lkml.org 
[lkml]   [2012]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ACPI: evaluate _PS3 when entering D3 Cold
Date
On Monday, April 09, 2012, Huang Ying wrote:
> On Mon, 2012-04-09 at 01:41 +0200, Rafael J. Wysocki wrote:
> > > >
> > > > If _PS3 is present, then _PR3 may or may not be present. In the latter case
> > > > we can only execute _PS3 in the hope it does the right thing, but as long
> > > > as we restore the device's configuration registers while resuming it (which is
> > > > done by all of our PCI device resume callback routines as far as I can say),
> > > > the only possible difference is the resume latency (which may be greater if
> > > > power is removed from the device entirely).
> > >
> > > Another difference between D3Hot and D3Cold for PCI devices is config
> > > space availability. That is, in D3Hot, you can access D3Hot, while in
> > > D3Cold you can not do that. For example, PME poll logic need to be
> > > disabled if we put device into D3Cold.
> >
> > We're not talking about PCI here. PCI D3hot/D3cold is actually well defined,
> > while the ACPI "couterparts" aren't. And BTW I know the properties of the PCI
> > power management states. :-)
>
> I see.
>
> > > > However, in that case we shouldn't
> > > > turn off the device's power resources after _PS3 has been executed (if we
> > > > turned them off, power would be removed from the device, which wouldn't be
> > > > what PCI wanted). So, to handle this particular case we need to pass
> > > > ACPI_STATE_D3_HOT to acpi_bus_set_power(), meaning "avoid going into D3_cold,
> > > > if possible".
> > > >
> > > > In both _PS3 and _PR3 are present, we should evaluate _PS3 and then turn off
> > > > the power resources listed as "off" by _PR3 (and turn on the power resoruces
> > > > listed by it as "on"), but we need to restore the configuration registers of
> > > > the device while resuming it. I think this is handled correctly without
> > > > modifications.
> > > >
> > > > If neither _PS3 nor _PR3 is present, we shouldn't turn off the device's
> > > > power resources, because PCI doesn't want power to be removed from the device.
> > >
> > > For PCI device plugged into system via slot (not integrated into PCH
> > > or motherboard), there is no ACPI handle associate with it, so that
> > > there are neither _PS3 nor _PR3 presented. But it is still possible
> > > to turn off the device power via the associated PCIe port, which has
> > > _PS3 and/or _PR3 presented. I think that situation is reasonable too.
> >
> > Again, this hasn't anything to do with ACPI.
> >
> > We're discussing standard interfaces exposed by ACPI. That is, if I say
> > "to turn of the device's power resources" I mean to call _OFF for all of the
> > power resources listed by _PR0 for that device. Nothing more or less than
> > that.
> >
> > > > In summary, if PCI wants the device to be put into PCI_D3hot and _PS3 is
> > > > present, we should evaluate _PS3. However, we shouldn't turn the device's
> > > > power resources off unless _PR3 is present, in which case we can turn off
> > > > the power resources listed by it as "off".
> > >
> > > How to turn the device's power resources off without _PR3? It may be
> > > possible via PCIe port as I said above. Do you mean that? Or
> > > something else?
> >
> > If _PR0 is present, it returns the list of power resources needed by the
> > device. If you turn them all off, the assumption is that power has been
> > removed from the device, so it is in D3(cold).
>
> So. If PCI wants the device to be put into PCI_D3hot and _PS3 is
> present. We should evaluate _PS3 AND set the pci_dev->current_state to
> PCI_D3cold?

No, I believe we should use the standard PCI PM interface to put the device
into PCI_D3hot and skip the execution of _PS3 (which is not what we do now,
but that's only because acpi_pci_set_power_state() doesn't distinguish
ACPI D3_hot from ACPI D3_cold).

If the standard PCI PM interface is not supported, the PCI_D3hot state is not
well defined for the device.

Thanks,
Rafael


\
 
 \ /
  Last update: 2012-04-09 23:23    [W:0.096 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site