lkml.org 
[lkml]   [2012]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 52/69] TTY: 68328serial, remove unused stuff from m68k_serial
Date
Not everything from struct m68k_serial is really used. So remove
unused or only-set members of that structure. Next step is to move it
to 68328serial.c and remove 68328serial.h completely.

This change also takes status_handle and batten_down_hatches away
since they use break_abort but do nothing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/tty/serial/68328serial.c | 36 ++++--------------------------------
drivers/tty/serial/68328serial.h | 16 ----------------
2 files changed, 4 insertions(+), 48 deletions(-)

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index bf5f811..c1cd214 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -213,25 +213,6 @@ static void rs_start(struct tty_struct *tty)
local_irq_restore(flags);
}

-/* Drop into either the boot monitor or kadb upon receiving a break
- * from keyboard/console input.
- */
-static void batten_down_hatches(void)
-{
- /* Drop into the debugger */
-}
-
-static void status_handle(struct m68k_serial *info, unsigned short status)
-{
- /* If this is console input and this is a
- * 'break asserted' status change interrupt
- * see if we can drop into the debugger
- */
- if((status & URX_BREAK) && info->break_abort)
- batten_down_hatches();
- return;
-}
-
static void receive_chars(struct m68k_serial *info, unsigned short rx)
{
struct tty_struct *tty = info->tty;
@@ -248,7 +229,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)

if(info->is_cons) {
if(URX_BREAK & rx) { /* whee, break received */
- status_handle(info, rx);
return;
#ifdef CONFIG_MAGIC_SYSRQ
} else if (ch == 0x10) { /* ^P */
@@ -269,16 +249,13 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)

flag = TTY_NORMAL;

- if(rx & URX_PARITY_ERROR) {
+ if (rx & URX_PARITY_ERROR)
flag = TTY_PARITY;
- status_handle(info, rx);
- } else if(rx & URX_OVRUN) {
+ else if (rx & URX_OVRUN)
flag = TTY_OVERRUN;
- status_handle(info, rx);
- } else if(rx & URX_FRAME_ERROR) {
+ else if (rx & URX_FRAME_ERROR)
flag = TTY_FRAME;
- status_handle(info, rx);
- }
+
tty_insert_flip_char(tty, ch, flag);
#ifndef CONFIG_XCOPILOT_BUGS
} while((rx = uart->urx.w) & URX_DATA_READY);
@@ -369,7 +346,6 @@ static int startup(struct m68k_serial * info)
*/

uart->ustcnt = USTCNT_UEN;
- info->xmit_fifo_size = 1;
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
(void)uart->urx.w;

@@ -499,7 +475,6 @@ static void change_speed(struct m68k_serial *info)
i = (i & ~CBAUDEX) + B38400;
}

- info->baud = baud_table[i];
uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);

@@ -1034,7 +1009,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)

tty_ldisc_flush(tty);
tty->closing = 0;
- info->event = 0;
info->tty = NULL;
#warning "This is not and has never been valid so fix it"
#if 0
@@ -1070,7 +1044,6 @@ void rs_hangup(struct tty_struct *tty)

rs_flush_buffer(tty);
shutdown(info);
- info->event = 0;
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = NULL;
@@ -1270,7 +1243,6 @@ rs68328_init(void)
info->close_delay = 50;
info->closing_wait = 3000;
info->x_char = 0;
- info->event = 0;
info->count = 0;
info->blocked_open = 0;
init_waitqueue_head(&info->open_wait);
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index a804ea5..971ead5 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -60,16 +60,7 @@
*/

struct m68k_serial {
- char soft_carrier; /* Use soft carrier on this channel */
- char break_abort; /* Is serial console in, so process brk/abrt */
char is_cons; /* Is this our console. */
-
- /* We need to know the current clock divisor
- * to read the bps rate the chip has currently
- * loaded.
- */
- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
- int baud;
int magic;
int baud_base;
int port;
@@ -77,17 +68,10 @@ struct m68k_serial {
int flags; /* defined in tty.h */
int type; /* UART type */
struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int timeout;
- int xmit_fifo_size;
int custom_divisor;
int x_char; /* xon/xoff character */
int close_delay;
unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- unsigned long last_active;
int line;
int count; /* # of fd on device */
int blocked_open; /* # of blocked opens */
--
1.7.9.2



\
 
 \ /
  Last update: 2012-04-02 13:59    [W:0.292 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site