lkml.org 
[lkml]   [2012]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] ux500/Nomadik GPIO and pins update
Date
From: Linus Walleij <linus.walleij@linaro.org>

This is basically an update and sync of Nomadik and ux500 GPIO
development.

If you wonder why I introduce a deviant pin configuration path
not using the pin config subsystem it is because I want to build
atop of this work which I know works. It will be switched over
to pinctrl in later patch sets on top of this.

This is *almost* orthogonal to other ux500 development, but
there *might* be conflicts with Lee Jones' Device Tree work,
so I will try to create a separate orthogonal ux500 GPIO branch
for this stuff.

Linus Walleij (4):
gpio/nomadik: use typesafe __io_address()
plat-nomadik: new sleep mode pincfg macros
ARM: ux500: remove a bunch of internal pull-ups
ARM: ux500: update pin handling

Rabin Vincent (5):
gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
gpio/nomadik: cache [rf]w?imsc
gpio/nomadik: fix spurious interrupts with SKE
gpio/nomadik: support low EMI mode
ARM: ux500: implement pin API

arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/board-mop500-pins.c | 394 ++++++++++++++++-----
arch/arm/mach-ux500/board-mop500.h | 4 +
arch/arm/mach-ux500/pins-db8500.h | 72 ++--
arch/arm/mach-ux500/pins.c | 88 +++++
arch/arm/mach-ux500/pins.h | 46 +++
arch/arm/plat-nomadik/include/plat/gpio-nomadik.h | 1 +
arch/arm/plat-nomadik/include/plat/pincfg.h | 19 +
drivers/gpio/gpio-nomadik.c | 129 +++++--
9 files changed, 591 insertions(+), 164 deletions(-)
create mode 100644 arch/arm/mach-ux500/pins.c
create mode 100644 arch/arm/mach-ux500/pins.h

--
1.7.9.2



\
 
 \ /
  Last update: 2012-04-23 11:21    [W:0.040 / U:8.636 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site