lkml.org 
[lkml]   [2012]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: cache-l2x0.c: save aux ctrl for resume in case that l2x0 is enabled before init
Date
If l2x0 controller has been enabled when calling l2x0_init, the aux ctrl
register will not be saved in l2x0_saved_regs. Therefore we can not use
l2x0_saved_regs.aux_ctrl for resume later. This patch fixed the problem
by saving aux ctrl in l2x0_saved_regs just after it's being read from
the register.

Signed-off-by: Yilu Mao <ylmao@marvell.com>
---
arch/arm/mm/cache-l2x0.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 8936595..3b6428b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -362,6 +362,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
l2x0_cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);

+ /* In case l2x controller is enabled, the aux ctrl register
+ * can't be set. So the original value should be stored in
+ * the l2x0_saved_regs for restoring when resume. */
+ l2x0_saved_regs.aux_ctrl = aux;
+
aux &= aux_mask;
aux |= aux_val;

--
1.7.0.4


\
 
 \ /
  Last update: 2012-04-23 09:47    [W:0.079 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site