lkml.org 
[lkml]   [2012]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/9] omap2: select twl4030 support on boards that need it
Date
From: Arnd Bergmann <arnd@arndb.de>

These three boards unconditionally use the twl4030 driver
from the board-zoom-display.c file. Make sure that the driver
is always there.
We also need to select the I2C core so we are able to build
that driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e20c8ab..0279e9e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -265,6 +265,9 @@ config MACH_OMAP_ZOOM2
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select TWL4030_CORE
+ select MFD_SUPPORT
+ select I2C

config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -275,6 +278,9 @@ config MACH_OMAP_ZOOM3
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select TWL4030_CORE
+ select MFD_SUPPORT
+ select I2C

config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
@@ -316,6 +322,9 @@ config MACH_OMAP_3630SDP
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
+ select TWL4030_CORE
+ select MFD_SUPPORT
+ select I2C

config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
--
1.7.5.4


\
 
 \ /
  Last update: 2012-03-23 18:17    [W:0.129 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site