lkml.org 
[lkml]   [2012]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] ARM: omap2+: set IRQCHIP_SKIP_SET_WAKE for INTC interrupts.
On Thu, 26 Apr 2012 13:39:07 -0700 Kevin Hilman <khilman@ti.com> wrote:

> NeilBrown <neilb@suse.de> writes:
>
> > All interrupts can wake-from-sleep (I think) so it should be
> > permissible to call enable_irq_wake(). Setting this flag allows that.
> >
> > It is needed because without this, an interrupt which is delivered
> > during late suspend will get ignored but will not cause suspend to
> > abort.
> > If enable_irq_wake() is called and succeeds, check_wakuep_irqs()
> > will abort the suspend if the interrupt has fired.
> >
> > Signed-off-by: NeilBrown <neilb@suse.de>
>
> The name of this flag and the effect of setting it are somewhat
> confusing (e.g. why does skipping set_wake suddenly make wakeups work.)
> So I tried to make it clearer with a reworking of the changelog (below.)
>
> If I understood this correctly, and if you're OK with the updated
> changelog, I'll queue this up for v3.5.
>

I'm very OK with your updated changelog - thanks. Filling in various bits
that I didn't know and clarifies the rest :-)

Thanks,
NeilBrown



> Thanks,
>
> Kevin
>
> >From 644742ddae59731bc10aacde94645d7c49ca5ecd Mon Sep 17 00:00:00 2001
> From: NeilBrown <neilb@suse.de>
> Date: Wed, 25 Apr 2012 13:05:24 +1000
> Subject: [PATCH] ARM: omap2+: set IRQCHIP_SKIP_SET_WAKE for INTC interrupts.
>
> Without an ->irq_set_wake() method in an irq_chip, calls to
> enable_irq_wake() will fail. This also causes these interrupts to not
> be able to abort suspend (via check_wakeup_irqs() in late suspend.)
>
> Currently, we don't implement ->irq_set_wake() for INTC interrupts
> because they default to be wakeup enabled by setting the GRPSEL bits
> in PM init. Even though there is no ->irq_set_wake(), we want
> enable_irq_wake() to succeed so these interrupts can abort suspend
> when necessary.
>
> To fix, set IRQCHIP_SKIP_SET_WAKE flag for all the INTC
> interrupts which avoids trying to check irq_chip->irq_set_wake()
> and failing when it doesn't exist.
>
> Longer term, we need to implement ->irq_set_wake() for the INTC
> which can manage the appropriate GRPSEL bits.
>
> Signed-off-by: NeilBrown <neilb@suse.de>
> [khilman@ti.com: rework changelog]
> Signed-off-by: Kevin Hilman <khilman@ti.com>
> ---
> arch/arm/mach-omap2/irq.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
> index 65f0d257..b0790a9 100644
> --- a/arch/arm/mach-omap2/irq.c
> +++ b/arch/arm/mach-omap2/irq.c
> @@ -148,6 +148,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
> ct->chip.irq_ack = omap_mask_ack_irq;
> ct->chip.irq_mask = irq_gc_mask_disable_reg;
> ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
> + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
>
> ct->regs.ack = INTC_CONTROL;
> ct->regs.enable = INTC_MIR_CLEAR0;

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-04-27 06:21    [W:0.687 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site