lkml.org 
[lkml]   [2012]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 5/9] KVM: MMU: introduce SPTE_WRITE_PROTECT bit
On 04/21/2012 12:38 PM, Marcelo Tosatti wrote:

> On Sat, Apr 21, 2012 at 11:47:46AM +0800, Xiao Guangrong wrote:
>> On 04/21/2012 05:52 AM, Marcelo Tosatti wrote:
>>
>>> On Fri, Apr 20, 2012 at 04:19:17PM +0800, Xiao Guangrong wrote:
>>>> If this bit is set, it means the W bit of the spte is cleared due
>>>> to shadow page table protection
>>>>
>>>> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
>>>> ---
>>>> arch/x86/kvm/mmu.c | 56 ++++++++++++++++++++++++++++++++++-----------------
>>>> 1 files changed, 37 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
>>>> index dd984b6..eb02fc4 100644
>>>> --- a/arch/x86/kvm/mmu.c
>>>> +++ b/arch/x86/kvm/mmu.c
>>>> @@ -147,6 +147,7 @@ module_param(dbg, bool, 0644);
>>>>
>>>> #define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
>>>> #define SPTE_ALLOW_WRITE (1ULL << (PT_FIRST_AVAIL_BITS_SHIFT + 1))
>>>> +#define SPTE_WRITE_PROTECT (1ULL << (PT_FIRST_AVAIL_BITS_SHIFT + 2))
>>>>
>>>> #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
>>>>
>>>> @@ -1042,36 +1043,51 @@ static void drop_spte(struct kvm *kvm, u64 *sptep)
>>>> rmap_remove(kvm, sptep);
>>>> }
>>>>
>>>> +static bool spte_wp_by_dirty_log(u64 spte)
>>>> +{
>>>> + WARN_ON(is_writable_pte(spte));
>>>> +
>>>> + return (spte & SPTE_ALLOW_WRITE) && !(spte & SPTE_WRITE_PROTECT);
>>>> +}
>>>
>>> Is the information accurate? Say:
>>>
>>> - dirty log write protect, set SPTE_ALLOW_WRITE, clear WRITABLE.
>>> - shadow gfn, rmap_write_protect finds page not WRITABLE.
>>> - spte points to shadow gfn, but SPTE_WRITE_PROTECT is not set.
>>
>>
>> It can not happen, rmap_write_protect will set SPTE_WRITE_PROTECT
>> even if the spte is not WRITABLE, please see:
>>
>> + if (page_table_protect && spte_wp_by_dirty_log(spte))
>> + goto reset_spte;
>> +
>> + return false;
>> +
>> +reset_spte:
>> rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
>> spte = spte & ~PT_WRITABLE_MASK;
>> + if (page_table_protect)
>> + spte |= SPTE_WRITE_PROTECT;
>> mmu_spte_update(sptep, spte);
>> -
>> return false;
>> }
>
> Right. What about sync path, fault path, prefault path, do they update
> SPTE_WRITE_PROTECT properly?
>


All of these case can call set_spte() to update the spte,

@@ -2346,6 +2363,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
ret = 1;
pte_access &= ~ACC_WRITE_MASK;
spte &= ~PT_WRITABLE_MASK;
+ spte |= SPTE_WRITE_PROTECT;

SPTE_WRITE_PROTECT bit is set if the page is write-protected.

>>> BTW,
>>>
>>> "introduce SPTE_ALLOW_WRITE bit
>>>
>>> This bit indicates whether the spte is allow to be writable that
>>> means the gpte of this spte is writable and the pfn pointed by
>>> this spte is writable on host"
>>>
>>> Other than the fact that each bit should have one meaning, how
>>> can this bit be accurate without write protection of the gpte?
>>>
>>
>> Above explanation can ensure the meaning of this bit is accurate?
>> Or it has another case? :)
>
> No, it is out of sync with guest pte.
>
>>> As soon as guest writes to gpte, information in bit is outdated.
>>>
>>
>>
>> The bit will be updated when spte is updated.
>>
>> When the guest write gpte, the spte is not updated immediately,
>> yes, the bit is outdated at that time, but it is ok since tlb is
>> not flushed.
>
> Page faults cause TLB flushes.
>
>>From Intel manual:
>
> "In addition to the instructions identified above, page faults
> invalidate entries in the TLBs and paging-structure caches. In
> particular, a page-fault exception resulting from an attempt to use
> a linear address will invalidate any TLB entries that are for a page
> number corresponding to that linear address and that are associated with
> the current PCID."
>


Yes, the fault tlb entries is removed _after_ page fault. On page fault
path, the spte is correctly updated (clear SPTE_ALLOW_WRITABLE bit),
and the fast page fault path is fail to update the spte (Since
SPTE_ALLOW_WRITABLE is not set or cmpxchg is fail.)

There is windows that is between guest write and shadow page page fault,
it this windows, fast page fault can make the spte to be writable, it is
ok, since the guest write instruction is not completed.

>> After tlb flush, the bit can be coincident with gpte.
>
> You must read the gpte before updating from ro->rw, unless you write
> protect gpte. IIRC you were doing that in previous patches?
>


Not need. Please see the below sequence:

gpte.W = 1
spte is the shadow page entry of gpte.
spte.W = 0


VCPU 0 VCPU 1
guest write gpte.W = 0
guest write memory through gpte
fast page fault:
cmpxchg spte + W

SPTE.SPTE_ALLOW_WRITE = 0 when
host emulate the write or sync shadow pages
(spte is zapped or read-only)

flush_tlb

return to guest
the guest write operation is completed.

It does not break anything.

Marcelo, i guess you missed "gpte to be written" and "access through gpte",
yes? A write operation changes the page which the pte points to, not change
the pte.



\
 
 \ /
  Last update: 2012-04-21 09:29    [W:0.136 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site