lkml.org 
[lkml]   [2012]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
Date
Felipe Balbi <balbi@ti.com> writes:

> Hi,
>
> On Thu, Mar 01, 2012 at 12:36:57PM -0800, Kevin Hilman wrote:
>> Matt Porter <mporter@ti.com> writes:
>>
>> > This fixes smsc911x support on platforms using gpmc_smsc911x_init().
>> >
>> > Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
>> > the requirement that platforms provide vdd33a and vddvario supplies.
>> >
>> > Signed-off-by: Matt Porter <mporter@ti.com>
>>
>> [...]
>>
>> > /*
>> > * Initialize smsc911x device connected to the GPMC. Note that we
>> > * assume that pin multiplexing is done in the board-*.c file,
>> > @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
>> >
>> > gpmc_cfg = board_data;
>> >
>> > + ret = platform_device_register(&gpmc_smsc911x_regulator);
>> > + if (ret < 0) {
>> > + pr_err("Unable to register smsc911x regulators: %d\n", ret);
>> > + return;
>> > + }
>> > +
>>
>> Boards that have more than one instance of the smsc911x (OMAP3/Overo)
>> barf here because of trying to register the same device twice.
>>
>> We need something like the patch below to make Overo boot again.
>>
>> Kevin
>>
>>
>>
>> From 4114dea2fb897ab75d05eaa943d29454034fc025 Mon Sep 17 00:00:00 2001
>> From: Kevin Hilman <khilman@ti.com>
>> Date: Thu, 1 Mar 2012 12:30:42 -0800
>> Subject: [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulators once
>>
>> commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x
>> regulators) added regulators which are registered during
>> gpmc_smsc911x_init(). However, some platforms (OMAP3/Overo) have more
>> than one instance of the SMSC911x and result in attempting to register
>> the same regulator more than once which causes a panic(). Fix this by
>> tracking the regulator registration ensuring only a single device is
>> registered.
>>
>> Cc: Matt Porter <mporter@ti.com>
>> Signed-off-by: Kevin Hilman <khilman@ti.com>
>> ---
>> arch/arm/mach-omap2/gpmc-smsc911x.c | 14 ++++++++++----
>> 1 file changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
>> index bbb870c..95e6c7d 100644
>> --- a/arch/arm/mach-omap2/gpmc-smsc911x.c
>> +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
>> @@ -88,6 +88,8 @@ static struct platform_device gpmc_smsc911x_regulator = {
>> },
>> };
>>
>> +static bool regulator_registered;
>> +
>> /*
>> * Initialize smsc911x device connected to the GPMC. Note that we
>> * assume that pin multiplexing is done in the board-*.c file,
>> @@ -101,10 +103,14 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
>>
>> gpmc_cfg = board_data;
>>
>> - ret = platform_device_register(&gpmc_smsc911x_regulator);
>> - if (ret < 0) {
>> - pr_err("Unable to register smsc911x regulators: %d\n", ret);
>> - return;
>> + if (!regulator_registered) {
>> + ret = platform_device_register(&gpmc_smsc911x_regulator);
>> + if (ret < 0) {
>> + pr_err("Unable to register smsc911x regulators: %d\n",
>> + ret);
>> + return;
>> + }
>> + regulator_registered = true;
>
> Wow, this is quite a hack. Is the regulator part of the SMSC911x
> device or is it outside ? If it's outside the SMSC91xx (which I
> believe it is) there should be a regulator driver instead of this
> hack. For boards which don't provide such a regulator (and tie the
> supply pin to some constant voltage source) there should be a constant
> regulator supplying the pin. But this patch is quite hacky.

Are you referring to my patch or to the original $SUBJECT patch? It's
not terribly clear.

My patch doesn't add any regulators, it just fixes a bug when this init
function is called more than once.

The addition of the regulators was done in $SUBJECT patch, not my fix.

In either case $SUBJECT patch is already in Tony's fixes queue, so if it
is going be merged, then my fix above is needed also to not break
Overo and any other platform that has more than one smsc911x instance.

Kevin


\
 
 \ /
  Last update: 2012-03-05 19:21    [W:0.119 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site