[lkml]   [2012]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH v3 0/2] Add lcd driver for panels with gpio controlled panel reset
    Changes since v2:
    - Reworked as per comments[1] from Mark Brown.
    - removed the setting of regulator voltage.


    Changes since v1:
    - Fixed gpio leak, added MODULE_DEVICE_TABLE and dev_pm_ops.
    - Changed device tree bindings.

    This patchset adds support for passive panels that use a nRESET line which is
    controlled by a GPIO of the host system and which do not use a serial comamnd
    interface (i2c or spi) or memory-mapped-io interface. Platforms that do not
    require any additional control apart from the nRESET line can use this driver
    for lcd power control.

    The first patch adds driver for passive raster-type lcd's with gpio controlled
    panel reset. It includes support for both dt and non-dt platforms. The second
    patch adds support for using this driver on Origen board.

    Thomas Abraham (2):
    backlight: lcd: add driver for raster-type lcd's with gpio controlled panel reset
    ARM: Exynos: Use lcd power control driver for lcd panel

    .../devicetree/bindings/lcd/lcd-pwrctrl.txt | 36 +++
    arch/arm/mach-exynos/mach-origen.c | 29 +--
    drivers/video/backlight/Kconfig | 7 +
    drivers/video/backlight/Makefile | 1 +
    drivers/video/backlight/lcd_pwrctrl.c | 226 ++++++++++++++++++++
    include/video/lcd_pwrctrl.h | 24 ++
    6 files changed, 300 insertions(+), 23 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/lcd/lcd-pwrctrl.txt
    create mode 100644 drivers/video/backlight/lcd_pwrctrl.c
    create mode 100644 include/video/lcd_pwrctrl.h

     \ /
      Last update: 2012-03-26 10:45    [W:0.019 / U:79.272 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site