lkml.org 
[lkml]   [2012]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH wireless-next] wireless: Remove unnecessary ; from while (0) macros
On 04/03/2012 04:46 PM, Joe Perches wrote:
> Semicolons are not necessary after macros that end in while (0).
> Remove them.
>
> Simplify the macros with tests of
> do { if (foo>size) memset1; else memset2;} while (0);
> to a single line memset(,,min_t(size_t, foo, size))
>
> Signed-off-by: Joe Perches<joe@perches.com>

ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> (rtlwifi part)

> ---
> drivers/net/wireless/ath/carl9170/cmd.h | 6 +++---
> drivers/net/wireless/brcm80211/brcmsmac/d11.h | 2 +-
> drivers/net/wireless/mwifiex/sdio.h | 8 ++++----
> drivers/net/wireless/rtlwifi/rtl8192ce/trx.h | 7 +------
> drivers/net/wireless/rtlwifi/rtl8192de/trx.h | 8 ++------
> drivers/net/wireless/rtlwifi/rtl8192se/def.h | 7 +------
> drivers/net/wireless/rtlwifi/rtl8192se/fw.h | 6 +++---
> 7 files changed, 15 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/carl9170/cmd.h b/drivers/net/wireless/ath/carl9170/cmd.h
> index 885c427..65919c9 100644
> --- a/drivers/net/wireless/ath/carl9170/cmd.h
> +++ b/drivers/net/wireless/ath/carl9170/cmd.h
> @@ -114,7 +114,7 @@ __regwrite_out : \
>
> #define carl9170_regwrite_result() \
> __err; \
> -} while (0);
> +} while (0)
>
>
> #define carl9170_async_regwrite_get_buf() \
> @@ -126,7 +126,7 @@ do { \
> __err = -ENOMEM; \
> goto __async_regwrite_out; \
> } \
> -} while (0);
> +} while (0)
>
> #define carl9170_async_regwrite_begin(carl) \
> do { \
> @@ -169,6 +169,6 @@ __async_regwrite_out: \
>
> #define carl9170_async_regwrite_result() \
> __err; \
> -} while (0);
> +} while (0)
>
> #endif /* __CMD_H */
> diff --git a/drivers/net/wireless/brcm80211/brcmsmac/d11.h b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
> index 1948cb2..3f659e0 100644
> --- a/drivers/net/wireless/brcm80211/brcmsmac/d11.h
> +++ b/drivers/net/wireless/brcm80211/brcmsmac/d11.h
> @@ -733,7 +733,7 @@ struct cck_phy_hdr {
> do { \
> plcp[1] = len& 0xff; \
> plcp[2] = ((len>> 8)& 0xff); \
> - } while (0);
> + } while (0)
>
> #define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
> #define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3]&= ~MIMO_PLCP_AMPDU)
> diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
> index a3fb322..0ead152 100644
> --- a/drivers/net/wireless/mwifiex/sdio.h
> +++ b/drivers/net/wireless/mwifiex/sdio.h
> @@ -193,7 +193,7 @@
> a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
> a->mp_end_port))); \
> a->mpa_tx.pkt_cnt++; \
> -} while (0);
> +} while (0)
>
> /* SDIO Tx aggregation limit ? */
> #define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \
> @@ -211,7 +211,7 @@
> a->mpa_tx.buf_len = 0; \
> a->mpa_tx.ports = 0; \
> a->mpa_tx.start_port = 0; \
> -} while (0);
> +} while (0)
>
> /* SDIO Rx aggregation limit ? */
> #define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \
> @@ -242,7 +242,7 @@
> a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \
> a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \
> a->mpa_rx.pkt_cnt++; \
> -} while (0);
> +} while (0)
>
> /* Reset SDIO Rx aggregation buffer parameters */
> #define MP_RX_AGGR_BUF_RESET(a) do { \
> @@ -250,7 +250,7 @@
> a->mpa_rx.buf_len = 0; \
> a->mpa_rx.ports = 0; \
> a->mpa_rx.start_port = 0; \
> -} while (0);
> +} while (0)
>
>
> /* data structure for SDIO MPA TX */
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
> index efb9ab2..c4adb97 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
> @@ -530,12 +530,7 @@
> SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
>
> #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
> -do { \
> - if (_size> TX_DESC_NEXT_DESC_OFFSET) \
> - memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
> - else \
> - memset(__pdesc, 0, _size); \
> -} while (0);
> + memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
>
> struct rx_fwinfo_92c {
> u8 gain_trsw[4];
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
> index 0dc736c..057a524 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h
> @@ -530,12 +530,8 @@
> SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
>
> #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
> -do { \
> - if (_size> TX_DESC_NEXT_DESC_OFFSET) \
> - memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
> - else \
> - memset((void *)__pdesc, 0, _size); \
> -} while (0);
> + memset((void *)__pdesc, 0, \
> + min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
>
> /* For 92D early mode */
> #define SET_EARLYMODE_PKTNUM(__paddr, __value) \
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/def.h b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
> index d1b0a1e..20afec6 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/def.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/def.h
> @@ -252,12 +252,7 @@
> * the desc is cleared. */
> #define TX_DESC_NEXT_DESC_OFFSET 36
> #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size) \
> -do { \
> - if (_size> TX_DESC_NEXT_DESC_OFFSET) \
> - memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET); \
> - else \
> - memset(__pdesc, 0, _size); \
> -} while (0);
> + memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
>
> /* Rx Desc */
> #define RX_STATUS_DESC_SIZE 24
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
> index b4afff6..d53f433 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.h
> @@ -345,7 +345,7 @@ enum fw_h2c_cmd {
> do { \
> udelay(1000); \
> rtlpriv->rtlhal.fwcmd_iomap&= (~_Bit); \
> - } while (0);
> + } while (0)
>
> #define FW_CMD_IO_UPDATE(rtlpriv, _val) \
> rtlpriv->rtlhal.fwcmd_iomap = _val;
> @@ -354,13 +354,13 @@ enum fw_h2c_cmd {
> do { \
> rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val); \
> FW_CMD_IO_UPDATE(rtlpriv, _val); \
> - } while (0);
> + } while (0)
>
> #define FW_CMD_PARA_SET(rtlpriv, _val) \
> do { \
> rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val); \
> rtlpriv->rtlhal.fwcmd_ioparam = _val; \
> - } while (0);
> + } while (0)
>
> #define FW_CMD_IO_QUERY(rtlpriv) \
> (u16)(rtlpriv->rtlhal.fwcmd_iomap)
>
>
>



\
 
 \ /
  Last update: 2012-04-04 00:45    [from the cache]
©2003-2011 Jasper Spaans