lkml.org 
[lkml]   [2012]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/2] regulator: Convert pcap-regulator to set_voltage_sel
From
Date
After converting to set_voltage_sel, we can remove the workaroud of getting
the best match voltage for V1. The core will iterate through the whole voltage
table and find the best match for us.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/pcap-regulator.c | 33 ++++++---------------------------
1 files changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c
index a5aab1b..b9666a2 100644
--- a/drivers/regulator/pcap-regulator.c
+++ b/drivers/regulator/pcap-regulator.c
@@ -150,40 +150,19 @@ static struct pcap_regulator vreg_table[] = {
VREG_INFO(SW2S, PCAP_REG_LOWPWR, NA, 20, NA, NA), */
};

-static int pcap_regulator_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
+static int pcap_regulator_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
void *pcap = rdev_get_drvdata(rdev);
- int uV;
- u8 i;

/* the regulator doesn't support voltage switching */
if (vreg->n_voltages == 1)
return -EINVAL;

- for (i = 0; i < vreg->n_voltages; i++) {
- /* For V1 the first is not the best match */
- if (i == 0 && rdev_get_id(rdev) == V1)
- i = 1;
- else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1)
- i = 0;
-
- uV = vreg->voltage_table[i] * 1000;
- if (min_uV <= uV && uV <= max_uV) {
- *selector = i;
- return ezx_pcap_set_bits(pcap, vreg->reg,
- (vreg->n_voltages - 1) << vreg->index,
- i << vreg->index);
- }
-
- if (i == 0 && rdev_get_id(rdev) == V1)
- i = vreg->n_voltages - 1;
- }
-
- /* the requested voltage range is not supported by this regulator */
- return -EINVAL;
+ return ezx_pcap_set_bits(pcap, vreg->reg,
+ (vreg->n_voltages - 1) << vreg->index,
+ selector << vreg->index);
}

static int pcap_regulator_get_voltage(struct regulator_dev *rdev)
@@ -248,7 +227,7 @@ static int pcap_regulator_list_voltage(struct regulator_dev *rdev,

static struct regulator_ops pcap_regulator_ops = {
.list_voltage = pcap_regulator_list_voltage,
- .set_voltage = pcap_regulator_set_voltage,
+ .set_voltage_sel = pcap_regulator_set_voltage_sel,
.get_voltage = pcap_regulator_get_voltage,
.enable = pcap_regulator_enable,
.disable = pcap_regulator_disable,
--
1.7.5.4




\
 
 \ /
  Last update: 2012-03-23 09:51    [W:0.025 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site