lkml.org 
[lkml]   [2012]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
From
Date
What we want is to disable output by setting [LDOx|DCx]_HIB_MODE bits.
Current code also clears other bits in LDOx/DCDCx Low Power register.

R202 (CAh) LDO1 Low Power
BIT[13:12] LDO1 Hibernate behaviour:
00 = Select voltage image settings
01 = disable output
10 = reserved
11 = reserved

R182 (B6h) DCDC1 Low Power
BIT[14:12] DC-DC1 Hibernate behaviour:
000 = Use current settings (no change)
001 = Select voltage image settings
010 = Force standby mode
011 = Force standby mode and voltage image settings.
100 = Force LDO mode
101 = Force LDO mode and voltage image settings.
110 = Reserved.
111 = Disable output

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/wm8350-regulator.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index c5f3b40..05ecfb8 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -535,25 +535,25 @@ static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev)
val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER);
wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER,
- WM8350_DCDC_HIB_MODE_DIS);
+ val | WM8350_DCDC_HIB_MODE_DIS);
break;
case WM8350_DCDC_3:
val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER);
wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER,
- WM8350_DCDC_HIB_MODE_DIS);
+ val | WM8350_DCDC_HIB_MODE_DIS);
break;
case WM8350_DCDC_4:
val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER);
wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER,
- WM8350_DCDC_HIB_MODE_DIS);
+ val | WM8350_DCDC_HIB_MODE_DIS);
break;
case WM8350_DCDC_6:
val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER);
wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER,
- WM8350_DCDC_HIB_MODE_DIS);
+ val | WM8350_DCDC_HIB_MODE_DIS);
break;
case WM8350_DCDC_2:
case WM8350_DCDC_5:
@@ -749,7 +749,7 @@ static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev)

/* all LDOs have same mV bits */
val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK;
- wm8350_reg_write(wm8350, volt_reg, WM8350_LDO1_HIB_MODE_DIS);
+ wm8350_reg_write(wm8350, volt_reg, val | WM8350_LDO1_HIB_MODE_DIS);
return 0;
}

--
1.7.5.4




\
 
 \ /
  Last update: 2012-03-29 04:49    [W:0.040 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site