lkml.org 
[lkml]   [2012]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Subject[PATCH] regulator: Convert anatop to use a struct to pass in regulator runtime configuration
    From
    Date
    Signed-off-by: Axel Lin <axel.lin@gmail.com>
    ---
    drivers/regulator/anatop-regulator.c | 9 +++++++--
    1 files changed, 7 insertions(+), 2 deletions(-)

    diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
    index 81fd606..49b2112 100644
    --- a/drivers/regulator/anatop-regulator.c
    +++ b/drivers/regulator/anatop-regulator.c
    @@ -122,6 +122,7 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
    struct anatop_regulator *sreg;
    struct regulator_init_data *initdata;
    struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
    + struct regulator_config config = { };
    int ret = 0;

    initdata = of_get_regulator_init_data(dev, np);
    @@ -178,9 +179,13 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
    rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
    / 25000 + 1;

    + config.dev = &pdev->dev;
    + config.init_data = initdata;
    + config.driver_data = sreg;
    + config.of_node = pdev->dev.of_node;
    +
    /* register regulator */
    - rdev = regulator_register(rdesc, dev,
    - initdata, sreg, pdev->dev.of_node);
    + rdev = regulator_register(rdesc, &config);
    if (IS_ERR(rdev)) {
    dev_err(dev, "failed to register %s\n",
    rdesc->name);
    --
    1.7.5.4




    \
     
     \ /
      Last update: 2012-04-10 16:47    [W:0.074 / U:0.324 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site