lkml.org 
[lkml]   [2012]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result correctly when SRB status is INVALID
From
Date
On Fri, 2012-03-23 at 15:50 +0000, KY Srinivasan wrote:
>
> > -----Original Message-----
> > From: KY Srinivasan
> > Sent: Tuesday, March 20, 2012 10:42 AM
> > To: 'James Bottomley'
> > Cc: gregkh@linuxfoundation.org; linux-kernel@vger.kernel.org;
> > devel@linuxdriverproject.org; ohering@suse.com; hch@infradead.org; linux-
> > scsi@vger.kernel.org
> > Subject: RE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result correctly
> > when SRB status is INVALID
> >
> >
> >
> > > -----Original Message-----
> > > From: James Bottomley [mailto:James.Bottomley@HansenPartnership.com]
> > > Sent: Tuesday, March 20, 2012 4:52 AM
> > > To: KY Srinivasan
> > > Cc: gregkh@linuxfoundation.org; linux-kernel@vger.kernel.org;
> > > devel@linuxdriverproject.org; ohering@suse.com; hch@infradead.org; linux-
> > > scsi@vger.kernel.org
> > > Subject: RE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result
> > correctly
> > > when SRB status is INVALID
> > >
> > > On Mon, 2012-03-19 at 22:52 +0000, KY Srinivasan wrote:
> > > > > > However, keep in mind
> > > > > > that there is no current ETA on when Windows will ship with these
> > changes
> > > -
> > > > > Windows 8
> > > > > > may ship with code where they would return an invalid SRB status, but
> > they
> > > are
> > > > > not
> > > > > > setting the sense code, hence this patch. When the Window host does
> > the
> > > > > "right thing"
> > > > > > I will clean this up, but I don't know when that will be.
> > > > >
> > > > > I thought you just said you'd only just asked them if they could
> > > > > implemented it, in which case no version of windows currently ships with
> > > > > this, correct?
> > > >
> > > > There are some private builds of windows 8 floating around with this change,
> > > where
> > > > they are returning ILLEGAL_REQUEST SRB status without any sense data.
> > >
> > > Sure, but they're not shipped, right ... it's like the test builds we do
> > > for large companies like IBM and HP to try out certain things before
> > > deciding they don't work.
> >
> > They are close to shipping and it is very difficult to get any changes in
> > presently. Furthermore, this is only on windows8; none of the prior
> > versions of windows servers of interest support this. I am starting an effort to
> > get this change into prior windows servers. Once again, it is not clear when
> > these changes will be pushed out.
> >
> >
> > >
> > > > > > More importantly, the second patch in this series where I filter out
> > > > > > the ATA_16 command
> > > > > > on the guest is really important for us. Without that patch on a range
> > > > > > on windows hosts
> > > > > > including the current beta version of windows8 where the host is
> > > > > > returning a generic
> > > > > > error in response to ATA_16 command, we cannot boot many Linux
> > > > > > distros. If you
> > > > > > prefer, I can drop the first patch and re-submit the second patch for
> > > > > > consideration now.
> > > > >
> > > > > I'm not sure about that either. You presumably translate
> > > > > SRB_STATUS_ERROR into DID_TARGET_FAILURE. That should cause the
> > > > > termination of the command with prejudice in exactly the same way as an
> > > > > ILLEGAL_REQUEST sense code would (minus the useful error information),
> > > > > so what's causing the boot failure?
> > > >
> > > > You are right, currently without a proper SRB code, I do a
> > DID_TARGET_FAILURE
> > > and
> > > > this results in the device being offlined and if the device happens to be the
> > root
> > > device,
> > > > we obviously cannot boot. I have seen this problem with sles11 sp2 on a win8
> > > box.
> > >
> > > OK, so this may be the root cause of the problem. DID_TARGET_FAILURE
> > > returns FAILED from scsi_decide_disposition(). This wakes up the error
> > > handler to retry the command and, since the command is never going to
> > > work, this ends up offlining the device. The same thing will happen for
> > > every command with no recovery.
> > >
> > > The question now is, what else returns SRB_STATUS_ERROR? If it's always
> > > for stuff that's unretryable, then the DID_ error is wrong and you
> > > should be returning DID_PASSTHROUGH with an error code and the problem
> > > will be solved. If we can get SRB_STATUS_ERROR on retryable commands,
> > > then you discriminate at the point of failure, not at the point of input
> > > and return DID_TARGET_FAILURE for the ones that should be retried and
> > > DID_PASSTHROUGH + error for the ones that shouldn't. This will ensure
> > > the driver is completely backwards compatible and that it will work
> > > if/when windows properly handles the commands.
> >
> > James, unfortunately based on the current SRB codes I get back from the
> > host, I don't know which commands that failed ought to be retried and which
> > ones should not be; I simply get a single SRB error code for cases where the
> > host filtered the unsupported commands as well as the case where the host
> > supported the command and something failed in the command execution.
> > If there is something I can try in this driver to fix this problem, I am more than
> > happy to try it. If it involves getting changes into the host (win8, win2k8 etc.),
> > I am willing to start a conversation with the relevant teams, but I cannot
> > obviously determine when such changes will ship. However, I do need
> > solution for the problem now.
> >
> > I appreciate your taking the time to help me gravitate towards the
> > correct solution here. Given my constraints, let me know what is the
> > best way forward here.
>
> Ping.

On what? What don't you understand about the above?

The failure path needs to look like the following metacode

case SRB_whatever

if (retryable command)
return DID_TARGET_FAILURE
else
setup sense and error
return DID_PASSTHROUGH

James




\
 
 \ /
  Last update: 2012-03-26 10:19    [W:0.078 / U:1.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site