lkml.org 
[lkml]   [2012]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/17] hpsa: enable bus master bit after pci_enable_device
On Fri, Apr 20, 2012 at 12:41:50PM -0600, Khalid Aziz wrote:
> On Fri, 2012-04-20 at 10:06 -0500, Stephen M. Cameron wrote:
> > From: Stephen M. Cameron <scameron@beardog.cce.hp.com>
> >
> > pci_disable_device() disables the bus master bit and pci_enable_device does
> > not re-enable it. It needs to be enabled.
> >
> > Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
> > ---
> > drivers/scsi/hpsa.c | 6 ++++++
> > 1 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
> > index 5119ce6..363619d 100644
> > --- a/drivers/scsi/hpsa.c
> > +++ b/drivers/scsi/hpsa.c
> > @@ -3917,6 +3917,7 @@ static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h)
> > static int __devinit hpsa_pci_init(struct ctlr_info *h)
> > {
> > int prod_index, err;
> > + u16 command_register;
> >
> > prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
> > if (prod_index < 0)
> > @@ -3933,6 +3934,11 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
> > return err;
> > }
> >
> > + /* Enable bus mastering (pci_disable_device may disable this) */
> > + pci_read_config_word(h->pdev, PCI_COMMAND, &command_register);
> > + command_register |= PCI_COMMAND_MASTER;
> > + pci_write_config_word(h->pdev, PCI_COMMAND, command_register);
> > +
> > err = pci_request_regions(h->pdev, HPSA);
> > if (err) {
> > dev_err(&h->pdev->dev,
>
> Wouldn't it be better to use pci_set_master(h->pdev) to enable bus
> mastering?

Yes. Thanks.

-- steve



\
 
 \ /
  Last update: 2012-04-20 22:09    [W:0.465 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site