lkml.org 
[lkml]   [2012]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRE: [PATCH V4] TAOS tsl2x7x
Date
From
Hello Jonathan,
Still a little confused (and stuck) here.
Using your code from the tsl2563:
1. The case for IIO_LIGHT appears to return the computed LUX.
Yet you have no ".processed_val = 1: in your channel table - so where in in_illuminance0_input (aka lux) coming from?

2. The case for IIO_INTENSITY looks for 'chan->channel' to determine when to present 'chip->data0' or 'chip->data1' -
But it appears that 'chan->channel' will always be 0 as '.channel =' isn't defined in the table?
So how can you ever get chip->data01?

For example, tsl2563 code portion follows.

<Snip>
static int tsl2563_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long m)
{
int ret = -EINVAL;
u32 calib0, calib1;
struct tsl2563_chip *chip = iio_priv(indio_dev);

mutex_lock(&chip->lock);
switch (m) {
case 0:
switch (chan->type) {
case IIO_LIGHT:
ret = tsl2563_get_adc(chip);
if (ret)
goto error_ret;
calib0 = calib_adc(chip->data0, chip->calib0) *
chip->cover_comp_gain;
calib1 = calib_adc(chip->data1, chip->calib1) *
chip->cover_comp_gain;
*val = adc_to_lux(calib0, calib1);
ret = IIO_VAL_INT;
break;
case IIO_INTENSITY:
ret = tsl2563_get_adc(chip);
if (ret)
goto error_ret;
if (chan->channel == 0)
*val = chip->data0;
else
*val = chip->data1;
ret = IIO_VAL_INT;
break;
default:
break;
}
break;

case IIO_CHAN_INFO_CALIBSCALE:
if (chan->channel == 0)
*val = calib_to_sysfs(chip->calib0);
else
*val = calib_to_sysfs(chip->calib1);
ret = IIO_VAL_INT;
break;
default:
ret = -EINVAL;
goto error_ret;
}

error_ret:
mutex_unlock(&chip->lock);
return ret;
}

static const struct iio_chan_spec tsl2563_channels[] = {
{
.type = IIO_LIGHT,
.indexed = 1,
.channel = 0,
}, {
.type = IIO_INTENSITY,
.modified = 1,
.channel2 = IIO_MOD_LIGHT_BOTH,
.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING) |
IIO_EV_BIT(IIO_EV_TYPE_THRESH,
IIO_EV_DIR_FALLING)),
}, {
.type = IIO_INTENSITY,
.modified = 1,
.channel2 = IIO_MOD_LIGHT_IR,
.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
}
};


What am I not seeing here?

Jon

> -----Original Message-----
> From: Jonathan Cameron [mailto:jic23@cam.ac.uk]
> Sent: Friday, March 23, 2012 8:54 AM
> To: Jon Brenner
> Cc: linux-iio; Linux Kernel
> Subject: Re: [PATCH V4] TAOS tsl2x7x
>
> On 3/21/2012 4:16 PM, Jon Brenner wrote:
> > TAOS device driver (version 4) for the tsl/tmd 2771 and 2772 device families
> (inc. all variants).
> Mostly looking good...
>
> Couple of issues remaining.
> * Why have processed and raw accesses to the same channels? That is
> definitely not the intent.
> Either it's worth processing these raw adc channels in kernel, or not.
> If it isn't you certainly shouldn't
> be munging together the two adc's into a single value.
>
> So you have done this for two reasons...
> * For light sensors it was to allow the processed illuminance value and
> also the raw adc values.
> Previously we have done this by having IIO_LIGHT (and hence illuminance)
> for the processed one
> and marking the other two as IIO_INTENSITY with modifiers for the
> frequency range they cover...
> * For proximity one is the raw reading (fine), the other is a means of
> getting at the threshold event
> if interrupts are not supported. It is done by a software comparison of
> the threshold and the raw
> reading. This should not be in driver as if the functionality is
> desired, it should be done in userspace.
>
> Various other minor bits like error paths that don't clean up commented
> inline.
>
>
> >
> > Signed-off-by: Jon Brenner<jbrenner@taosinc.com>
> > ---
> > .../light/sysfs-bus-iio-light-tsl2583 | 6 +
> > .../light/sysfs-bus-iio-light-tsl2x7x | 20 +
> > drivers/staging/iio/Documentation/sysfs-bus-iio | 7 +
> > .../staging/iio/Documentation/sysfs-bus-iio-light | 8 +-
> > .../iio/Documentation/sysfs-bus-iio-light-tsl2583 | 20 -
> > drivers/staging/iio/light/Kconfig | 8 +
> > drivers/staging/iio/light/Makefile | 1 +
> > drivers/staging/iio/light/tsl2x7x_core.c | 1911 ++++++++++++++++++++
> > drivers/staging/iio/light/tsl2x7x_core.h | 75 +
> > 9 files changed, 2032 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
> b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
> > new file mode 100644
> > index 0000000..8f2a038
> > --- /dev/null
> > +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
> > @@ -0,0 +1,6 @@
> > +What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
> > +KernelVersion: 2.6.37
> > +Contact: linux-iio@vger.kernel.org
> > +Description:
> > + This property causes an internal calibration of the als gain trim
> > + value which is later used in calculating illuminance in lux.
> > diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
> b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
> > new file mode 100644
> > index 0000000..cceadae
> > --- /dev/null
> > +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
> > @@ -0,0 +1,20 @@
> > +What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
> > +KernelVersion: 2.6.37
> > +Contact: linux-iio@vger.kernel.org
> > +Description:
> > + This property causes an internal calibration of the als gain trim
> > + value which is later used in calculating illuminance in lux.
> > +
> > +What: /sys/bus/iio/devices/device[n]/illuminance0_both_raw
> > +KernelVersion: 3.3-rc1
> > +Contact: linux-iio@vger.kernel.org
> > +Description:
> > + Simultainious ALS channel data.
> That wasn't the intent of 'both' at all. (+ typo). It means a raw
> reading from a diod that
> detects the 'sum' of infrared and visible.
> > +
> > +What: /sys/bus/iio/devices/device[n]/proximity_calibrate
> > +KernelVersion: 3.3-rc1
> > +Contact: linux-iio@vger.kernel.org
> > +Description:
> > + Causes an recalculation and adjustment to the
> > + proximity_thresh_rising_value.
> > +
> > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio
> b/drivers/staging/iio/Documentation/sysfs-bus-iio
> > index 46a995d..5b2b5d3 100644
> > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio
> > +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio
> > @@ -258,6 +258,8 @@ What
> /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
> > What
> /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
> > What
> /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
> > What
> /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
> > +what
> /sys/bus/iio/devices/iio:deviceX/illuminance0_calibscale
> > +what /sys/bus/iio/devices/iio:deviceX/proximity_calibscale
> > KernelVersion: 2.6.35
> > Contact: linux-iio@vger.kernel.org
> > Description:
> > @@ -457,6 +459,10 @@ What:
> /sys/.../events/in_voltageY_raw_thresh_falling_value
> > What: /sys/.../events/in_voltageY_raw_thresh_falling_value
> > What: /sys/.../events/in_tempY_raw_thresh_falling_value
> > What: /sys/.../events/in_tempY_raw_thresh_falling_value
> > +What: /sys/.../events/illuminance0_thresh_falling_value
> > +what: /sys/.../events/illuminance0_thresh_rising_value
> > +what: /sys/.../events/proximity_thresh_falling_value
> > +what: /sys/.../events/proximity_thresh_rising_value
> > KernelVersion: 2.6.37
> > Contact: linux-iio@vger.kernel.org
> > Description:
> > @@ -739,3 +745,4 @@ Description:
> > system. To minimize the current consumption of the system,
> > the bridge can be disconnected (when it is not being used
> > using the bridge_switch_en attribute.
> > +
> spurious blank line?
> > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> > index edbf470..4385c70 100644
> > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> > +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
> > @@ -76,10 +76,10 @@ Contact: linux-iio@vger.kernel.org
> > Description:
> > This property gets/sets the sensors ADC analog integration
> time.
> >
> > -What: /sys/bus/iio/devices/device[n]/illuminance0_calibscale
> > +What: /sys/bus/iio/devices/device[n]/lux_table
> > KernelVersion: 2.6.37
> > Contact: linux-iio@vger.kernel.org
> > Description:
> > - Hardware or software applied calibration scale factor assumed
> > - to account for attenuation due to industrial design (glass
> > - filters or aperture holes).
> > + This property gets/sets the table of coefficients
> > + used in calculating illuminance in lux.
> > +
> > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
> b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
> > deleted file mode 100644
> > index 660781d..0000000
> > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
> > +++ /dev/null
> > @@ -1,20 +0,0 @@
> > -What: /sys/bus/iio/devices/device[n]/lux_table
> > -KernelVersion: 2.6.37
> > -Contact: linux-iio@vger.kernel.org
> > -Description:
> > - This property gets/sets the table of coefficients
> > - used in calculating illuminance in lux.
> > -
> > -What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
> > -KernelVersion: 2.6.37
> > -Contact: linux-iio@vger.kernel.org
> > -Description:
> > - This property causes an internal calibration of the als gain trim
> > - value which is later used in calculating illuminance in lux.
> > -
> > -What:
> /sys/bus/iio/devices/device[n]/illuminance0_input_target
> > -KernelVersion: 2.6.37
> > -Contact: linux-iio@vger.kernel.org
> > -Description:
> > - This property is the known externally illuminance (in lux).
> > - It is used in the process of calibrating the device accuracy.
> > diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> > index e7e9159..976f790 100644
> > --- a/drivers/staging/iio/light/Kconfig
> > +++ b/drivers/staging/iio/light/Kconfig
> > @@ -31,4 +31,12 @@ config TSL2583
> > Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
> > Access ALS data via iio, sysfs.
> >
> > +config TSL2x7x
> > + tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and
> proximity sensors"
> > + depends on I2C
> > + help
> > + Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572,
> tsl2672,
> > + tmd2672, tsl2772, tmd2772 devices.
> > + Provides iio_events and direct access via sysfs.
> > +
> > endmenu
> > diff --git a/drivers/staging/iio/light/Makefile
> b/drivers/staging/iio/light/Makefile
> > index 3011fbf..ff12c4b 100644
> > --- a/drivers/staging/iio/light/Makefile
> > +++ b/drivers/staging/iio/light/Makefile
> > @@ -5,3 +5,4 @@
> > obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> > obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> > obj-$(CONFIG_TSL2583) += tsl2583.o
> > +obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
> > diff --git a/drivers/staging/iio/light/tsl2x7x_core.c
> b/drivers/staging/iio/light/tsl2x7x_core.c
> > new file mode 100644
> > index 0000000..c0d9d6e
> > --- /dev/null
> > +++ b/drivers/staging/iio/light/tsl2x7x_core.c
> > @@ -0,0 +1,1911 @@
> > +/*
> > + * Device driver for monitoring ambient light intensity in (lux)
> > + * and proximity detection (prox) within the TAOS TSL2X7X family of devices.
> > + *
> > + * Copyright (c) 2012, TAOS Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, write to the Free Software Foundation, Inc.,
> > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> > + */
> > +
> > +#include<linux/kernel.h>
> > +#include<linux/i2c.h>
> > +#include<linux/errno.h>
> > +#include<linux/delay.h>
> > +#include<linux/mutex.h>
> > +#include<linux/interrupt.h>
> > +#include<linux/slab.h>
> > +#include<linux/module.h>
> > +#include<linux/version.h>
> > +#include "tsl2x7x_core.h"
> > +#include "../events.h"
> > +#include "../iio.h"
> > +#include "../sysfs.h"
> > +
> > +/* Cal defs*/
> > +#define PROX_STAT_CAL 0
> > +#define PROX_STAT_SAMP 1
> > +#define MAX_SAMPLES_CAL 200
> > +
> > +/* TSL2X7X Device ID */
> > +#define TRITON_ID 0x00
> > +#define SWORDFISH_ID 0x30
> > +#define HALIBUT_ID 0x20
> > +
> > +/* Lux calculation constants */
> > +#define TSL2X7X_LUX_CALC_OVER_FLOW 65535
> > +
> > +/* TAOS Register definitions - note:
> > + * depending on device, some of these register are not used and the
> > + * register address is benign.
> > + */
> > +/* 2X7X register offsets */
> > +#define TSL2X7X_MAX_CONFIG_REG 16
> > +
> > +/* Device Registers and Masks */
> > +#define TSL2X7X_CNTRL 0x00
> > +#define TSL2X7X_ALS_TIME 0X01
> > +#define TSL2X7X_PRX_TIME 0x02
> > +#define TSL2X7X_WAIT_TIME 0x03
> > +#define TSL2X7X_ALS_MINTHRESHLO 0X04
> > +#define TSL2X7X_ALS_MINTHRESHHI 0X05
> > +#define TSL2X7X_ALS_MAXTHRESHLO 0X06
> > +#define TSL2X7X_ALS_MAXTHRESHHI 0X07
> > +#define TSL2X7X_PRX_MINTHRESHLO 0X08
> > +#define TSL2X7X_PRX_MINTHRESHHI 0X09
> > +#define TSL2X7X_PRX_MAXTHRESHLO 0X0A
> > +#define TSL2X7X_PRX_MAXTHRESHHI 0X0B
> > +#define TSL2X7X_PERSISTENCE 0x0C
> > +#define TSL2X7X_PRX_CONFIG 0x0D
> > +#define TSL2X7X_PRX_COUNT 0x0E
> > +#define TSL2X7X_GAIN 0x0F
> > +#define TSL2X7X_NOTUSED 0x10
> > +#define TSL2X7X_REVID 0x11
> > +#define TSL2X7X_CHIPID 0x12
> > +#define TSL2X7X_STATUS 0x13
> > +#define TSL2X7X_ALS_CHAN0LO 0x14
> > +#define TSL2X7X_ALS_CHAN0HI 0x15
> > +#define TSL2X7X_ALS_CHAN1LO 0x16
> > +#define TSL2X7X_ALS_CHAN1HI 0x17
> > +#define TSL2X7X_PRX_LO 0x18
> > +#define TSL2X7X_PRX_HI 0x19
> > +
> > +/* tsl2X7X cmd reg masks */
> > +#define TSL2X7X_CMD_REG 0x80
> > +#define TSL2X7X_CMD_SPL_FN 0x60
> > +
> > +#define TSL2X7X_CMD_PROX_INT_CLR 0X05
> > +#define TSL2X7X_CMD_ALS_INT_CLR 0x06
> > +#define TSL2X7X_CMD_PROXALS_INT_CLR 0X07
> > +
> > +/* tsl2X7X cntrl reg masks */
> > +#define TSL2X7X_CNTL_ADC_ENBL 0x02
> > +#define TSL2X7X_CNTL_PWR_ON 0x01
> > +
> > +/* tsl2X7X status reg masks */
> > +#define TSL2X7X_STA_ADC_VALID 0x01
> > +#define TSL2X7X_STA_PRX_VALID 0x02
> > +#define TSL2X7X_STA_ADC_PRX_VALID 0x03
> > +#define TSL2X7X_STA_ALS_INTR 0x10
> > +#define TSL2X7X_STA_ADC_INTR 0x10
> > +#define TSL2X7X_STA_PRX_INTR 0x20
> > +
> > +#define TSL2X7X_STA_ADC_INTR 0x10
> > +
> > +/* tsl2X7X cntrl reg masks */
> > +#define TSL2X7X_CNTL_REG_CLEAR 0x00
> > +#define TSL2X7X_CNTL_PROX_INT_ENBL 0X20
> > +#define TSL2X7X_CNTL_ALS_INT_ENBL 0X10
> > +#define TSL2X7X_CNTL_WAIT_TMR_ENBL 0X08
> > +#define TSL2X7X_CNTL_PROX_DET_ENBL 0X04
> > +#define TSL2X7X_CNTL_PWRON 0x01
> > +#define TSL2X7X_CNTL_ALSPON_ENBL 0x03
> > +#define TSL2X7X_CNTL_INTALSPON_ENBL 0x13
> > +#define TSL2X7X_CNTL_PROXPON_ENBL 0x0F
> > +#define TSL2X7X_CNTL_INTPROXPON_ENBL 0x2F
> > +
> > +/*Prox diode to use */
> > +#define TSL2X7X_DIODE0 0x10
> > +#define TSL2X7X_DIODE1 0x20
> > +#define TSL2X7X_DIODE_BOTH 0x30
> > +
> > +/* LED Power */
> > +#define TSL2X7X_mA100 0x00
> > +#define TSL2X7X_mA50 0x40
> > +#define TSL2X7X_mA25 0x80
> > +#define TSL2X7X_mA13 0xD0
> > +
> > +/*Common device IIO EventMask */
> > +#define TSL2X7X_EVENT_MASK \
> > + (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
> > + IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)),
> > +
> > +/* TAOS txx2x7x Device family members */
> > +enum {
> > + tsl2571,
> > + tsl2671,
> > + tmd2671,
> > + tsl2771,
> > + tmd2771,
> > + tsl2572,
> > + tsl2672,
> > + tmd2672,
> > + tsl2772,
> > + tmd2772
> > +};
> > +
> > +enum {
> > + TSL2X7X_CHIP_UNKNOWN = 0,
> > + TSL2X7X_CHIP_WORKING = 1,
> > + TSL2X7X_CHIP_SUSPENDED = 2
> > +};
> > +
> > +/* Per-device data */
> > +struct tsl2x7x_als_info {
> > + u16 als_ch0;
> > + u16 als_ch1;
> > + u16 lux;
> > +};
> > +
> > +/* proximity data */
> > +struct tsl2x7x_prox_info {
> > + u16 prox_data;
> > + int prox_event;
> > +};
> > +
> > +struct prox_stat {
> > + u16 min;
> > + u16 max;
> > + u16 mean;
> > + unsigned long stddev;
> > +};
> > +
> > +struct tsl2x7x_chip_info {
> > + int num_channels;
> > + struct iio_chan_spec channel[9];
> > + const struct iio_info *info;
> > +};
> > +
> > +struct tsl2X7X_chip {
> > + kernel_ulong_t id;
> > + struct mutex prox_mutex;
> > + struct mutex als_mutex;
> > + struct i2c_client *client;
> > + struct tsl2x7x_prox_info prox_cur_info;
> > + struct tsl2x7x_als_info als_cur_info;
> > + struct tsl2x7x_settings tsl2x7x_settings;
> > + struct tsl2X7X_platform_data *pdata;
> > + int als_time_scale;
> > + int als_saturation;
> > + int tsl2x7x_chip_status;
> > + u8 tsl2x7x_config[TSL2X7X_MAX_CONFIG_REG];
> > + const struct tsl2x7x_chip_info *chip_info;
> > + const struct iio_info *info;
> > + s64 event_timestamp;
> > + /* This structure is intentionally large to accommodate
> > + * updates via sysfs. */
> > + /* Sized to 9 = max 8 segments + 1 termination segment */
> > + struct tsl2x7x_lux tsl2x7x_device_lux[TSL2X7X_MAX_LUX_TABLE_SIZE];
> > +};
> > +
> > +/* Different devices require different coefficents */
> > +static const struct tsl2x7x_lux tsl2x71_lux_table[] = {
> > + { 14461, 611, 1211 },
> > + { 18540, 352, 623 },
> > + { 0, 0, 0 },
> > +};
> > +
> > +static const struct tsl2x7x_lux tmd2x71_lux_table[] = {
> > + { 11635, 115, 256 },
> > + { 15536, 87, 179 },
> > + { 0, 0, 0 },
> > +};
> > +
> > +static const struct tsl2x7x_lux tsl2x72_lux_table[] = {
> > + { 14013, 466, 917 },
> > + { 18222, 310, 552 },
> > + { 0, 0, 0 },
> > +};
> > +
> > +static const struct tsl2x7x_lux tmd2x72_lux_table[] = {
> > + { 13218, 130, 262 },
> > + { 17592, 92, 169 },
> > + { 0, 0, 0 },
> > +};
> > +
> > +static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
> check white space around here. looks like a mixture of tabs and spaces...
> > + [tsl2571] = tsl2x71_lux_table,
> > + [tsl2671] = tsl2x71_lux_table,
> > + [tmd2671] = tmd2x71_lux_table,
> > + [tsl2771] = tsl2x71_lux_table,
> > + [tmd2771] = tmd2x71_lux_table,
> > + [tsl2572] = tsl2x72_lux_table,
> > + [tsl2672] = tsl2x72_lux_table,
> > + [tmd2672] = tmd2x72_lux_table,
> > + [tsl2772] = tsl2x72_lux_table,
> > + [tmd2772] = tmd2x72_lux_table,
> > +};
> > +
> > +static const struct tsl2x7x_settings tsl2x7x_default_settings = {
> > + .als_time = 200,
> > + /* must be a multiple of 50mS */
> > + .als_gain = 0,
> > + /* this is actually an index into the gain table */
> > + .prx_time = 0xfe, /*5.4 mS */
> > + /* 2.7ms prox integration time - decrease to increase time */
> > + /* decreases in 2.7 ms intervals */
> > + .prox_gain = 1,
> > + /* these are bits 3:2 of reg 0x0f: 0=x1,1=x2,2=x4,3=x8 */
> > + /* assume clear glass as default */
> > + .wait_time = 245,
> > + /* Time between PRX and ALS cycles -decrease to increase time */
> > + /* decreases in 2.7 ms intervals */
> > + .prox_config = 0,
> > + /* Prox configuration filters */
> > + .als_gain_trim = 1000,
> > + /* default gain trim to account for aperture effects */
> > + .als_cal_target = 150,
> > + /* Known external ALS reading used for calibration */
> > + .als_thresh_low = 200,
> > + /* CH0 'low' count to trigger interrupt */
> > + .als_thresh_high = 256,
> > + /* CH0 'high' count to trigger interrupt */
> > + .als_persistence = 0xFF,
> > + /* Number of 'out of limits' ADC readings PRX/ALS*/
> > + .interrupts_en = 0x00,
> > + /* Default interrupt(s) enabled.
> > + * 0x00 = none, 0x10 = als, 0x20 = prx 0x30 = bth */
> > + .prox_thres_low = 0,
> > + .prox_thres_high = 512,
> > + /*default threshold adjust either manually or with cal routine*/
> > + .prox_max_samples_cal = 30,
> > + .prox_pulse_count = 8
> > +};
> > +
> > +static const s16 tsl2X7X_als_gainadj[] = {
> > + 1,
> > + 8,
> > + 16,
> > + 120
> > +};
> > +
> > +static const s16 tsl2X7X_prx_gainadj[] = {
> > + 1,
> > + 2,
> > + 4,
> > + 8
> > +};
> > +
> > +/* Channel variations */
> > +enum {
> > + ALS,
> > + PRX,
> > + ALSPRX,
> > + PRX2,
> > + ALSPRX2,
> > +};
> > +
> > +const u8 device_channel_config[] = {
> > + ALS,
> > + PRX,
> > + PRX,
> > + ALSPRX,
> > + ALSPRX,
> > + ALS,
> > + PRX2,
> > + PRX2,
> > + ALSPRX2,
> > + ALSPRX2
> > +};
> > +
> > +/*
> > + * Read a number of bytes starting at register (reg) location.
> > + * Return 0, or i2c_smbus_write_byte ERROR code.
> > + */
> > +static int
> > +tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
> > +{
> > + int ret;
> > +
> > + /* select register to write */
> > + ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg));
> > + if (ret< 0) {
> > + dev_err(&client->dev, "%s: failed to write register %x\n"
> > + , __func__, reg);
> > + return ret;
> > + }
> > + /* read the data */
> > + *val = i2c_smbus_read_byte(client);
> > +
> > + return 0;
> > +}
> > +
> I would much prefer if you'd use kernel-doc for comments oabout functions.
> > +/*
> > + * Reads and calculates current lux value.
> > + * The raw ch0 and ch1 values of the ambient light sensed in the last
> > + * integration cycle are read from the device.
> > + * Time scale factor array values are adjusted based on the integration time.
> > + * The raw values are multiplied by a scale factor, and device gain is obtained
> > + * using gain index. Limit checks are done next, then the ratio of a multiple
> > + * of ch1 value, to the ch0 value, is calculated. The array tsl2x7x_device_lux[]
> > + * declared above is then scanned to find the first ratio value that is just
> > + * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
> > + * the array are then used along with the time scale factor array values, to
> > + * calculate the lux.
> > + */
> > +static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> > +{
> > + u16 ch0, ch1; /* separated ch0/ch1 data from device */
> > + u32 lux; /* raw lux calculated from device data */
> > + u64 lux64;
> > + u32 ratio;
> > + u8 buf[4];
> > + struct tsl2x7x_lux *p;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int i, ret;
> > + u32 ch0lux = 0;
> > + u32 ch1lux = 0;
> > +
> > + if (mutex_trylock(&chip->als_mutex) == 0) {
> > + dev_info(&chip->client->dev, "tsl2x7x_get_lux device is
> busy\n");
> > + return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
> > + }
> > +
> > + if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) {
> > + /* device is not enabled */
> > + dev_err(&chip->client->dev, "%s: device is not enabled\n",
> > + __func__);
> > + ret = -EBUSY ;
> > + goto out_unlock;
> > + }
> > +
> > + ret = tsl2x7x_i2c_read(chip->client,
> > + (TSL2X7X_CMD_REG | TSL2X7X_STATUS),&buf[0]);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed to read CMD_REG\n", __func__);
> > + goto out_unlock;
> > + }
> > + /* is data new& valid */
> > + if (!(buf[0]& TSL2X7X_STA_ADC_VALID)) {
> > + dev_err(&chip->client->dev,
> > + "%s: data not valid yet\n", __func__);
> > + ret = chip->als_cur_info.lux; /* return LAST VALUE */
> > + goto out_unlock;
> > + }
> > +
> > + for (i = 0; i< 4; i++) {
> > + ret = tsl2x7x_i2c_read(chip->client,
> > + (TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i)),
> > + &buf[i]);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed to read. err=%x\n", __func__, ret);
> > + goto out_unlock;
> > + }
> > + }
> > +
> > + /* clear status, really interrupt status ( are off),
> > + but we use the bit anyway */
> > + ret = i2c_smbus_write_byte(chip->client,
> > + (TSL2X7X_CMD_REG |
> > + TSL2X7X_CMD_SPL_FN |
> > + TSL2X7X_CMD_ALS_INT_CLR));
> > +
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "i2c_write_command failed in %s, err = %d\n",
> > + __func__, ret);
> > + goto out_unlock; /* have no data, so return failure */
> > + }
> > +
> > + /* extract ALS/lux data */
> > + ch0 = le16_to_cpup((const __le16 *)&buf[0]);
> > + ch1 = le16_to_cpup((const __le16 *)&buf[2]);
> > +
> > + chip->als_cur_info.als_ch0 = ch0;
> > + chip->als_cur_info.als_ch1 = ch1;
> > +
> > + if ((ch0>= chip->als_saturation) || (ch1>= chip->als_saturation)) {
> > + lux = TSL2X7X_LUX_CALC_OVER_FLOW;
> > + goto return_max;
> > + }
> > +
> > + if (ch0 == 0) {
> > + /* have no data, so return LAST VALUE */
> > + ret = chip->als_cur_info.lux = 0;
> > + goto out_unlock;
> > + }
> > + /* calculate ratio */
> > + ratio = (ch1<< 15) / ch0;
> > + /* convert to unscaled lux using the pointer to the table */
> > + p = (struct tsl2x7x_lux *) chip->tsl2x7x_device_lux;
> > + while (p->ratio != 0&& p->ratio< ratio)
> > + p++;
> > +
> > + if (p->ratio == 0) {
> > + lux = 0;
> > + } else {
> > + ch0lux = DIV_ROUND_UP((ch0 * p->ch0),
> > + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
> > + ch1lux = DIV_ROUND_UP((ch1 * p->ch1),
> > + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
> > + lux = ch0lux - ch1lux;
> > + }
> > +
> > + /* note: lux is 31 bit max at this point */
> > + if (ch1lux> ch0lux) {
> > + dev_dbg(&chip->client->dev, "Returning last value\n");
> > + ret = chip->als_cur_info.lux;
> > + goto out_unlock;
> > + }
> > +
> > + /* adjust for active time scale */
> > + if (chip->als_time_scale == 0)
> > + lux = 0;
> > + else
> > + lux = (lux + (chip->als_time_scale>> 1)) /
> > + chip->als_time_scale;
> > +
> > + /* adjust for active gain scale
> > + * The tsl2x7x_device_lux tables have a factor of 256 built-in.
> > + * User-specified gain provides a multiplier.
> > + * Apply user-specified gain before shifting right to retain precision.
> > + * Use 64 bits to avoid overflow on multiplication.
> > + * Then go back to 32 bits before division to avoid using div_u64().
> > + */
> > + lux64 = lux;
> > + lux64 = lux64 * chip->tsl2x7x_settings.als_gain_trim;
> > + lux64>>= 8;
> > + lux = lux64;
> > + lux = (lux + 500) / 1000;
> > +
> > + if (lux> TSL2X7X_LUX_CALC_OVER_FLOW) /* check for overflow */
> > + lux = TSL2X7X_LUX_CALC_OVER_FLOW;
> > +
> > + /* Update the structure with the latest lux. */
> > +return_max:
> > + chip->als_cur_info.lux = lux;
> > + ret = lux;
> > +
> > +out_unlock:
> > + mutex_unlock(&chip->als_mutex);
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Proximity poll function - if valid data is available, read and form the ch0
> > + * and prox data values, check for limits on the ch0 value, and check the prox
> > + * data against the current thresholds, to set the event status accordingly.
> > + */
> > +static int tsl2x7x_prox_poll(struct iio_dev *indio_dev)
> > +{
> > +#define CONSECUTIVE_RETRIES 50
> > +
> > + int i;
> > + int ret;
> > + u8 status;
> > + u8 chdata[2];
> > + int err_cnt;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + if (mutex_trylock(&chip->prox_mutex) == 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: Can't get prox mutex\n", __func__);
> > + return -EBUSY;
> > + }
> > +
> > + err_cnt = 0;
> > +
> > +try_again:
> I'd like a comment on why this looping is necessary....
> > +
> > + ret = tsl2x7x_i2c_read(chip->client,
> > + (TSL2X7X_CMD_REG | TSL2X7X_STATUS),&status);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: i2c err=%d\n", __func__, ret);
> > + goto prox_poll_err;
> > + }
> > +
> > + if (chip->id< tsl2572) {
> > + if (!(status& TSL2X7X_STA_ADC_VALID)) {
> > + err_cnt++;
> > + if (err_cnt> CONSECUTIVE_RETRIES) {
> > + dev_err(&chip->client->dev,
> > + "%s: Consec. retries exceeded\n", __func__);
> > + goto prox_poll_err;
> > + }
> > + goto try_again;
> > + }
> > + } else {
> > + if (!(status& TSL2X7X_STA_PRX_VALID)) {
> > + err_cnt++;
> > + if (err_cnt> CONSECUTIVE_RETRIES) {
> > + dev_err(&chip->client->dev,
> > + "%s: Consec. retries exceeded\n", __func__);
> > + goto prox_poll_err;
> > + }
> > + goto try_again;
> > + }
> > + }
> > +
> > + for (i = 0; i< 2; i++) {
> > + ret = tsl2x7x_i2c_read(chip->client,
> > + (TSL2X7X_CMD_REG |
> > + (TSL2X7X_PRX_LO + i)),&chdata[i]);
> > + if (ret< 0)
> > + goto prox_poll_err;
> > + }
> > +
> > + chip->prox_cur_info.prox_data = (chdata[1]<<8)|chdata[0];
> > + if (chip->prox_cur_info.prox_data == 0)
> > + goto try_again;
> > +
> > + if (chip->prox_cur_info.prox_data>=
> > + chip->tsl2x7x_settings.prox_thres_high)
> > + chip->prox_cur_info.prox_event = 1;
> > + else
> > + chip->prox_cur_info.prox_event = 0;
> So this is manually polling the event signal. I'd argue that this is a
> job for userspace
> if the device isn't doing it hardware (or the interrupt signal is
> connected).
> > +
> > + mutex_unlock(&chip->prox_mutex);
> > + return chip->prox_cur_info.prox_event;
> > +
> > +prox_poll_err:
> > + mutex_unlock(&chip->prox_mutex);
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Provides initial operational parameter defaults.
> > + * These defaults may be changed through the device's sysfs files.
> > + */
> > +static void tsl2x7x_defaults(struct tsl2X7X_chip *chip)
> > +{
> > + /* If Operational settings defined elsewhere.. */
> > + if (chip->pdata&& chip->pdata->platform_default_settings != 0)
> > + memcpy(&(chip->tsl2x7x_settings),
> > + chip->pdata->platform_default_settings,
> > + sizeof(tsl2x7x_default_settings));
> > + else
> > + memcpy(&(chip->tsl2x7x_settings),
> > + &tsl2x7x_default_settings,
> > + sizeof(tsl2x7x_default_settings));
> > +
> > + /* Load up the proper lux table. */
> > + if (chip->pdata&& chip->pdata->platform_lux_table[0].ratio != 0)
> > + memcpy(chip->tsl2x7x_device_lux,
> > + chip->pdata->platform_lux_table,
> > + sizeof(chip->pdata->platform_lux_table));
> > + else
> > + memcpy(chip->tsl2x7x_device_lux,
> > + (struct tsl2x7x_lux *)tsl2x7x_default_lux_table_group[chip->id],
> > + MAX_DEFAULT_TABLE_BYTES);
> > +
> > +}
> > +
> > +/*
> > + * Obtain single reading and calculate the als_gain_trim
> > + * (later used to derive actual lux).
> > + * Return updated gain_trim value.
> > + */
> > +static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + u8 reg_val;
> > + int gain_trim_val;
> > + int ret;
> > + int lux_val;
> > +
> > + ret = i2c_smbus_write_byte(chip->client,
> > + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed to write CNTRL register, ret=%d\n",
> > + __func__, ret);
> > + return ret;
> > + }
> > +
> > + reg_val = i2c_smbus_read_byte(chip->client);
> > + if ((reg_val& (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON))
> > + != (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed: ADC not enabled\n", __func__);
> > + return -1;
> > + }
> > +
> > + ret = i2c_smbus_write_byte(chip->client,
> > + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed to write ctrl reg: ret=%d\n",
> > + __func__, ret);
> > + return ret;
> > + }
> > +
> > + reg_val = i2c_smbus_read_byte(chip->client);
> > + if ((reg_val& TSL2X7X_STA_ADC_VALID) != TSL2X7X_STA_ADC_VALID) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed: STATUS - ADC not valid.\n", __func__);
> > + return -ENODATA;
> > + }
> > +
> > + lux_val = tsl2x7x_get_lux(indio_dev);
> > + if (lux_val< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed to get lux\n", __func__);
> > + return lux_val;
> > + }
> > +
> > + gain_trim_val = (((chip->tsl2x7x_settings.als_cal_target)
> > + * chip->tsl2x7x_settings.als_gain_trim) / lux_val);
> > + if ((gain_trim_val< 250) || (gain_trim_val> 4000))
> > + return -ERANGE;
> > +
> > + chip->tsl2x7x_settings.als_gain_trim = gain_trim_val;
> > + dev_info(&chip->client->dev,
> > + "%s als_calibrate completed\n", chip->client->name);
> > +
> > + return (int) gain_trim_val;
> > +}
> > +
> > +/*
> > + * Turn the device on.
> > + * Configuration must be set before calling this function.
> > + */
> > +static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> > +{
> > + int i;
> > + int ret = 0;
> > + u8 *dev_reg;
> > + u8 utmp;
> > + int als_count;
> > + int als_time;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + u8 reg_val = 0;
> > +
> > + if (chip->pdata&& chip->pdata->power_on)
> > + chip->pdata->power_on(indio_dev);
> > +
> > + /* Non calculated parameters */
> > + chip->tsl2x7x_config[TSL2X7X_PRX_TIME] =
> > + chip->tsl2x7x_settings.prx_time;
> > + chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] =
> > + chip->tsl2x7x_settings.wait_time;
> > + chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] =
> > + chip->tsl2x7x_settings.prox_config;
> > +
> > + chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] =
> > + (chip->tsl2x7x_settings.als_thresh_low)& 0xFF;
> > + chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHHI] =
> > + (chip->tsl2x7x_settings.als_thresh_low>> 8)& 0xFF;
> > + chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHLO] =
> > + (chip->tsl2x7x_settings.als_thresh_high)& 0xFF;
> > + chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHHI] =
> > + (chip->tsl2x7x_settings.als_thresh_high>> 8)& 0xFF;
> > + chip->tsl2x7x_config[TSL2X7X_PERSISTENCE] =
> > + chip->tsl2x7x_settings.als_persistence;
> > +
> > + chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] =
> > + chip->tsl2x7x_settings.prox_pulse_count;
> > + chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] =
> > + chip->tsl2x7x_settings.prox_thres_low;
> > + chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] =
> > + chip->tsl2x7x_settings.prox_thres_high;
> > +
> > + /* and make sure we're not already on */
> > + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
> > + /* if forcing a register update - turn off, then on */
> > + dev_info(&chip->client->dev, "device is already enabled\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* determine als integration regster */
> > + als_count = (chip->tsl2x7x_settings.als_time * 100 + 135) / 270;
> > + if (als_count == 0)
> > + als_count = 1; /* ensure at least one cycle */
> > +
> > + /* convert back to time (encompasses overrides) */
> > + als_time = (als_count * 27 + 5) / 10;
> > + chip->tsl2x7x_config[TSL2X7X_ALS_TIME] = 256 - als_count;
> > +
> > + /* Set the gain based on tsl2x7x_settings struct */
> > + chip->tsl2x7x_config[TSL2X7X_GAIN] =
> > + (chip->tsl2x7x_settings.als_gain |
> > + (TSL2X7X_mA100 | TSL2X7X_DIODE1)
> > + | ((chip->tsl2x7x_settings.prox_gain)<< 2));
> > +
> > + /* set chip struct re scaling and saturation */
> > + chip->als_saturation = als_count * 922; /* 90% of full scale */
> > + chip->als_time_scale = (als_time + 25) / 50;
> > +
> > + /* TSL2X7X Specific power-on / adc enable sequence
> > + * Power on the device 1st. */
> > + utmp = TSL2X7X_CNTL_PWR_ON;
> > + ret = i2c_smbus_write_byte_data(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed on CNTRL reg.\n", __func__);
> > + return -1;
> > + }
> > +
> > + /* Use the following shadow copy for our delay before enabling ADC.
> > + * Write all the registers. */
> > + for (i = 0, dev_reg = chip->tsl2x7x_config;
> > + i< TSL2X7X_MAX_CONFIG_REG; i++) {
> > + ret = i2c_smbus_write_byte_data(chip->client,
> > + TSL2X7X_CMD_REG + i, *dev_reg++);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed on write to reg %d.\n", __func__, i);
> > + return ret;
> > + }
> > + }
> > +
> > + udelay(3000); /* Power-on settling time */
> > +
> > + /* NOW enable the ADC
> > + * initialize the desired mode of operation */
> > + utmp = TSL2X7X_CNTL_PWR_ON |
> > + TSL2X7X_CNTL_ADC_ENBL |
> > + TSL2X7X_CNTL_PROX_DET_ENBL;
> > + ret = i2c_smbus_write_byte_data(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed on 2nd CTRL reg.\n", __func__);
> > + return ret;
> > + }
> > +
> > + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
> > +
> > + if (chip->tsl2x7x_settings.interrupts_en != 0) {
> > + dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
> > +
> > + reg_val = TSL2X7X_CNTL_PWR_ON |
> TSL2X7X_CNTL_ADC_ENBL;
> > + if ((chip->tsl2x7x_settings.interrupts_en == 0x20) ||
> > + (chip->tsl2x7x_settings.interrupts_en == 0x30))
> > + reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
> > +
> > + reg_val |= chip->tsl2x7x_settings.interrupts_en;
> > + ret = i2c_smbus_write_byte_data(chip->client,
> > + (TSL2X7X_CMD_REG | TSL2X7X_CNTRL), reg_val);
> > + if (ret< 0)
> > + dev_err(&chip->client->dev,
> > + "%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
> > + __func__);
> > +
> > + /* Clear out any initial interrupts */
> > + ret = i2c_smbus_write_byte(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
> > + TSL2X7X_CMD_PROXALS_INT_CLR);
> > + if (ret< 0) {
> > + dev_err(&chip->client->dev,
> > + "%s: failed in tsl2x7x_chip_on\n",
> > + __func__);
> > + return ret;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
> > +{
> > + int ret;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + /* turn device off */
> > + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
> > +
> > + ret = i2c_smbus_write_byte_data(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
> > +
> > + if (chip->pdata&& chip->pdata->power_off)
> > + chip->pdata->power_off(chip->client);
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Proximity calibration helper function
> > + * runs through a collection of data samples,
> > + * sets the min, max, mean, and std dev.
> > + */
> > +static
> > +void tsl2x7x_prox_calculate(u16 *data, int length, struct prox_stat *statP)
> > +{
> > + int i;
> > + int min, max, sum, mean;
> > + unsigned long stddev;
> > + int tmp;
> > +
> > + if (length == 0)
> > + length = 1;
> > +
> > + sum = 0;
> > + min = INT_MAX;
> > + max = INT_MIN;
> > + for (i = 0; i< length; i++) {
> > + sum += data[i];
> avoid using min as a variable name (as it's also an appropriate function)
> _min = MIN(data[i], _min); saves you a line of code.
> > + if (data[i]< min)
> > + min = data[i];
> > + if (data[i]> max)
> > + max = data[i];
> > + }
> > + mean = sum/length;
> > + statP->min = min;
> > + statP->max = max;
> > + statP->mean = mean;
> > +
> > + sum = 0;
> > + for (i = 0; i< length; i++) {
> > + tmp = data[i]-mean;
> > + sum += tmp * tmp;
> > + }
> > + stddev = int_sqrt((long)sum)/length;
> > + statP->stddev = stddev;
> > +}
> > +
> > +/**
> > + * Proximity calibration - collects a number of samples,
> > + * calculates a standard deviation based on the samples, and
> > + * sets the threshold accordingly.
> > + */
> > +static void tsl2x7x_prox_cal(struct iio_dev *indio_dev)
> > +{
> > + u16 prox_history[MAX_SAMPLES_CAL+1];
> spaces around that +
> > + int i;
> > + struct prox_stat prox_stat_data[2];
> > + struct prox_stat *calP;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + u8 tmp_irq_settings;
> > + u8 current_state = chip->tsl2x7x_chip_status;
> > +
> > + if (chip->tsl2x7x_settings.prox_max_samples_cal> MAX_SAMPLES_CAL)
> {
> > + dev_err(&chip->client->dev,
> > + "%s: max prox samples cal is too big: %d\n",
> > + __func__, chip-
> >tsl2x7x_settings.prox_max_samples_cal);
> > + chip->tsl2x7x_settings.prox_max_samples_cal =
> MAX_SAMPLES_CAL;
> > + }
> > +
> > + /* have to stop to change settings */
> > + tsl2x7x_chip_off(indio_dev);
> > +
> > + /* Enable proximity detection save just in case prox not wanted yet*/
> > + tmp_irq_settings = chip->tsl2x7x_settings.interrupts_en;
> > + chip->tsl2x7x_settings.interrupts_en |=
> TSL2X7X_CNTL_PROX_INT_ENBL;
> > +
> > + /*turn on device if not already on*/
> > + tsl2x7x_chip_on(indio_dev);
> > +
> > + /*gather the samples*/
> > + for (i = 0; i< chip->tsl2x7x_settings.prox_max_samples_cal; i++) {
> > + mdelay(15);
> > + tsl2x7x_prox_poll(indio_dev);
> > + prox_history[i] = chip->prox_cur_info.prox_data;
> > + dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
> > + i, chip->prox_cur_info.prox_data);
> > + }
> > +
> > + tsl2x7x_chip_off(indio_dev);
> > + calP =&prox_stat_data[PROX_STAT_CAL];
> > + tsl2x7x_prox_calculate(prox_history,
> > + chip->tsl2x7x_settings.prox_max_samples_cal, calP);
> > + chip->tsl2x7x_settings.prox_thres_high = (calP->max<< 1) - calP-
> >mean;
> > +
> > + dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
> > + calP->min, calP->mean, calP->max);
> > + dev_info(&chip->client->dev,
> > + "%s proximity threshold set to %d\n",
> > + chip->client->name, chip->tsl2x7x_settings.prox_thres_high);
> > +
> > + /* back to the way they were */
> > + chip->tsl2x7x_settings.interrupts_en = tmp_irq_settings;
> > + if (current_state == TSL2X7X_CHIP_WORKING)
> > + tsl2x7x_chip_on(indio_dev);
> > +}
> > +
> > +static ssize_t tsl2x7x_power_state_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + return snprintf(buf, PAGE_SIZE, "%d\n", chip->tsl2x7x_chip_status);
> > +}
> > +
> > +static ssize_t tsl2x7x_power_state_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + bool value;
> > +
> > + if (strtobool(buf,&value))
> > + return -EINVAL;
> > +
> > + if (!value)
> > + tsl2x7x_chip_off(indio_dev);
> > + else
> > + tsl2x7x_chip_on(indio_dev);
> > +
> > + return len;
> > +}
> > +
> > +static ssize_t tsl2x7x_gain_available_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + if (chip->id> tsl2771)
> > + return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128");
> > + else
> > + return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120");
> > +}
> > +
> > +static ssize_t tsl2x7x_prox_gain_available_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + return snprintf(buf, PAGE_SIZE, "%s\n", "1 2 4 8");
> > +}
> > +
> > +static ssize_t tsl2x7x_als_time_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + return snprintf(buf, PAGE_SIZE, "%d\n",
> > + chip->tsl2x7x_settings.als_time);
> > +}
> > +
> > +static ssize_t tsl2x7x_als_time_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + unsigned long value;
> > +
> > + if (kstrtoul(buf, 0,&value))
> > + return -EINVAL;
> > +
> > + if ((value< 50) || (value> 650))
> > + return -EINVAL;
> > +
> > + if (value % 50)
> > + return -EINVAL;
> > +
> > + chip->tsl2x7x_settings.als_time = value;
> > +
> > + return len;
> > +}
> > +
> > +static IIO_CONST_ATTR(illuminance0_integration_time_available,
> > + "50 100 150 200 250 300 350 400 450 500 550 600 650");
> > +
> > +static ssize_t tsl2x7x_als_cal_target_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + return snprintf(buf, PAGE_SIZE, "%d\n",
> > + chip->tsl2x7x_settings.als_cal_target);
> > +}
> > +
> > +static ssize_t tsl2x7x_als_cal_target_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + unsigned long value;
> > +
> > + if (kstrtoul(buf, 0,&value))
> > + return -EINVAL;
> > +
> > + if (value)
> > + chip->tsl2x7x_settings.als_cal_target = value;
> > +
> > + return len;
> > +}
> > +
> > +/* sampling_frequency AKA persistence in data sheet */
> > +static ssize_t tsl2x7x_als_persistence_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + return snprintf(buf, PAGE_SIZE, "%d\n",
> > + chip->tsl2x7x_settings.als_persistence);
> > +}
> > +
> > +static ssize_t tsl2x7x_als_persistence_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + unsigned long value;
> > +
> > + if (kstrtoul(buf, 0,&value))
> > + return -EINVAL;
> > +
> > + chip->tsl2x7x_settings.als_persistence = value;
> > +
> > + return len;
> > +}
> > +
> > +static IIO_CONST_ATTR(sampling_frequency_available,
> > + "0x00 - 0xFF (0 - 255)");
> > +
> > +static ssize_t tsl2x7x_do_calibrate(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + bool value;
> > +
> > + if (strtobool(buf,&value))
> > + return -EINVAL;
> > +
> > + if (value)
> > + tsl2x7x_als_calibrate(indio_dev);
> > +
> > + return len;
> > +}
> > +
> > +static ssize_t tsl2x7x_luxtable_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int i;
> > + int offset = 0;
> > +
> > + i = 0;
> Set i at the declaration above.
> > + while (i< (TSL2X7X_MAX_LUX_TABLE_SIZE * 3)) {
> > + offset += snprintf(buf + offset, PAGE_SIZE, "%d,%d,%d,",
> > + chip->tsl2x7x_device_lux[i].ratio,
> > + chip->tsl2x7x_device_lux[i].ch0,
> > + chip->tsl2x7x_device_lux[i].ch1);
> > + if (chip->tsl2x7x_device_lux[i].ratio == 0) {
> > + /* We just printed the first "0" entry.
> > + * Now get rid of the extra "," and break. */
> > + offset--;
> > + break;
> > + }
> > + i++;
> > + }
> > +
> > + offset += snprintf(buf + offset, PAGE_SIZE, "\n");
> > + return offset;
> > +}
> > +
> > +static ssize_t tsl2x7x_luxtable_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int value[ARRAY_SIZE(chip->tsl2x7x_device_lux)*3 + 1];
> > + int n;
> > +
> > + get_options(buf, ARRAY_SIZE(value), value);
> > +
> > + /* We now have an array of ints starting at value[1], and
> > + * enumerated by value[0].
> > + * We expect each group of three ints is one table entry,
> > + * and the last table entry is all 0.
> > + */
> > + n = value[0];
> > + if ((n % 3) || n< 6 ||
> > + n> ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
> > + dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
> > + return -EINVAL;
> > + }
> > +
> > + if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
> > + dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
> > + return -EINVAL;
> > + }
> > +
> > + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING)
> > + tsl2x7x_chip_off(indio_dev);
> > +
> > + /* Zero out the table */
> > + memset(chip->tsl2x7x_device_lux, 0, sizeof(chip->tsl2x7x_device_lux));
> > + memcpy(chip->tsl2x7x_device_lux,&value[1], (value[0] * 4));
> > +
> > + return len;
> > +}
> > +
> > +static ssize_t tsl2x7x_do_prox_calibrate(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + bool value;
> > +
> > + if (strtobool(buf,&value))
> > + return -EINVAL;
> > +
> > + if (value)
> > + tsl2x7x_prox_cal(indio_dev);
> > +
> > + return len;
> > +}
> > +
> > +static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
> > + u64 event_code)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int ret;
> > +
> > + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_LIGHT)
> > + ret = !!(chip->tsl2x7x_settings.interrupts_en& 0x10);
> > + else
> > + ret = !!(chip->tsl2x7x_settings.interrupts_en& 0x20);
> > +
> > + return ret;
> > +}
> > +
> > +static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
> > + u64 event_code,
> > + int val)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_LIGHT)
> {
> > + if (val)
> > + chip->tsl2x7x_settings.interrupts_en |= 0x10;
> > + else
> > + chip->tsl2x7x_settings.interrupts_en&= 0x20;
> > + } else {
> > + if (val)
> > + chip->tsl2x7x_settings.interrupts_en |= 0x20;
> > + else
> > + chip->tsl2x7x_settings.interrupts_en&= 0x10;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tsl2x7x_write_thresh(struct iio_dev *indio_dev,
> > + u64 event_code,
> > + int val)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_LIGHT)
> {
> > + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
> > + case IIO_EV_DIR_RISING:
> > + chip->tsl2x7x_settings.als_thresh_high = val;
> > + break;
> > + case IIO_EV_DIR_FALLING:
> > + chip->tsl2x7x_settings.als_thresh_low = val;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + } else {
> > + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
> > + case IIO_EV_DIR_RISING:
> > + chip->tsl2x7x_settings.prox_thres_high = val;
> > + break;
> > + case IIO_EV_DIR_FALLING:
> > + chip->tsl2x7x_settings.prox_thres_low = val;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tsl2x7x_read_thresh(struct iio_dev *indio_dev,
> > + u64 event_code,
> > + int *val)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_LIGHT)
> {
> > + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
> > + case IIO_EV_DIR_RISING:
> > + *val = chip->tsl2x7x_settings.als_thresh_high;
> > + break;
> > + case IIO_EV_DIR_FALLING:
> > + *val = chip->tsl2x7x_settings.als_thresh_low;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + } else {
> > + switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
> > + case IIO_EV_DIR_RISING:
> > + *val = chip->tsl2x7x_settings.prox_thres_high;
> > + break;
> > + case IIO_EV_DIR_FALLING:
> > + *val = chip->tsl2x7x_settings.prox_thres_low;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val,
> > + int *val2,
> > + long mask)
> > +{
> > + int ret = -EINVAL;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + switch (mask) {
> > + case 0:
> > + switch (chan->type) {
> > + case IIO_LIGHT:
> > + tsl2x7x_get_lux(indio_dev);
> > + if (chan->processed_val)
> > + *val = chip->als_cur_info.lux;
> > + else
> > + *val = (((chip->als_cur_info.als_ch0<< 16) |
> > + chip->als_cur_info.als_ch1));
> Why have a processed read back and a raw readback?
> > + ret = IIO_VAL_INT;
> > + break;
> > + case IIO_PROXIMITY:
> > + tsl2x7x_prox_poll(indio_dev);
> > + if (chan->processed_val)
> Hmm.. this is uggly. We effectively have polling of an event status.
> Normally
> I'd expect the event to only occur as a an IIO event rather than being
> readable like
> this...
> > + *val = chip->prox_cur_info.prox_event;
> > + else
> > + *val = chip->prox_cur_info.prox_data;
> > + ret = IIO_VAL_INT;
> > + break;
> > + default:
> > + return -EINVAL;
> > + break;
> > + }
> > + break;
> > + case IIO_CHAN_INFO_CALIBSCALE:
> > + if (chan->type == IIO_LIGHT)
> > + *val =
> > + tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain];
> > + else
> > + *val =
> > + tsl2X7X_prx_gainadj[chip->tsl2x7x_settings.prox_gain];
> > + ret = IIO_VAL_INT;
> > + break;
> > + case IIO_CHAN_INFO_CALIBBIAS:
> > + *val = chip->tsl2x7x_settings.als_gain_trim;
> > + ret = IIO_VAL_INT;
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int val,
> > + int val2,
> > + long mask)
> > +{
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_CALIBSCALE:
> > + if (chan->type == IIO_LIGHT) {
> > + switch (val) {
> > + case 1:
> > + chip->tsl2x7x_settings.als_gain = 0;
> > + break;
> > + case 8:
> > + chip->tsl2x7x_settings.als_gain = 1;
> > + break;
> > + case 16:
> > + chip->tsl2x7x_settings.als_gain = 2;
> > + break;
> > + case 120:
> > + if (chip->id> tsl2771)
> > + return -EINVAL;
> > + chip->tsl2x7x_settings.als_gain = 3;
> > + break;
> > + case 128:
> > + if (chip->id< tsl2572)
> > + return -EINVAL;
> > + chip->tsl2x7x_settings.als_gain = 3;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + } else {
> > + switch (val) {
> > + case 1:
> > + chip->tsl2x7x_settings.prox_gain = 0;
> > + break;
> > + case 2:
> > + chip->tsl2x7x_settings.prox_gain = 1;
> > + break;
> > + case 4:
> > + chip->tsl2x7x_settings.prox_gain = 2;
> > + break;
> > + case 8:
> > + chip->tsl2x7x_settings.prox_gain = 3;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + }
> > + break;
> > + case IIO_CHAN_INFO_CALIBBIAS:
> > + chip->tsl2x7x_settings.als_gain_trim = val;
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
> > + tsl2x7x_power_state_show, tsl2x7x_power_state_store);
> > +
> > +static DEVICE_ATTR(proximity_calibscale_available, S_IRUGO,
> > + tsl2x7x_prox_gain_available_show, NULL);
> > +
> > +static DEVICE_ATTR(illuminance0_calibscale_available, S_IRUGO,
> > + tsl2x7x_gain_available_show, NULL);
> > +
> > +static DEVICE_ATTR(illuminance0_integration_time, S_IRUGO | S_IWUSR,
> > + tsl2x7x_als_time_show, tsl2x7x_als_time_store);
> > +
> > +static DEVICE_ATTR(illuminance0_target_input, S_IRUGO | S_IWUSR,
> > + tsl2x7x_als_cal_target_show, tsl2x7x_als_cal_target_store);
> > +
> > +static DEVICE_ATTR(illuminance0_calibrate, S_IWUSR, NULL,
> > + tsl2x7x_do_calibrate);
> > +
> > +static DEVICE_ATTR(proximity_calibrate, S_IWUSR, NULL,
> > + tsl2x7x_do_prox_calibrate);
> > +
> > +static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR,
> > + tsl2x7x_luxtable_show, tsl2x7x_luxtable_store);
> > +
> > +static DEVICE_ATTR(sampling_frequency, S_IRUGO | S_IWUSR,
> > + tsl2x7x_als_persistence_show, tsl2x7x_als_persistence_store);
> > +
> > +/* Use the default register values to identify the Taos device */
> > +static int tsl2x7x_device_id(unsigned char *id, int target)
> > +{
> > + switch (target) {
> > + case tsl2571:
> > + case tsl2671:
> > + case tsl2771:
> > + return ((*id& 0xf0) == TRITON_ID);
> > + break;
> > + case tmd2671:
> > + case tmd2771:
> > + return ((*id& 0xf0) == HALIBUT_ID);
> > + break;
> > + case tsl2572:
> > + case tsl2672:
> > + case tmd2672:
> > + case tsl2772:
> > + case tmd2772:
> > + return ((*id& 0xf0) == SWORDFISH_ID);
> > + break;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +/*
> > + * Interrupt Event Handler */
> > +static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
> > +{
> > + struct iio_dev *indio_dev = private;
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + s64 timestamp = iio_get_time_ns();
> > + int ret;
> > + int value;
> > +
> > + value = i2c_smbus_read_byte_data(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_STATUS);
> > +
> > + /* What type of interrupt do we need to process */
> > + if (value& TSL2X7X_STA_PRX_INTR) {
> > + tsl2x7x_prox_poll(indio_dev);
> > + iio_push_event(indio_dev,
> > + IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
> > + 0,
> > + IIO_EV_TYPE_THRESH,
> > + IIO_EV_DIR_EITHER),
> > + timestamp);
> > + }
> > +
> > + if (value& TSL2X7X_STA_ALS_INTR) {
> > + tsl2x7x_get_lux(indio_dev);
> why the get value? No real guarantee you'll get the one that caused the
> event as far as I can see.
> > + iio_push_event(indio_dev,
> > + IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
> > + 0,
> > + IIO_EV_TYPE_THRESH,
> > + IIO_EV_DIR_EITHER),
> > + timestamp);
> > + }
> > + /* Clear interrupt now that we have the status */
> > + ret = i2c_smbus_write_byte(chip->client,
> > + TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
> > + TSL2X7X_CMD_PROXALS_INT_CLR);
> > + if (ret< 0)
> > + dev_err(&chip->client->dev,
> > + "%s: Failed to clear irq from event handler. err = %d\n",
> > + __func__, ret);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static struct attribute *tsl2x7x_ALS_device_attrs[] = {
> > + &dev_attr_power_state.attr,
> > + &dev_attr_illuminance0_calibscale_available.attr,
> > + &dev_attr_illuminance0_integration_time.attr,
> > + &iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
> > + &dev_attr_illuminance0_target_input.attr,
> > + &dev_attr_illuminance0_calibrate.attr,
> > + &dev_attr_illuminance0_lux_table.attr,
> > + &dev_attr_sampling_frequency.attr,
> > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > + NULL
> > +};
> > +
> > +static struct attribute *tsl2x7x_PRX_device_attrs[] = {
> > + &dev_attr_power_state.attr,
> > + &dev_attr_sampling_frequency.attr,
> > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > + &dev_attr_proximity_calibrate.attr,
> > + NULL
> > +};
> > +
> > +static struct attribute *tsl2x7x_ALSPRX_device_attrs[] = {
> > + &dev_attr_power_state.attr,
> > + &dev_attr_illuminance0_calibscale_available.attr,
> > + &dev_attr_illuminance0_integration_time.attr,
> > + &iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
> > + &dev_attr_illuminance0_target_input.attr,
> > + &dev_attr_illuminance0_calibrate.attr,
> > + &dev_attr_illuminance0_lux_table.attr,
> > + &dev_attr_sampling_frequency.attr,
> > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > + &dev_attr_proximity_calibrate.attr,
> > + NULL
> > +};
> > +
> > +static struct attribute *tsl2x7x_PRX2_device_attrs[] = {
> > + &dev_attr_power_state.attr,
> > + &dev_attr_sampling_frequency.attr,
> > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > + &dev_attr_proximity_calibrate.attr,
> > + &dev_attr_proximity_calibscale_available.attr,
> > + NULL
> > +};
> > +
> > +static struct attribute *tsl2x7x_ALSPRX2_device_attrs[] = {
> > + &dev_attr_power_state.attr,
> > + &dev_attr_illuminance0_calibscale_available.attr,
> > + &dev_attr_illuminance0_integration_time.attr,
> > + &iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
> > + &dev_attr_illuminance0_target_input.attr,
> > + &dev_attr_illuminance0_calibrate.attr,
> > + &dev_attr_illuminance0_lux_table.attr,
> > + &dev_attr_sampling_frequency.attr,
> > + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> > + &dev_attr_proximity_calibrate.attr,
> > + &dev_attr_proximity_calibscale_available.attr,
> > + NULL
> > +};
> > +
> > +static const struct attribute_group tsl2X7X_device_attr_group_tbl[] = {
> > + [ALS] = {
> > + .attrs = tsl2x7x_ALS_device_attrs,
> > + },
> > + [PRX] = {
> > + .attrs = tsl2x7x_PRX_device_attrs,
> > + },
> > + [ALSPRX] = {
> > + .attrs = tsl2x7x_ALSPRX_device_attrs,
> > + },
> > + [PRX2] = {
> > + .attrs = tsl2x7x_PRX2_device_attrs,
> > + },
> > + [ALSPRX2] = {
> > + .attrs = tsl2x7x_ALSPRX2_device_attrs,
> > + },
> > +};
> > +
> > +static const struct iio_info tsl2X7X_device_info[] = {
> > + [ALS] = {
> > + .attrs =&tsl2X7X_device_attr_group_tbl[ALS],
> > + .driver_module = THIS_MODULE,
> > + .read_raw =&tsl2x7x_read_raw,
> > + .write_raw =&tsl2x7x_write_raw,
> > + .read_event_value =&tsl2x7x_read_thresh,
> > + .write_event_value =&tsl2x7x_write_thresh,
> > + .read_event_config =&tsl2x7x_read_interrupt_config,
> > + .write_event_config =&tsl2x7x_write_interrupt_config,
> > + },
> > + [PRX] = {
> > + .attrs =&tsl2X7X_device_attr_group_tbl[PRX],
> > + .driver_module = THIS_MODULE,
> > + .read_raw =&tsl2x7x_read_raw,
> > + .write_raw =&tsl2x7x_write_raw,
> > + .read_event_value =&tsl2x7x_read_thresh,
> > + .write_event_value =&tsl2x7x_write_thresh,
> > + .read_event_config =&tsl2x7x_read_interrupt_config,
> > + .write_event_config =&tsl2x7x_write_interrupt_config,
> > + },
> > + [ALSPRX] = {
> > + .attrs =&tsl2X7X_device_attr_group_tbl[ALSPRX],
> > + .driver_module = THIS_MODULE,
> > + .read_raw =&tsl2x7x_read_raw,
> > + .write_raw =&tsl2x7x_write_raw,
> > + .read_event_value =&tsl2x7x_read_thresh,
> > + .write_event_value =&tsl2x7x_write_thresh,
> > + .read_event_config =&tsl2x7x_read_interrupt_config,
> > + .write_event_config =&tsl2x7x_write_interrupt_config,
> > + },
> > + [PRX2] = {
> > + .attrs =&tsl2X7X_device_attr_group_tbl[PRX2],
> > + .driver_module = THIS_MODULE,
> > + .read_raw =&tsl2x7x_read_raw,
> > + .write_raw =&tsl2x7x_write_raw,
> > + .read_event_value =&tsl2x7x_read_thresh,
> > + .write_event_value =&tsl2x7x_write_thresh,
> > + .read_event_config =&tsl2x7x_read_interrupt_config,
> > + .write_event_config =&tsl2x7x_write_interrupt_config,
> > + },
> > + [ALSPRX2] = {
> > + .attrs =&tsl2X7X_device_attr_group_tbl[ALSPRX2],
> > + .driver_module = THIS_MODULE,
> > + .read_raw =&tsl2x7x_read_raw,
> > + .write_raw =&tsl2x7x_write_raw,
> > + .read_event_value =&tsl2x7x_read_thresh,
> > + .write_event_value =&tsl2x7x_write_thresh,
> > + .read_event_config =&tsl2x7x_read_interrupt_config,
> > + .write_event_config =&tsl2x7x_write_interrupt_config,
> > + },
> > +};
> > +
> > +static const struct tsl2x7x_chip_info tsl2x7x_chip_info_tbl[] = {
> > + [ALS] = {
> > + .channel = {
> > + [0] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [1] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask =
> > +
> IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
> > +
> IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + },
> > + .num_channels = 2,
> > + .info =&tsl2X7X_device_info[ALS],
> > + },
> > + [PRX] = {
> > + .channel = {
> > + [0] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [1] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + },
> > + .num_channels = 2,
> > + .info =&tsl2X7X_device_info[PRX],
> > + },
> > + [ALSPRX] = {
> > + .channel = {
> > + [0] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [1] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask =
> > +
> IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
> > +
> IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + [2] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [3] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 0,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + },
> > + .num_channels = 4,
> > + .info =&tsl2X7X_device_info[ALSPRX],
> > + },
> > + [PRX2] = {
> > + .channel = {
> > + [0] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [1] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask =
> > +
> IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + },
> > + .num_channels = 2,
> > + .info =&tsl2X7X_device_info[PRX2],
> > + },
> > + [ALSPRX2] = {
> > + .channel = {
> > + [0] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [1] = {
> > + .type = IIO_LIGHT,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask =
> > +
> IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
> > +
> IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + [2] = {
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .processed_val = 1,
> > + },
> > + [3] = {
> I'm more than a little confused here. There are only 2 actually
> channels? If so I don't
> see why we have 4 channels here...
> > + .type = IIO_PROXIMITY,
> > + .indexed = 1,
> > + .channel = 0,
> > + .info_mask =
> > +
> IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
> > + .event_mask = TSL2X7X_EVENT_MASK
> > + },
> > + },
> > + .num_channels = 4,
> > + .info =&tsl2X7X_device_info[ALSPRX2],
> > + },
> > +};
> > +
> > +/*
> > + * Client probe function.
> > + */
> > +static int __devinit tsl2x7x_probe(struct i2c_client *clientp,
> > + const struct i2c_device_id *id)
> > +{
> > + int ret;
> > + unsigned char device_id;
> > + struct iio_dev *indio_dev;
> > + struct tsl2X7X_chip *chip;
> > +
> > + indio_dev = iio_allocate_device(sizeof(*chip));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + chip = iio_priv(indio_dev);
> > + chip->client = clientp;
> > + i2c_set_clientdata(clientp, indio_dev);
> > +
> > + ret = tsl2x7x_i2c_read(chip->client,
> > + TSL2X7X_CHIPID,&device_id);
> > + if (ret< 0)
> > + goto fail1;
> > +
> > + if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
> > + (tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
> > + dev_info(&chip->client->dev,
> > + "i2c device found does not match expected id
> in %s\n",
> > + __func__);
> > + goto fail1;
> > + }
> > +
> > + ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG |
> TSL2X7X_CNTRL));
> > + if (ret< 0) {
> > + dev_err(&clientp->dev, "%s: write to cmd reg failed. err =
> %d\n",
> > + __func__, ret);
> > + goto fail1;
> > + }
> > +
> > + /* ALS and PROX functions can be invoked via user space poll
> > + * or H/W interrupt. If busy return last sample. */
> > + mutex_init(&chip->als_mutex);
> > + mutex_init(&chip->prox_mutex);
> > +
> > + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_UNKNOWN;
> > + chip->pdata = clientp->dev.platform_data;
> > + chip->id = id->driver_data;
> > + chip->chip_info =
> > + &tsl2x7x_chip_info_tbl[device_channel_config[id-
> >driver_data]];
> > +
> > + indio_dev->info = chip->chip_info->info;
> > + indio_dev->dev.parent =&clientp->dev;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->name = chip->client->name;
> > + indio_dev->channels = chip->chip_info->channel;
> > + indio_dev->num_channels = chip->chip_info->num_channels;
> > +
> > + if (clientp->irq) {
> > + ret = request_threaded_irq(clientp->irq,
> > + NULL,
> > + &tsl2x7x_event_handler,
> > + IRQF_TRIGGER_RISING |
> IRQF_ONESHOT,
> > + "TSL2X7X_event",
> > + indio_dev);
> > + if (ret) {
> > + dev_err(&clientp->dev,
> > + "%s: irq request failed", __func__);
> > + goto fail2;
> > + }
> > + }
> > +
> > + /* Load up the defaults */
> > + tsl2x7x_defaults(chip);
> > + /* Make sure the chip is on */
> > + tsl2x7x_chip_on(indio_dev);
> > +
> > + ret = iio_device_register(indio_dev);
> > + if (ret) {
> > + dev_err(&clientp->dev,
> > + "%s: iio registration failed\n", __func__);
> > + goto fail3;
> > + }
> > +
> > + dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
> > +
> > + return 0;
> > +
> > +fail3:
> > + if (clientp->irq)
> > + free_irq(clientp->irq, indio_dev);
> > +fail2:
> > + iio_free_device(indio_dev);
> > +fail1:
> > + kfree(chip);
> double free of chip. It's allocated and managed by the
> iio_allocate_device and iio_free_device calls.
> For that matter, most of the goto fail2's need the iio_free_device call..
> > + return ret;
> > +}
> > +
> > +static int tsl2x7x_suspend(struct device *dev)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int ret = 0;
> > +
> > + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
> > + ret = tsl2x7x_chip_off(indio_dev);
> > + chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
> > + }
> > +
> > + if (chip->pdata&& chip->pdata->platform_power) {
> > + pm_message_t pmm = {PM_EVENT_SUSPEND};
> > + chip->pdata->platform_power(dev, pmm);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int tsl2x7x_resume(struct device *dev)
> > +{
> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > + struct tsl2X7X_chip *chip = iio_priv(indio_dev);
> > + int ret = 0;
> > +
> > + if (chip->pdata&& chip->pdata->platform_power) {
> > + pm_message_t pmm = {PM_EVENT_RESUME};
> > + chip->pdata->platform_power(dev, pmm);
> > + }
> > +
> > + if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_SUSPENDED)
> > + ret = tsl2x7x_chip_on(indio_dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int __devexit tsl2x7x_remove(struct i2c_client *client)
> > +{
> > + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > + struct tsl2X7X_chip *chip = i2c_get_clientdata(client);
> These shouldn't both be true....
> would expect an iio_unregister_device call here.
> > +
> > + tsl2x7x_chip_off(indio_dev);
> > +
> > + if (client->irq)
> > + free_irq(client->irq, chip->client->name);
> > +
> > + iio_free_device(indio_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static struct i2c_device_id tsl2x7x_idtable[] = {
> > + { "tsl2571", tsl2571 },
> > + { "tsl2671", tsl2671 },
> > + { "tmd2671", tmd2671 },
> > + { "tsl2771", tsl2771 },
> > + { "tmd2771", tmd2771 },
> > + { "tsl2572", tsl2572 },
> > + { "tsl2672", tsl2672 },
> > + { "tmd2672", tmd2672 },
> > + { "tsl2772", tsl2772 },
> > + { "tmd2772", tmd2772 },
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, tsl2x7x_idtable);
> > +
> > +static const struct dev_pm_ops tsl2x7x_pm_ops = {
> > + .suspend = tsl2x7x_suspend,
> > + .resume = tsl2x7x_resume,
> > +};
> > +
> > +/* Driver definition */
> > +static struct i2c_driver tsl2x7x_driver = {
> > + .driver = {
> > + .name = "tsl2x7x",
> > + .pm =&tsl2x7x_pm_ops,
> > + },
> > + .id_table = tsl2x7x_idtable,
> > + .probe = tsl2x7x_probe,
> > + .remove = __devexit_p(tsl2x7x_remove),
> > +};
> > +
> > +module_i2c_driver(tsl2x7x_driver);
> > +
> > +MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>");
> > +MODULE_DESCRIPTION("TAOS tsl2x7x ambient and proximity light sensor
> driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/staging/iio/light/tsl2x7x_core.h
> b/drivers/staging/iio/light/tsl2x7x_core.h
> > new file mode 100644
> > index 0000000..663e846
> > --- /dev/null
> > +++ b/drivers/staging/iio/light/tsl2x7x_core.h
> why not just tsl2x7x.h?
> > @@ -0,0 +1,75 @@
> > +/*
> > + * Device driver for monitoring ambient light intensity (lux)
> > + * and proximity (prox) within the TAOS TSL2X7X family of devices.
> > + *
> > + * Copyright (c) 2012, TAOS Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, write to the Free Software Foundation, Inc.,
> > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> > + */
> > +
> > +#ifndef __TSL2X7X_H
> > +#define __TSL2X7X_H
> > +#include<linux/pm.h>
> > +
> > +/* Max number of segments allowable in LUX table */
> > +#define TSL2X7X_MAX_LUX_TABLE_SIZE 9
> > +#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) *
> TSL2X7X_MAX_LUX_TABLE_SIZE)
> > +
> > +struct iio_dev;
> Why the forward declaration of iio_chan_spec?
> > +struct iio_chan_spec;
> > +
> > +struct tsl2x7x_lux {
> > + unsigned int ratio;
> > + unsigned int ch0;
> > + unsigned int ch1;
> > +};
> > +
> > +/* Refer to tsl2x7x_default_settings for member desc. */
> > +struct tsl2x7x_settings {
> > + int als_time;
> > + int als_gain;
> > + int als_gain_trim;
> > + int wait_time;
> > + int prx_time;
> > + int prox_gain;
> > + int prox_config;
> > + int als_cal_target;
> > + u8 interrupts_en;
> > + u8 als_persistence;
> > + int als_thresh_low;
> > + int als_thresh_high;
> > + int prox_thres_low;
> > + int prox_thres_high;
> > + int prox_pulse_count;
> > + int prox_max_samples_cal;
> > +};
> > +
> > +/* struct tsl2x7x_platform_data -
> > + * Platform unique glass and defaults
> > + * Platform PM functions. */
> Would prefer this to be in kernel doc.
> > +struct tsl2X7X_platform_data {
> > + /* Suspend/resume platform cb */
> > + int (*platform_power)(struct device *dev, pm_message_t);
> > + /* The following callback gets called when the device is powered on */
> > + int (*power_on) (struct iio_dev *indio_dev);
> > + /* The following callback gets called when the device is powered off */
> > + int (*power_off) (struct i2c_client *dev);
> > + /* These are the device specific glass coefficents used to
> > + * calculate Lux */
> > + struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
> > + struct tsl2x7x_settings *platform_default_settings;
> > +};
> > +
> > +#endif /* __TSL2X7X_H */
> > --
> > 1.7.4.1
> >

\
 
 \ /
  Last update: 2012-03-27 21:55    [W:0.104 / U:2.696 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site