lkml.org 
[lkml]   [2012]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 55/69] TTY: 68328serial, remove 68328serial.h
Date
All the needed stuff is moved to 68328serial.c now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/tty/serial/68328serial.c | 79 ++++++++++++++++++++++++++++++--
drivers/tty/serial/68328serial.h | 94 --------------------------------------
2 files changed, 76 insertions(+), 97 deletions(-)
delete mode 100644 drivers/tty/serial/68328serial.h

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index f0d5039..116d932 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -57,8 +57,6 @@
#endif /* CONFIG_M68VZ328 */
#endif /* CONFIG_M68EZ328 */

-#include "68328serial.h"
-
/* Turn off usage of real serial interrupt code, to "support" Copilot */
#ifdef CONFIG_XCOPILOT_BUGS
#undef USE_INTS
@@ -66,9 +64,84 @@
#define USE_INTS
#endif

+/*
+ * I believe this is the optimal setting that reduces the number of interrupts.
+ * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
+ * if that bothers you), but in most cases it will not, since we try to
+ * transmit characters every time rs_interrupt is called. Thus, quite often
+ * you'll see that a receive interrupt occures before the transmit one.
+ * -- Vladimir Gurevich
+ */
+#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
+
+/*
+ * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
+ * "Old data interrupt" which occures whenever the data stay in the FIFO
+ * longer than 30 bits time. This allows us to use FIFO without compromising
+ * latency. '328 does not have this feature and without the real 328-based
+ * board I would assume that RXRE is the safest setting.
+ *
+ * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
+ * interrupts. RXFE (receive queue full) causes the system to lose data
+ * at least at 115200 baud
+ *
+ * If your board is busy doing other stuff, you might consider to use
+ * RXRE (data ready intrrupt) instead.
+ *
+ * The other option is to make these INTR masks run-time configurable, so
+ * that people can dynamically adapt them according to the current usage.
+ * -- Vladimir Gurevich
+ */
+
+/* (es) */
+#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
+#elif defined(CONFIG_M68328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
+#else
+#error Please, define the Rx interrupt events for your CPU
+#endif
+/* (/es) */
+
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * For definitions of the flags field, see serial.h
+ */
+struct m68k_serial {
+ char is_cons; /* Is this our console. */
+ int magic;
+ int baud_base;
+ int port;
+ int irq;
+ int flags; /* defined in tty.h */
+ int type; /* UART type */
+ struct tty_struct *tty;
+ int custom_divisor;
+ int x_char; /* xon/xoff character */
+ int close_delay;
+ unsigned short closing_wait;
+ int line;
+ int count; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+};
+
+#define SERIAL_MAGIC 0x5301
+
+/*
+ * Define the number of ports supported and their irqs.
+ */
+#define NR_PORTS 1
+
static struct m68k_serial m68k_soft[NR_PORTS];

-static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
+static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };

/* multiple ports are contiguous in memory */
m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
deleted file mode 100644
index 971ead5..0000000
--- a/drivers/tty/serial/68328serial.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* 68328serial.h: Definitions for the mc68328 serial driver.
- *
- * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- *
- * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
- */
-
-#ifndef _MC683XX_SERIAL_H
-#define _MC683XX_SERIAL_H
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- * -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real 328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- * -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct m68k_serial {
- char is_cons; /* Is this our console. */
- int magic;
- int baud_base;
- int port;
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int close_delay;
- unsigned short closing_wait;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-};
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-#define UART_IRQ_DEFNS {UART_IRQ_NUM}
-
-#endif /* !(_MC683XX_SERIAL_H) */
--
1.7.9.2



\
 
 \ /
  Last update: 2012-04-02 14:01    [W:0.193 / U:3.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site