
 \ /
  Last update: 2012-05-18 20:41    [W:0.419 / U:1.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site