lkml.org 
[lkml]   [2012]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] Staging: rtl8187se: r8185b_init.c: Fixed spacing
Date
Removed unnecessary tabs, spaces, and blank lines.

Signed-off-by: Andrew Miller <amiller@amilx.com>
---
drivers/staging/rtl8187se/r8185b_init.c | 721 +++++++++++++++----------------
1 files changed, 351 insertions(+), 370 deletions(-)

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 4b0b830..3c1ca69 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -10,7 +10,7 @@ Abstract:
Major Change History:
When Who What
---------- --------------- -------------------------------
- 2006-11-15 Xiong Created
+ 2006-11-15 Xiong Created

Notes:
This file is ported from RTL8185B Windows driver.
@@ -33,87 +33,86 @@ Notes:

#define TC_3W_POLL_MAX_TRY_CNT 5
static u8 MAC_REG_TABLE[][2] = {
- /*PAGA 0: */
- /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
- /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
- /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */
- {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
- {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
- {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
- {0x94, 0x0F}, {0x95, 0x32},
- {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
- {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
- {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
- {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
- {0xff, 0x00},
-
- /*PAGE 1: */
- /* For Flextronics system Logo PCIHCT failure: */
- /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
- {0x5e, 0x01},
- {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
- {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
- {0x82, 0xFF}, {0x83, 0x03},
- {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
- {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */
- {0xe2, 0x00},
-
-
- /* PAGE 2: */
- {0x5e, 0x02},
- {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
- {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
- {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
- {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
- {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
- {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
- {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
- /* PAGA 0: */
- {0x5e, 0x00}, {0x9f, 0x03}
+ /*PAGA 0: */
+ /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
+ /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
+ /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */
+ {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
+ {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
+ {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
+ {0x94, 0x0F}, {0x95, 0x32},
+ {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
+ {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
+ {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
+ {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
+ {0xff, 0x00},
+
+ /*PAGE 1: */
+ /* For Flextronics system Logo PCIHCT failure: */
+ /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
+ {0x5e, 0x01},
+ {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
+ {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
+ {0x82, 0xFF}, {0x83, 0x03},
+ {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
+ {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */
+ {0xe2, 0x00},
+
+
+ /* PAGE 2: */
+ {0x5e, 0x02},
+ {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
+ {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
+ {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
+ {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
+ {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
+ {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
+ {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
+
+ /* PAGA 0: */
+ {0x5e, 0x00}, {0x9f, 0x03}
};


static u8 ZEBRA_AGC[] = {
- 0,
- 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
- 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
- 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
- 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
- 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
- 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
- 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
- };
+ 0,
+ 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+ 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+ 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+ 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+ 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+ 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+ 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+ };

-static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
- 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
- 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
- 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
- 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
- 0x0183, 0x0163, 0x0143, 0x0123, 0x0103
+static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
+ 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+ 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+ 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+ 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+ 0x0183, 0x0163, 0x0143, 0x0123, 0x0103
};

static u8 OFDM_CONFIG[] = {
- /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
- /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
- /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
-
- /* 0x00 */
- 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
- 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
- /* 0x10 */
- 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
- 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
- /* 0x20 */
- 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
- 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
- /* 0x30 */
- 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
- 0xD8, 0x3C, 0x7B, 0x10, 0x10
- };
-
-/* ---------------------------------------------------------------
+ /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
+ /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
+ /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
+ /* 0x00 */
+ 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
+ 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
+ /* 0x10 */
+ 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
+ 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
+ /* 0x20 */
+ 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
+ 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
+ /* 0x30 */
+ 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
+ 0xD8, 0x3C, 0x7B, 0x10, 0x10
+ };
+
+ /*---------------------------------------------------------------
* Hardware IO
* the code is ported from Windows source code
----------------------------------------------------------------*/
@@ -126,7 +125,7 @@ PlatformIOWrite1Byte(
)
{
write_nic_byte(dev, offset, data);
- read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
+ read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */

}

@@ -152,12 +151,12 @@ PlatformIOWrite4Byte(
)
{
/* {by amy 080312 */
-if (offset == PhyAddr) {
-/* For Base Band configuration. */
+ if (offset == PhyAddr) {
+ /* For Base Band configuration. */
unsigned char cmdByte;
unsigned long dataBytes;
unsigned char idx;
- u8 u1bTmp;
+ u8 u1bTmp;

cmdByte = (u8)(data & 0x000000ff);
dataBytes = data>>8;
@@ -170,10 +169,10 @@ if (offset == PhyAddr) {
acquiring the spinlock in such context.
2. PlatformIOWrite4Byte() MUST NOT be recursive.
*/
-/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
+ /* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */

for (idx = 0; idx < 30; idx++) {
- /* Make sure command bit is clear before access it. */
+ /* Make sure command bit is clear before access it. */
u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
if ((u1bTmp & BIT7) == 0)
break;
@@ -186,7 +185,7 @@ if (offset == PhyAddr) {

write_nic_byte(dev, offset, cmdByte);

-/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
+ /* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
}
/* by amy 080312} */
else {
@@ -275,10 +274,10 @@ HwHSSIThreeWire(
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);

if (bSI)
- u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
+ u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */

else
- u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
+ u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */


write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
@@ -326,7 +325,7 @@ HwHSSIThreeWire(
}
} else { /* read */
if (bSI) {
- /* SI - reg274[3:0] : RF register's Address */
+ /* SI - reg274[3:0] : RF register's Address */
write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
} else {
/* PI - reg274[15:12] : RF register's Address */
@@ -343,7 +342,7 @@ HwHSSIThreeWire(


/* Check if DONE is set. */
- for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
+ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
break;
@@ -353,7 +352,7 @@ HwHSSIThreeWire(

write_nic_byte(dev, SW_3W_CMD1, 0);

- /* Read back data for read operation. */
+ /* Read back data for read operation. */
if (bWrite == 0) {
if (bSI) {
/* Serial Interface : reg363_362[11:0] */
@@ -443,9 +442,9 @@ ReadBBPortUchar(
*/
bool
SetAntennaConfig87SE(
- struct net_device *dev,
- u8 DefaultAnt, /* 0: Main, 1: Aux. */
- bool bAntDiversity /* 1:Enable, 0: Disable. */
+ struct net_device *dev,
+ u8 DefaultAnt, /* 0: Main, 1: Aux. */
+ bool bAntDiversity /* 1:Enable, 0: Disable. */
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -453,48 +452,48 @@ SetAntennaConfig87SE(

/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */

- /* Threshold for antenna diversity. */
+ /* Threshold for antenna diversity. */
write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */

- if (bAntDiversity) { /* Enable Antenna Diversity. */
- if (DefaultAnt == 1) { /* aux antenna */
+ if (bAntDiversity) { /* Enable Antenna Diversity. */
+ if (DefaultAnt == 1) { /* aux antenna */

- /* Mac register, aux antenna */
+ /* Mac register, aux antenna */
write_nic_byte(dev, ANTSEL, 0x00);

- /* Config CCK RX antenna. */
+ /* Config CCK RX antenna. */
write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */

- /* Config OFDM RX antenna. */
- write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
- write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */
- } else { /* use main antenna */
- /* Mac register, main antenna */
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
+ write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */
+ } else { /* use main antenna */
+ /* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03);
- /* base band */
- /* Config CCK RX antenna. */
- write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
- write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
+ /* base band */
+ /* Config CCK RX antenna. */
+ write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+ write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */

/* Config OFDM RX antenna. */
write_phy_ofdm(dev, 0x0d, 0x5c); /* Reg0d : 5c */
write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */
}
- } else {
+ } else {
/* Disable Antenna Diversity. */
- if (DefaultAnt == 1) { /* aux Antenna */
+ if (DefaultAnt == 1) { /* aux Antenna */
/* Mac register, aux antenna */
write_nic_byte(dev, ANTSEL, 0x00);

/* Config CCK RX antenna. */
- write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
- write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
+ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+ write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */

/* Config OFDM RX antenna. */
- write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
- write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */
- } else { /* main Antenna */
+ write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */
+ write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */
+ } else { /* main Antenna */
/* Mac register, main antenna */
write_nic_byte(dev, ANTSEL, 0x03);

@@ -502,9 +501,9 @@ SetAntennaConfig87SE(
write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */

- /* Config OFDM RX antenna. */
- write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
- write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
+ /* Config OFDM RX antenna. */
+ write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
+ write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
}
}
priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
@@ -539,140 +538,128 @@ ZEBRA_Config_85BASIC_HardCode(


/* Page1 : reg16-reg30 */
- RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */
- u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1);
- u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1);
+ RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */
+ u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1);
+ u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1);

if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
d_cut = 1;
printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
}

- /* Page0 : reg0-reg15 */
-
- RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */
-
- RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1);
-
- RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */
-
- RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */
-
- RF_WriteReg(dev, 0x04, 0x0975); mdelay(1);
- RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1);
- RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1);
- RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1);
- RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1);
- RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1);
- RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1);
- RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1);
- RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1);
- RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1);
- RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1);
- RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1);
-
+ /* Page0 : reg0-reg15 */
+
+ RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */
+ RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1);
+ RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */
+ RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */
+ RF_WriteReg(dev, 0x04, 0x0975); mdelay(1);
+ RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1);
+ RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1);
+ RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1);
+ RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1);
+ RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1);
+ RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1);
+ RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1);
+ RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1);
+ RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1);
+ RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1);

/* Page1 : reg16-reg30 */
- RF_WriteReg(dev, 0x00, 0x013f); mdelay(1);
-
- RF_WriteReg(dev, 0x03, 0x0806); mdelay(1);
-
- RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1);
- RF_WriteReg(dev, 0x05, 0x059b); mdelay(1);
- RF_WriteReg(dev, 0x06, 0x0081); mdelay(1);
-
-
- RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
+ RF_WriteReg(dev, 0x00, 0x013f); mdelay(1);
+ RF_WriteReg(dev, 0x03, 0x0806); mdelay(1);
+ RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1);
+ RF_WriteReg(dev, 0x05, 0x059b); mdelay(1);
+ RF_WriteReg(dev, 0x06, 0x0081); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1);
/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
- RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
- RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1);
+ RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
+ RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1);

if (d_cut) {
- RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
- RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
- RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */
- } else {
- RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
- RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
- RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */
+ RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
+ RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
+ RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */
+ } else {
+ RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1);
+ RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1);
+ RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */
}

- RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
-
- RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */
+ RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
+ RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */
+ RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1);
+ RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1);

- RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1);
- RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1);
- for (i = 0; i <= 36; i++) {
- RF_WriteReg(dev, 0x01, i); mdelay(1);
+ for (i = 0; i <= 36; i++) {
+ RF_WriteReg(dev, 0x01, i); mdelay(1);
RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
}

- RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */
- RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */
+ RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */
+ RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */
+ RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */
+ mdelay(200); /* Deay 200 ms. */ /* 0xfd */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */
- mdelay(200); /* Deay 200 ms. */ /* 0xfd */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
+ RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
+ mdelay(10); /* Deay 10 ms. */ /* 0xfd */

- RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
- mdelay(10); /* Deay 10 ms. */ /* 0xfd */
-
- RF_WriteReg(dev, 0x07, 0x0000); mdelay(1);
- RF_WriteReg(dev, 0x07, 0x0180); mdelay(1);
- RF_WriteReg(dev, 0x07, 0x0220); mdelay(1);
- RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x0000); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x0180); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x0220); mdelay(1);
+ RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1);

/* DAC calibration off 20070702 */
- RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1);
- RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
+ RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1);
+ RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1);
/* {by amy 080312 */
/* For crystal calibration, added by Roger, 2007.12.11. */
- if (priv->bXtalCalibration) { /* reg 30. */
+ if (priv->bXtalCalibration) { /* reg 30. */
/* enable crystal calibration.
RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0].
(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
- So we should minus 4 BITs offset. */
- RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
+ So we should minus 4 BITs offset. */
+ RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
- (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
- } else {
+ (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
+ } else {
/* using default value. Xin=6, Xout=6. */
- RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
+ RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1);
}
/* by amy 080312 */

- RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */
- RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */
- RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */
- RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */
+ RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */
+ RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */
+ RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */
+ RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
mdelay(10); /* Deay 10 ms.*/ /* 0xfe */
- RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */
- RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */
- RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */
-
- RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
- RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
- /* power save parameters. */
+ RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
+ RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */
+ /* power save parameters. */
u1b24E = read_nic_byte(dev, 0x24E);
write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));

@@ -697,7 +684,7 @@ ZEBRA_Config_85BASIC_HardCode(
write_phy_cck(dev, 0x2f, 0x06);
write_phy_cck(dev, 0x01, 0x46);

- /* power control */
+ /* power control */
write_nic_byte(dev, CCK_TXAGC, 0x10);
write_nic_byte(dev, OFDM_TXAGC, 0x1B);
write_nic_byte(dev, ANTSEL, 0x03);
@@ -712,7 +699,7 @@ ZEBRA_Config_85BASIC_HardCode(

write_phy_ofdm(dev, 0x00, 0x12);

- for (i = 0; i < 128; i++) {
+ for (i = 0; i < 128; i++) {

data = ZEBRA_AGC[i+1];
data = data << 8;
@@ -737,14 +724,14 @@ ZEBRA_Config_85BASIC_HardCode(
=============================================================================
*/

- for (i = 0; i < 60; i++) {
+ for (i = 0; i < 60; i++) {
u4bRegOffset = i;
u4bRegValue = OFDM_CONFIG[i];

WriteBBPortUchar(dev,
- (0x00000080 |
- (u4bRegOffset & 0x7f) |
- ((u4bRegValue & 0xff) << 8)));
+ (0x00000080 |
+ (u4bRegOffset & 0x7f) |
+ ((u4bRegValue & 0xff) << 8)));
}

/*
@@ -768,7 +755,7 @@ UpdateInitialGain(
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

/* lzm add 080826 */
- if (priv->eRFPowerState != eRfOn) {
+ if (priv->eRFPowerState != eRfOn) {
/* Don't access BB/RF under disable PLL situation.
RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
Back to the original state
@@ -826,7 +813,7 @@ UpdateInitialGain(
write_phy_ofdm(dev, 0x05, 0xfc); mdelay(1);
break;

- default: /* MP */
+ default: /* MP */
write_phy_ofdm(dev, 0x17, 0x26); mdelay(1);
write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
write_phy_ofdm(dev, 0x05, 0xfa); mdelay(1);
@@ -863,7 +850,7 @@ PhyConfig8185(
ZEBRA_Config_85BASIC_HardCode(dev);
/* {by amy 080312 */
/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */
- if (priv->bDigMechanism) {
+ if (priv->bDigMechanism) {
if (priv->InitialGain == 0)
priv->InitialGain = 4;
}
@@ -889,11 +876,11 @@ HwConfigureRTL8185(
)
{
/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
- u8 bUNIVERSAL_CONTROL_RL = 0;
- u8 bUNIVERSAL_CONTROL_AGC = 1;
- u8 bUNIVERSAL_CONTROL_ANT = 1;
- u8 bAUTO_RATE_FALLBACK_CTL = 1;
- u8 val8;
+ u8 bUNIVERSAL_CONTROL_RL = 0;
+ u8 bUNIVERSAL_CONTROL_AGC = 1;
+ u8 bUNIVERSAL_CONTROL_ANT = 1;
+ u8 bAUTO_RATE_FALLBACK_CTL = 1;
+ u8 val8;
write_nic_word(dev, BRSR, 0x0fff);
/* Retry limit */
val8 = read_nic_byte(dev, CW_CONF);
@@ -907,24 +894,24 @@ HwConfigureRTL8185(

/* Tx AGC */
val8 = read_nic_byte(dev, TXAGC_CTL);
- if (bUNIVERSAL_CONTROL_AGC) {
+ if (bUNIVERSAL_CONTROL_AGC) {
write_nic_byte(dev, CCK_TXAGC, 128);
write_nic_byte(dev, OFDM_TXAGC, 128);
val8 = val8 & 0xfe;
- } else {
+ } else {
val8 = val8 | 0x01 ;
}


write_nic_byte(dev, TXAGC_CTL, val8);

- /* Tx Antenna including Feedback control */
+ /* Tx Antenna including Feedback control */
val8 = read_nic_byte(dev, TXAGC_CTL);

- if (bUNIVERSAL_CONTROL_ANT) {
+ if (bUNIVERSAL_CONTROL_ANT) {
write_nic_byte(dev, ANTSEL, 0x00);
val8 = val8 & 0xfd;
- } else {
+ } else {
val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
}

@@ -933,7 +920,7 @@ HwConfigureRTL8185(
/* Auto Rate fallback control */
val8 = read_nic_byte(dev, RATE_FALLBACK);
val8 &= 0x7c;
- if (bAUTO_RATE_FALLBACK_CTL) {
+ if (bAUTO_RATE_FALLBACK_CTL) {
val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;

/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
@@ -951,22 +938,20 @@ MacConfig_85BASIC_HardCode(
MACREG.TXT
============================================================================
*/
- int nLinesRead = 0;
-
- u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
- int i;
+ int nLinesRead = 0;
+ u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
+ int i;

nLinesRead = sizeof(MAC_REG_TABLE)/2;

- for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
+ for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
u4bRegOffset = MAC_REG_TABLE[i][0];
u4bRegValue = MAC_REG_TABLE[i][1];

if (u4bRegOffset == 0x5e)
u4bPageIndex = u4bRegValue;
-
else
- u4bRegOffset |= (u4bPageIndex << 8);
+ u4bRegOffset |= (u4bPageIndex << 8);

write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
}
@@ -994,18 +979,18 @@ MacConfig_85BASIC(
PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
PlatformIOWrite1Byte(dev, 0x1F8, 0x00);

- /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
- /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
+ /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
+ /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */

/* Enable DA10 TX power saving */
u1DA = read_nic_byte(dev, PHYPR);
write_nic_byte(dev, PHYPR, (u1DA | BIT2));

- /* POWER: */
+ /* POWER: */
write_nic_word(dev, 0x360, 0x1000);
write_nic_word(dev, 0x362, 0x1000);

- /* AFE. */
+ /* AFE. */
write_nic_word(dev, 0x370, 0x0560);
write_nic_word(dev, 0x372, 0x0560);
write_nic_word(dev, 0x374, 0x0DA4);
@@ -1013,7 +998,7 @@ MacConfig_85BASIC(
write_nic_word(dev, 0x378, 0x0560);
write_nic_word(dev, 0x37A, 0x0560);
write_nic_word(dev, 0x37C, 0x00EC);
- write_nic_word(dev, 0x37E, 0x00EC); /*+edward */
+ write_nic_word(dev, 0x37E, 0x00EC); /* +edward */
write_nic_byte(dev, 0x24E, 0x01);
}

@@ -1022,7 +1007,7 @@ GetSupportedWirelessMode8185(
struct net_device *dev
)
{
- u8 btSupportedWirelessMode = 0;
+ u8 btSupportedWirelessMode = 0;

btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G);
return btSupportedWirelessMode;
@@ -1035,12 +1020,12 @@ ActUpdateChannelAccessSetting(
PCHANNEL_ACCESS_SETTING ChnlAccessSetting
)
{
- struct r8180_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee80211;
+ struct r8180_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
AC_CODING eACI;
AC_PARAM AcParam;
- u8 bFollowLegacySetting = 0;
- u8 u1bAIFS;
+ u8 bFollowLegacySetting = 0;
+ u8 u1bAIFS;

/*
<RJ_TODO_8185B>
@@ -1053,14 +1038,14 @@ ActUpdateChannelAccessSetting(
even in nQBss.
*/
ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
- ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
- ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
- ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
- ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
- ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
+ ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
+ ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */

write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
- write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
+ write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */

u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer);

@@ -1074,7 +1059,7 @@ ActUpdateChannelAccessSetting(
}

/* this setting is copied from rtl8187B. xiong-2006-11-13 */
- if (bFollowLegacySetting) {
+ if (bFollowLegacySetting) {

/*
Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
@@ -1083,8 +1068,8 @@ ActUpdateChannelAccessSetting(
AcParam.longData = 0;
AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */
AcParam.f.AciAifsn.f.ACM = 0;
- AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */
- AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */
+ AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */
+ AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */
AcParam.f.TXOPLimit = 0;

/* lzm reserved 080826 */
@@ -1095,7 +1080,7 @@ ActUpdateChannelAccessSetting(
if (ieee->iw_mode == IW_MODE_ADHOC)
AcParam.f.TXOPLimit = 0x0020;

- for (eACI = 0; eACI < AC_MAX; eACI++) {
+ for (eACI = 0; eACI < AC_MAX; eACI++) {
AcParam.f.AciAifsn.f.ACI = (u8)eACI;
{
PAC_PARAM pAcParam = (PAC_PARAM)(&AcParam);
@@ -1111,7 +1096,7 @@ ActUpdateChannelAccessSetting(
(((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET) |
(((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET));

- switch (eACI) {
+ switch (eACI) {
case AC1_BK:
/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
break;
@@ -1133,47 +1118,47 @@ ActUpdateChannelAccessSetting(
break;
}

- /* Cehck ACM bit. */
+ /* Cehck ACM bit. */
/* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13. */
{
PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
AC_CODING eACI = pAciAifsn->f.ACI;

- /*modified Joseph */
- /*for 8187B AsynIORead issue */
+ /*modified Joseph */
+ /*for 8187B AsynIORead issue */
u8 AcmCtrl = 0;
- if (pAciAifsn->f.ACM) {
+ if (pAciAifsn->f.ACM) {
/* ACM bit is 1. */
- switch (eACI) {
+ switch (eACI) {
case AC0_BE:
- AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
+ AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
break;

case AC2_VI:
- AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
+ AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
break;

case AC3_VO:
- AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
+ AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
break;

default:
DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI);
break;
}
- } else {
+ } else {
/* ACM bit is 0. */
- switch (eACI) {
+ switch (eACI) {
case AC0_BE:
- AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */
+ AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */
break;

case AC2_VI:
- AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */
+ AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */
break;

case AC3_VO:
- AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */
+ AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */
break;

default:
@@ -1193,30 +1178,30 @@ ActSetWirelessMode8185(
u8 btWirelessMode
)
{
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee80211;
+ struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee80211;
u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);

if ((btWirelessMode & btSupportedWirelessMode) == 0) {
- /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
+ /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
btWirelessMode, btSupportedWirelessMode);
return;
}

- /* 1. Assign wireless mode to swtich if necessary. */
- if (btWirelessMode == WIRELESS_MODE_AUTO) {
- if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
+ /* 1. Assign wireless mode to swtich if necessary. */
+ if (btWirelessMode == WIRELESS_MODE_AUTO) {
+ if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
btWirelessMode = WIRELESS_MODE_A;
- } else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
+ } else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
btWirelessMode = WIRELESS_MODE_G;

- } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) {
- btWirelessMode = WIRELESS_MODE_B;
- } else {
- DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
- btSupportedWirelessMode);
+ } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) {
btWirelessMode = WIRELESS_MODE_B;
+ } else {
+ DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
+ btSupportedWirelessMode);
+ btWirelessMode = WIRELESS_MODE_B;
}
}

@@ -1227,13 +1212,13 @@ ActSetWirelessMode8185(

ieee->mode = (WIRELESS_MODE)btWirelessMode;

- /* 3. Change related setting. */
- if( ieee->mode == WIRELESS_MODE_A ) {
+ /* 3. Change related setting. */
+ if( ieee->mode == WIRELESS_MODE_A ) {
DMESG("WIRELESS_MODE_A\n");
- } else if( ieee->mode == WIRELESS_MODE_B ) {
- DMESG("WIRELESS_MODE_B\n");
- } else if( ieee->mode == WIRELESS_MODE_G ) {
- DMESG("WIRELESS_MODE_G\n");
+ } else if( ieee->mode == WIRELESS_MODE_B ) {
+ DMESG("WIRELESS_MODE_B\n");
+ } else if( ieee->mode == WIRELESS_MODE_G ) {
+ DMESG("WIRELESS_MODE_G\n");
}
ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
}
@@ -1260,7 +1245,7 @@ MgntDisconnectIBSS(
)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- u8 i;
+ u8 i;

DrvIFIndicateDisassociation(dev, unspec_reason);

@@ -1295,19 +1280,16 @@ MlmeDisassociateRequest(

SendDisassociation(priv->ieee80211, asSta, asRsn);

- if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
- /*ShuChen TODO: change media status. */
- /*ShuChen TODO: What to do when disassociate. */
+ if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
+ /* ShuChen TODO: change media status. */
+ /* ShuChen TODO: What to do when disassociate. */
DrvIFIndicateDisassociation(dev, unspec_reason);

-
-
for (i = 0; i < 6; i++)
priv->ieee80211->current_network.bssid[i] = 0x22;

ieee80211_disassociate(priv->ieee80211);
}
-
}

void
@@ -1343,17 +1325,17 @@ MgntDisconnect(

if (IS_DOT11D_ENABLE(priv->ieee80211))
Dot11d_Reset(priv->ieee80211);
- /* In adhoc mode, update beacon frame. */
+ /* In adhoc mode, update beacon frame. */
if (priv->ieee80211->state == IEEE80211_LINKED) {
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
MgntDisconnectIBSS(dev);

- if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
+ if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
/* We clear key here instead of MgntDisconnectAP() because that
MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
used to handle disassociation related things to AP, e.g. send Disassoc
- frame to AP. 2005.01.27, by rcnjko. */
+ frame to AP. 2005.01.27, by rcnjko. */
MgntDisconnectAP(dev, asRsn);
}
/* Inidicate Disconnect, 2005.02.23, by rcnjko. */
@@ -1374,13 +1356,13 @@ SetRFPowerState(
RT_RF_POWER_STATE eRFPowerState
)
{
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- bool bResult = false;
+ struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+ bool bResult = false;

if (eRFPowerState == priv->eRFPowerState)
return bResult;

- bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
+ bResult = SetZebraRFPowerState8185(dev, eRFPowerState);

return bResult;
}
@@ -1404,11 +1386,11 @@ MgntActSet_RF_State(
u32 ChangeSource
)
{
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- bool bActionAllowed = false;
- bool bConnectBySSID = false;
- RT_RF_POWER_STATE rtState;
- u16 RFWaitCounter = 0;
+ struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+ bool bActionAllowed = false;
+ bool bConnectBySSID = false;
+ RT_RF_POWER_STATE rtState;
+ u16 RFWaitCounter = 0;
unsigned long flag;
/*
Prevent the race condition of RF state change. By Bruce, 2007-11-28.
@@ -1416,21 +1398,21 @@ MgntActSet_RF_State(
*/
while (true) {
spin_lock_irqsave(&priv->rf_ps_lock, flag);
- if (priv->RFChangeInProgress) {
+ if (priv->RFChangeInProgress) {
spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
/* Set RF after the previous action is done. */
- while (priv->RFChangeInProgress) {
+ while (priv->RFChangeInProgress) {
RFWaitCounter++;
udelay(1000); /* 1 ms */

- /* Wait too long, return FALSE to avoid to be stuck here. */
- if (RFWaitCounter > 1000) { /* 1sec */
+ /* Wait too long, return FALSE to avoid to be stuck here. */
+ if (RFWaitCounter > 1000) { /* 1sec */
printk("MgntActSet_RF_State(): Wait too long to set RF\n");
- /* TODO: Reset RF state? */
+ /* TODO: Reset RF state? */
return false;
}
}
- } else {
+ } else {
priv->RFChangeInProgress = true;
spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
break;
@@ -1438,7 +1420,7 @@ MgntActSet_RF_State(
}
rtState = priv->eRFPowerState;

- switch (StateToSet) {
+ switch (StateToSet) {
case eRfOn:
/*
Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
@@ -1453,25 +1435,24 @@ MgntActSet_RF_State(
if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest)
bConnectBySSID = true;

- } else
- ;
+ } else
+ ;
break;

case eRfOff:
- /* 070125, rcnjko: we always keep connected in AP mode. */
-
- if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
- /*
- 060808, Annie:
- Disconnect to current BSS when radio off. Asked by QuanTa.
-
- Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
- because we do NOT need to set ssid to dummy ones.
- */
- MgntDisconnect(dev, disas_lv_ss);
-
- /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
- }
+ /* 070125, rcnjko: we always keep connected in AP mode. */
+
+ if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
+ /*
+ 060808, Annie:
+ Disconnect to current BSS when radio off. Asked by QuanTa.
+
+ Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
+ because we do NOT need to set ssid to dummy ones.
+ */
+ MgntDisconnect(dev, disas_lv_ss);
+ /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
+ }

priv->RfOffReason |= ChangeSource;
bActionAllowed = true;
@@ -1484,14 +1465,14 @@ MgntActSet_RF_State(
break;
}

- if (bActionAllowed) {
- /* Config HW to the specified mode. */
+ if (bActionAllowed) {
+ /* Config HW to the specified mode. */
SetRFPowerState(dev, StateToSet);

/* Turn on RF. */
- if (StateToSet == eRfOn) {
+ if (StateToSet == eRfOn) {
HalEnableRx8185Dummy(dev);
- if (bConnectBySSID) {
+ if (bConnectBySSID) {
/* by amy not supported */
}
}
@@ -1542,7 +1523,7 @@ IPSEnter(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- if (priv->bInactivePs) {
+ if (priv->bInactivePs) {
rtState = priv->eRFPowerState;

/*
@@ -1554,7 +1535,7 @@ IPSEnter(
(5) AP mode (send Beacon)
*/
if (rtState == eRfOn && !priv->bSwRfProcessing
- && (priv->ieee80211->state != IEEE80211_LINKED)) {
+ && (priv->ieee80211->state != IEEE80211_LINKED)) {
priv->eInactivePowerState = eRfOff;
InactivePowerSave(dev);
}
@@ -1567,9 +1548,9 @@ IPSLeave(
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
RT_RF_POWER_STATE rtState;
- if (priv->bInactivePs) {
+ if (priv->bInactivePs) {
rtState = priv->eRFPowerState;
- if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
+ if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
priv->eInactivePowerState = eRfOn;
InactivePowerSave(dev);
}
@@ -1582,8 +1563,8 @@ void rtl8185b_adapter_start(struct net_device *dev)
struct ieee80211_device *ieee = priv->ieee80211;

u8 SupportedWirelessMode;
- u8 InitWirelessMode;
- u8 bInvalidWirelessMode = 0;
+ u8 InitWirelessMode;
+ u8 bInvalidWirelessMode = 0;
u8 tmpu8;
u8 btCR9346;
u8 TmpU1b;
@@ -1598,14 +1579,14 @@ void rtl8185b_adapter_start(struct net_device *dev)
HwConfigureRTL8185(dev);
write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
- write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
+ write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
write_nic_word(dev, BcnItv, 100);
write_nic_word(dev, AtimWnd, 2);
PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
write_nic_byte(dev, WPA_CONFIG, 0);
MacConfig_85BASIC(dev);
- /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
- /* BT_DEMO_BOARD type */
+ /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
+ /* BT_DEMO_BOARD type */
PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);

/*
@@ -1613,41 +1594,41 @@ void rtl8185b_adapter_start(struct net_device *dev)
Set up PHY related.
-----------------------------------------------------------------------------
*/
- /* Enable Config3.PARAM_En to revise AnaaParm. */
- write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
+ /* Enable Config3.PARAM_En to revise AnaaParm. */
+ write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
tmpu8 = read_nic_byte(dev, CONFIG3);
write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
- /* Turn on Analog power. */
- /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
+ /* Turn on Analog power. */
+ /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
write_nic_word(dev, ANAPARAM3, 0x0010);

write_nic_byte(dev, CONFIG3, tmpu8);
write_nic_byte(dev, CR9346, 0x00);
- /* enable EEM0 and EEM1 in 9346CR */
+ /* enable EEM0 and EEM1 in 9346CR */
btCR9346 = read_nic_byte(dev, CR9346);
write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));

- /* B cut use LED1 to control HW RF on/off */
+ /* B cut use LED1 to control HW RF on/off */
TmpU1b = read_nic_byte(dev, CONFIG5);
TmpU1b = TmpU1b & ~BIT3;
write_nic_byte(dev, CONFIG5, TmpU1b);

- /* disable EEM0 and EEM1 in 9346CR */
+ /* disable EEM0 and EEM1 in 9346CR */
btCR9346 &= ~(0xC0);
write_nic_byte(dev, CR9346, btCR9346);

- /* Enable Led (suggested by Jong) */
- /* B-cut RF Radio on/off 5e[3]=0 */
+ /* Enable Led (suggested by Jong) */
+ /* B-cut RF Radio on/off 5e[3]=0 */
btPSR = read_nic_byte(dev, PSR);
write_nic_byte(dev, PSR, (btPSR | BIT3));
- /* setup initial timing for RFE. */
+ /* setup initial timing for RFE. */
write_nic_word(dev, RFPinsOutput, 0x0480);
SetOutputEnableOfRfPins(dev);
write_nic_word(dev, RFPinsSelect, 0x2488);

- /* PHY config. */
+ /* PHY config. */
PhyConfig8185(dev);

/*
@@ -1659,28 +1640,28 @@ void rtl8185b_adapter_start(struct net_device *dev)
if ((ieee->mode != WIRELESS_MODE_B) &&
(ieee->mode != WIRELESS_MODE_G) &&
(ieee->mode != WIRELESS_MODE_A) &&
- (ieee->mode != WIRELESS_MODE_AUTO)) {
- /* It should be one of B, G, A, or AUTO. */
+ (ieee->mode != WIRELESS_MODE_AUTO)) {
+ /* It should be one of B, G, A, or AUTO. */
bInvalidWirelessMode = 1;
- } else {
- /* One of B, G, A, or AUTO. */
- /* Check if the wireless mode is supported by RF. */
+ } else {
+ /* One of B, G, A, or AUTO. */
+ /* Check if the wireless mode is supported by RF. */
if ((ieee->mode != WIRELESS_MODE_AUTO) &&
- (ieee->mode & SupportedWirelessMode) == 0) {
+ (ieee->mode & SupportedWirelessMode) == 0) {
bInvalidWirelessMode = 1;
}
}

- if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
- /* Auto or other invalid value. */
- /* Assigne a wireless mode to initialize. */
- if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
+ if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
+ /* Auto or other invalid value. */
+ /* Assigne a wireless mode to initialize. */
+ if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
InitWirelessMode = WIRELESS_MODE_A;
- } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
+ } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
InitWirelessMode = WIRELESS_MODE_G;
- } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
+ } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
InitWirelessMode = WIRELESS_MODE_B;
- } else {
+ } else {
DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n",
SupportedWirelessMode);
InitWirelessMode = WIRELESS_MODE_B;
@@ -1690,11 +1671,11 @@ void rtl8185b_adapter_start(struct net_device *dev)
if (bInvalidWirelessMode)
ieee->mode = (WIRELESS_MODE)InitWirelessMode;

- } else {
- /* One of B, G, A. */
+ } else {
+ /* One of B, G, A. */
InitWirelessMode = ieee->mode;
}
-/* by amy for power save */
+/* by amy for power save */
priv->eRFPowerState = eRfOff;
priv->RfOffReason = 0;
{
@@ -1706,7 +1687,7 @@ void rtl8185b_adapter_start(struct net_device *dev)
if (priv->bInactivePs)
MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);

-/* by amy for power save */
+/* by amy for power save */

ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));

@@ -1715,7 +1696,7 @@ void rtl8185b_adapter_start(struct net_device *dev)
rtl8185b_irq_enable(dev);

netif_start_queue(dev);
- }
+}

void rtl8185b_rx_enable(struct net_device *dev)
{
@@ -1728,7 +1709,7 @@ void rtl8185b_rx_enable(struct net_device *dev)
DMESG("NIC in promisc mode");

if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC) {
+ dev->flags & IFF_PROMISC) {
priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
}
--
1.7.7.6


\
 
 \ /
  Last update: 2012-03-16 23:51    [W:0.073 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site