lkml.org 
[lkml]   [2012]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[V4 PATCH 2/2] drivers-gpu-drm-i915-backlight-brightness-inverted.patch
Following the documentation of the Legacy Backlight Brightness (LBB)
Register in the configuration space of some Intel PCI graphics adapters,
setting the LBB register with the value 0x0 causes the backlight to be
turned off, and 0xFF causes the backlight to be set to 100% intensity
(http://download.intel.com/embedded/processors/Whitepaper/324567.pdf).
The Acer Aspire 5734Z, however, turns the backlight off at 0xFF and sets
it to maximum intensity at 0. In consequence, the screen of this systems
becomes dark at an early boot stage which makes it unusable. The same
inversion applies to the BLC_PWM_CTL I915 register. This problem was
introduced in kernel version 2.6.38 when the PCI device of this system
was first supported by the i915 KMS module.

This patch adds a quirk to invert the sense of the brightness variable
in case an Acer Aspire 5734Z is encountered.

In addition, there is now a parameter of the i915 module to enable
inversion of the brightness variable (i915 brightness_inverted).

Signed-off-by: Carsten Emde <C.Emde@osadl.org>

---
Documentation/kernel-parameters.txt | 9 +++++++++
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
drivers/gpu/drm/i915/intel_panel.c | 16 ++++++++++++++++
4 files changed, 38 insertions(+)

Index: linux-3.3-rc7/Documentation/kernel-parameters.txt
===================================================================
--- linux-3.3-rc7.orig/Documentation/kernel-parameters.txt
+++ linux-3.3-rc7/Documentation/kernel-parameters.txt
@@ -979,6 +979,15 @@ bytes respectively. Such letter suffixes
i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
capability is set.

+ i915.brightness_inverted
+ [DRM] Invert the sense of the variable that is used to
+ set the brightness of the panel backlight. Normally a
+ value of 0 indicates backlight switched off, and the
+ maximum value sets the backlight to maximum brightness.
+ If this parameter is specified, a value of 0 sets the
+ backlight to maximum brightness, and the maximum value
+ switches the backlight off.
+
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]

Index: linux-3.3-rc7/drivers/gpu/drm/i915/i915_drv.h
===================================================================
--- linux-3.3-rc7.orig/drivers/gpu/drm/i915/i915_drv.h
+++ linux-3.3-rc7/drivers/gpu/drm/i915/i915_drv.h
@@ -275,6 +275,7 @@ enum intel_pch {

#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
+#define QUIRK_BRIGHTNESS_INVERTED (1<<2)

struct intel_fbdev;
struct intel_fbc_work;
Index: linux-3.3-rc7/drivers/gpu/drm/i915/intel_display.c
===================================================================
--- linux-3.3-rc7.orig/drivers/gpu/drm/i915/intel_display.c
+++ linux-3.3-rc7/drivers/gpu/drm/i915/intel_display.c
@@ -8950,6 +8950,15 @@ static void quirk_ssc_force_disable(stru
dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
}

+/*
+ * At least one machine (Acer Aspire 5734Z) has inverted backlight brightness
+ */
+static void quirk_brightness_inverted(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_BRIGHTNESS_INVERTED;
+}
+
struct intel_quirk {
int device;
int subsystem_vendor;
@@ -8984,6 +8993,9 @@ struct intel_quirk intel_quirks[] = {

/* Sony Vaio Y cannot use SSC on LVDS */
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
+
+ /* Acer Aspire 5734Z has inverted backlight brightness */
+ { 0x2a42, 0x1025, 0x0459, quirk_brightness_inverted },
};

static void intel_init_quirks(struct drm_device *dev)
Index: linux-3.3-rc7/drivers/gpu/drm/i915/intel_panel.c
===================================================================
--- linux-3.3-rc7.orig/drivers/gpu/drm/i915/intel_panel.c
+++ linux-3.3-rc7/drivers/gpu/drm/i915/intel_panel.c
@@ -28,6 +28,7 @@
* Chris Wilson <chris@chris-wilson.co.uk>
*/

+#include <linux/moduleparam.h>
#include "intel_drv.h"

#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
@@ -191,6 +192,10 @@ u32 intel_panel_get_max_backlight(struct
return max;
}

+static bool brightness_inverted;
+MODULE_PARM_DESC(brightness_inverted, "Backlight brightness value is inverted "
+ "(0 = max brightness, max value = backlight switched off)");
+module_param_named(brightness_inverted, brightness_inverted, bool, 0600);
u32 intel_panel_get_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -212,6 +217,11 @@ u32 intel_panel_get_backlight(struct drm
}

DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
+ if ((dev_priv->quirks & QUIRK_BRIGHTNESS_INVERTED) ||
+ brightness_inverted) {
+ u32 max = intel_panel_get_max_backlight(dev);
+ val = max - val;
+ }
return val;
}

@@ -229,6 +239,12 @@ static void intel_panel_actually_set_bac

DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);

+ if ((dev_priv->quirks & QUIRK_BRIGHTNESS_INVERTED) ||
+ brightness_inverted) {
+ u32 max = intel_panel_get_max_backlight(dev);
+ level = max - level;
+ }
+
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);



\
 
 \ /
  Last update: 2012-03-15 12:25    [W:0.035 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site