Messages in this thread Patch in this message | | | Date | Fri, 09 Mar 2012 11:02:30 -0800 | From | Greg KH <> | Subject | [ 28/95] mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 |
| |
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sascha Hauer <s.hauer@pengutronix.de>
commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream.
On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC.
The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci imx_data->scratchpad = val; return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) - && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || + host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; if (is_imx6q_usdhc(imx_data)) {
| |