lkml.org 
[lkml]   [2012]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: I.MX35 PDK
Thanks for your response,

> 1. Back resistor 172 to the default value.
>
> 2. Removed the resistor 146, through which a voltage was applied from a PMIC
> (EXT_3V) on "CMOS_VIO".
>
> 3. Connecting a resistor 147 which supplies power from the LDO_3V3 on
> "CMOS_VIO".

> >The camera on the FSL BSP works fine with no hardware modification on
> >the mx35pdk.

> >As I suggested previously you should control the power rails, i2c pad
> >settings, etc from software so that the camera can also work in
> >mainline without the need of changing the hardware.

You're right, currently mainline Linux kernel i.MX35 PDK platform does not support power management
devices, probably for this reason was the need for small changes in equipment.

> On my display I see snow flickering and unfortunately not a live video from
> camera.

> >Do you have this patch applied?

Yes I need to prepare it.


> >http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=f910fb8fcd1c97788f2291c8646597bcd87ee061

> >Also, try to isolate the display from this issue. Capture the image to
> >a file and try to play it on a PC.

Thanks for the tip, I'll think about how I can check it.

Regards

Alex Gershgorin




\
 
 \ /
  Last update: 2012-03-12 17:09    [W:0.071 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site