lkml.org 
[lkml]   [2012]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/76] ARM: kirkwood: Consolidate time keeping and irq enable
Date
From: Robert Lee <rob.lee@linaro.org>

Enable core cpuidle timekeeping and irq enabling and remove that
handling from this code.

Signed-off-by: Robert Lee <rob.lee@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
arch/arm/mach-kirkwood/cpuidle.c | 72 +++++++++++---------------------------
1 file changed, 21 insertions(+), 51 deletions(-)

diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index 7088180..0f17109 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -20,77 +20,47 @@
#include <linux/io.h>
#include <linux/export.h>
#include <asm/proc-fns.h>
+#include <asm/cpuidle.h>
#include <mach/kirkwood.h>

#define KIRKWOOD_MAX_STATES 2

-static struct cpuidle_driver kirkwood_idle_driver = {
- .name = "kirkwood_idle",
- .owner = THIS_MODULE,
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
-
/* Actual code that puts the SoC in different idle states */
static int kirkwood_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
- struct timeval before, after;
- int idle_time;
-
- local_irq_disable();
- do_gettimeofday(&before);
- if (index == 0)
- /* Wait for interrupt state */
- cpu_do_idle();
- else if (index == 1) {
- /*
- * Following write will put DDR in self refresh.
- * Note that we have 256 cycles before DDR puts it
- * self in self-refresh, so the wait-for-interrupt
- * call afterwards won't get the DDR from self refresh
- * mode.
- */
- writel(0x7, DDR_OPERATION_BASE);
- cpu_do_idle();
- }
- do_gettimeofday(&after);
- local_irq_enable();
- idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
- (after.tv_usec - before.tv_usec);
-
- /* Update last residency */
- dev->last_residency = idle_time;
+ writel(0x7, DDR_OPERATION_BASE);
+ cpu_do_idle();

return index;
}

+static struct cpuidle_driver kirkwood_idle_driver = {
+ .name = "kirkwood_idle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = kirkwood_enter_idle,
+ .exit_latency = 10,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "DDR SR",
+ .desc = "WFI and DDR Self Refresh",
+ },
+ .state_count = KIRKWOOD_MAX_STATES,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
/* Initialize CPU idle by registering the idle states */
static int kirkwood_init_cpuidle(void)
{
struct cpuidle_device *device;
- struct cpuidle_driver *driver = &kirkwood_idle_driver;

device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
device->state_count = KIRKWOOD_MAX_STATES;
- driver->state_count = KIRKWOOD_MAX_STATES;
-
- /* Wait for interrupt state */
- driver->states[0].enter = kirkwood_enter_idle;
- driver->states[0].exit_latency = 1;
- driver->states[0].target_residency = 10000;
- driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(driver->states[0].name, "WFI");
- strcpy(driver->states[0].desc, "Wait for interrupt");
-
- /* Wait for interrupt and DDR self refresh state */
- driver->states[1].enter = kirkwood_enter_idle;
- driver->states[1].exit_latency = 10;
- driver->states[1].target_residency = 10000;
- driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(driver->states[1].name, "DDR SR");
- strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");

cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
--
1.7.10.rc2.19.gfae9d


\
 
 \ /
  Last update: 2012-03-30 13:17    [W:0.163 / U:0.016 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site