lkml.org 
[lkml]   [2012]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] qla3xxx: ethernet: Fix bogus interrupt state flag.
Date
From: Santosh Nayak <santoshprasadnayak@gmail.com>

In 'ql_adapter_initialize'
the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0,
which is as good as 'spin_unlock_irq()' (unconditional interrupt
enabling). If this is intended, then for better performance
'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()'
and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index d49f6da..8da3e41 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -3017,7 +3017,6 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
(void __iomem *)port_regs;
u32 delay = 10;
int status = 0;
- unsigned long hw_flags = 0;

if (ql_mii_setup(qdev))
return -1;
@@ -3228,9 +3227,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
if (value & PORT_STATUS_IC)
break;
- spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+ spin_unlock_irq(&qdev->hw_lock);
msleep(500);
- spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+ spin_lock_irq(&qdev->hw_lock);
} while (--delay);

if (delay == 0) {
--
1.7.4.4


\
 
 \ /
  Last update: 2012-03-02 16:13    [W:1.530 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site