lkml.org 
[lkml]   [2012]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 60/69] TTY: 68328serial, propagate tty
Date
We need tty at some places, but info->tty might be NULL at those. Let
us propagate tty from callers where we know we have a valid tty. This
will make a switch to tty refcounting simpler.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/tty/serial/68328serial.c | 53 +++++++++++++++++++-------------------
1 file changed, 27 insertions(+), 26 deletions(-)

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index e3a1c55..fde573b 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -140,7 +140,7 @@ m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;

struct tty_driver *serial_driver;

-static void change_speed(struct m68k_serial *info);
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty);

/*
* Setup for console. Argument comes from the boot command line.
@@ -263,9 +263,9 @@ static void rs_start(struct tty_struct *tty)
local_irq_restore(flags);
}

-static void receive_chars(struct m68k_serial *info, unsigned short rx)
+static void receive_chars(struct m68k_serial *info, struct tty_struct *tty,
+ unsigned short rx)
{
- struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
unsigned char ch, flag;

@@ -317,7 +317,7 @@ clear_and_exit:
return;
}

-static void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];

@@ -328,7 +328,7 @@ static void transmit_chars(struct m68k_serial *info)
goto clear_and_return;
}

- if((info->xmit_cnt <= 0) || info->tty->stopped) {
+ if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
/* That's peculiar... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
@@ -356,6 +356,7 @@ clear_and_return:
irqreturn_t rs_interrupt(int irq, void *dev_id)
{
struct m68k_serial *info = dev_id;
+ struct tty_struct *tty = info->tty;
m68328_uart *uart;
unsigned short rx;
unsigned short tx;
@@ -366,15 +367,17 @@ irqreturn_t rs_interrupt(int irq, void *dev_id)
#ifdef USE_INTS
tx = uart->utx.w;

- if (rx & URX_DATA_READY) receive_chars(info, rx);
- if (tx & UTX_TX_AVAIL) transmit_chars(info);
+ if (rx & URX_DATA_READY)
+ receive_chars(info, tty, rx);
+ if (tx & UTX_TX_AVAIL)
+ transmit_chars(info, tty);
#else
- receive_chars(info, rx);
+ receive_chars(info, tty, rx);
#endif
return IRQ_HANDLED;
}

-static int startup(struct m68k_serial * info)
+static int startup(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
@@ -409,15 +412,15 @@ static int startup(struct m68k_serial * info)
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
#endif

- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (tty)
+ clear_bit(TTY_IO_ERROR, &tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;

/*
* and set the speed of the serial port
*/

- change_speed(info);
+ change_speed(info, tty);

info->tport.flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -428,7 +431,7 @@ static int startup(struct m68k_serial * info)
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void shutdown(struct m68k_serial * info)
+static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
@@ -444,8 +447,8 @@ static void shutdown(struct m68k_serial * info)
info->xmit_buf = 0;
}

- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (tty)
+ set_bit(TTY_IO_ERROR, &tty->flags);

info->tport.flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
@@ -503,7 +506,7 @@ struct {
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static void change_speed(struct m68k_serial *info)
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned short port;
@@ -511,9 +514,7 @@ static void change_speed(struct m68k_serial *info)
unsigned cflag;
int i;

- if (!info->tty || !info->tty->termios)
- return;
- cflag = info->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
if (!(port = info->port))
return;

@@ -832,7 +833,7 @@ static int get_serial_info(struct m68k_serial * info,
return 0;
}

-static int set_serial_info(struct m68k_serial * info,
+static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
struct serial_struct * new_info)
{
struct tty_port *port = &info->tport;
@@ -875,7 +876,7 @@ static int set_serial_info(struct m68k_serial * info,
port->closing_wait = new_serial.closing_wait;

check_and_exit:
- retval = startup(info);
+ retval = startup(info, tty);
return retval;
}

@@ -961,7 +962,7 @@ static int rs_ioctl(struct tty_struct *tty,
return get_serial_info(info,
(struct serial_struct *) arg);
case TIOCSSERIAL:
- return set_serial_info(info,
+ return set_serial_info(info, tty,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info(info, (unsigned int *) arg);
@@ -980,7 +981,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;

- change_speed(info);
+ change_speed(info, tty);

if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -1056,7 +1057,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
uart->ustcnt &= ~USTCNT_RXEN;
uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);

- shutdown(info);
+ shutdown(info, tty);
rs_flush_buffer(tty);

tty_ldisc_flush(tty);
@@ -1094,7 +1095,7 @@ void rs_hangup(struct tty_struct *tty)
return;

rs_flush_buffer(tty);
- shutdown(info);
+ shutdown(info, tty);
info->tport.count = 0;
info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = NULL;
@@ -1214,7 +1215,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
/*
* Start up serial port
*/
- retval = startup(info);
+ retval = startup(info, tty);
if (retval)
return retval;

--
1.7.9.2



\
 
 \ /
  Last update: 2012-04-02 14:11    [W:0.242 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site