lkml.org 
[lkml]   [2012]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 08/12] atl1c: wrong register used to stop TXQ
    Date
    function atl1c_stop_mac uses wrong register of REG_TWSI_CTRL
    to stop mac, replace it with REG_TXQ_CTRL.

    Signed-off-by: xiong <xiong@qca.qualcomm.com>
    Tested-by: Liu David <dwliu@qca.qualcomm.com>
    ---
    drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +-
    1 files changed, 1 insertions(+), 1 deletions(-)

    diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    index ca1259d..b36c033 100644
    --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    @@ -1142,7 +1142,7 @@ static int atl1c_stop_mac(struct atl1c_hw *hw)

    AT_READ_REG(hw, REG_TXQ_CTRL, &data);
    data &= ~TXQ_CTRL_EN;
    - AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
    + AT_WRITE_REG(hw, REG_TXQ_CTRL, data);

    atl1c_wait_until_idle(hw);

    --
    1.7.7


    \
     
     \ /
      Last update: 2012-04-14 12:03    [W:0.022 / U:0.244 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site