lkml.org 
[lkml]   [2012]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 28/37] atl1c: remove PHY polling from atl1c_open
    Date
    PHY polling code for FPGA is considered in every MDIO R/W API.
    no need to add additional code to atl1c_open.

    Signed-off-by: xiong <xiong@qca.qualcomm.com>
    Tested-by: Liu David <dwliu@qca.qualcomm.com>
    ---
    drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 7 -------
    1 files changed, 0 insertions(+), 7 deletions(-)

    diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    index a85f2af..e43f42f 100644
    --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    @@ -2272,13 +2272,6 @@ static int atl1c_open(struct net_device *netdev)
    if (unlikely(err))
    goto err_up;

    - if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
    - u32 phy_data;
    -
    - AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data);
    - phy_data |= MDIO_CTRL_AP_EN;
    - AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data);
    - }
    return 0;

    err_up:
    --
    1.7.7


    \
     
     \ /
      Last update: 2012-04-13 02:25    [W:0.030 / U:1.396 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site