lkml.org 
[lkml]   [2012]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 60/68] TTY: amiserial, use tty_port_block_til_ready
Date
Hmm, 150 lines of duplicated stuff is gone now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/tty/amiserial.c | 148 +----------------------------------------------
1 file changed, 1 insertion(+), 147 deletions(-)

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 61d7461..8cc8e15 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1556,119 +1556,6 @@ static void rs_hangup(struct tty_struct *tty)
}

/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct serial_state *info)
-{
-#ifdef DECLARE_WAITQUEUE
- DECLARE_WAITQUEUE(wait, current);
-#else
- struct wait_queue wait = { current, NULL };
-#endif
- struct tty_port *port = &info->tport;
- int retval;
- int do_clocal = 0, extra_count = 0;
- unsigned long flags;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) ||
- (port->flags & ASYNC_CLOSING)) {
- if (port->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&port->close_wait);
-#ifdef SERIAL_DO_RESTART
- return ((port->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttys%d, count = %d\n",
- info->line, port->count);
-#endif
- local_irq_save(flags);
- if (!tty_hung_up_p(filp)) {
- extra_count = 1;
- port->count--;
- }
- local_irq_restore(flags);
- port->blocked_open++;
- while (1) {
- if (tty->termios->c_cflag & CBAUD)
- tty_port_raise_dtr_rts(port);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || tty_port_carrier_raised(port)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttys%d, count = %d\n",
- info->line, port->count);
-#endif
- tty_unlock();
- schedule();
- tty_lock();
- }
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- if (extra_count)
- port->count++;
- port->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttys%d, count = %d\n",
- info->line, port->count);
-#endif
- if (retval)
- return retval;
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
@@ -1687,47 +1574,14 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;

-#ifdef SERIAL_DEBUG_OPEN
- printk("rs_open %s, count = %d\n", tty->name, info->count);
-#endif
tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

- /*
- * If the port is the middle of closing, bail out now
- */
- if (tty_hung_up_p(filp) ||
- (port->flags & ASYNC_CLOSING)) {
- if (port->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&port->close_wait);
-#ifdef SERIAL_DO_RESTART
- return ((port->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * Start up serial port
- */
retval = startup(tty, info);
if (retval) {
return retval;
}

- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("rs_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("rs_open %s successful...", tty->name);
-#endif
- return 0;
+ return tty_port_block_til_ready(port, tty, filp);
}

/*
--
1.7.9.2



\
 
 \ /
  Last update: 2012-03-05 15:05    [W:0.497 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site