Messages in this thread | | | From | Grant Likely <> | Subject | Re: [PATCH V6 2/3] gpio: Add support for Intel ICHx/3100/Series[56] GPIO | Date | Mon, 12 Mar 2012 11:59:27 -0600 |
| |
On Wed, 07 Mar 2012 11:41:38 -0600 (CST), Aaron Sierra <asierra@xes-inc.com> wrote: > From: Peter Tyser <ptyser@xes-inc.com> > > This driver works on many Intel chipsets, including the ICH6, ICH7, > ICH8, ICH9, ICH10, 3100, Series 5/3400 (Ibex Peak), Series 6/C200 > (Cougar Point), and NM10 (Tiger Point). > > Additional Intel chipsets should be easily supported if needed, eg the > ICH1-5, EP80579, etc. > > Tested on QM67 (Cougar Point), QM57 (Ibex Peak), 3100 (Whitmore Lake), > and NM10 (Tiger Point). > > Includes work from Jean Delvare: > - Resource leak removal during module load/unload > - GPIO API bit value enforcement > > Also includes code cleanup from Guenter Roeck and Grant Likely. > > Signed-off-by: Peter Tyser <ptyser@xes-inc.com> > Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
It looks like this depends on the mfd patch for the header file, so this should be merged via the mfd tree.
g.
> --- > MAINTAINERS | 6 + > drivers/gpio/Kconfig | 13 ++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-ich.c | 419 +++++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 439 insertions(+), 0 deletions(-) > create mode 100644 drivers/gpio/gpio-ich.c >
| |