lkml.org 
[lkml]   [2012]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/12] USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt
Date
Now that we are using irqdomains, we need to convert GPIO pins to Linux
IRQ numbers using the gpio_to_irq() function.
This call is added to request/free_irq calls.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org
---
drivers/usb/gadget/at91_udc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0c935d7..9d7bcd9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- 0, driver_name, udc)) {
+ if (request_irq(gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
retval = -EBUSY;
@@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
return 0;
fail4:
if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
fail3:
if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
@@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
gpio_free(udc->board.vbus_pin);
}
free_irq(udc->udp_irq, udc);
--
1.7.10


\
 
 \ /
  Last update: 2012-04-16 11:23    [W:0.191 / U:3.436 seconds]
©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site