lkml.org 
[lkml]   [2012]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] Video : Amba: Use in_interrupt() in clcdfb_sleep().
From
On Sun, Mar 11, 2012 at 8:06 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Sun, Mar 11, 2012 at 07:47:27PM +0530, santosh prasad nayak wrote:
>> Not to use in_atomic()  in driver code.
>>
>>  Following article  inspired me to do the change.
>> http://lwn.net/Articles/274695/
>>
>> "in_atomic() is for core kernel use only. Because in special
>> circumstances (ie: kmap_atomic()) we run inc_preempt_count() even on
>> non-preemptible kernels to tell the per-arch fault handler that it was
>> invoked by copy_*_user() inside kmap_atomic(), and it must fail.
>> In other words, in_atomic() works in a specific low-level situation,
>> but it was never meant to be used in a wider context. Its placement in
>> hardirq.h next to macros which can be used elsewhere was, thus, almost
>> certainly a mistake. As Alan Stern pointed out, the fact that Linux
>> Device Drivers recommends the use of in_atomic() will not have helped
>> the situation. Your editor recommends that the authors of that book be
>> immediately sacked. "
>>
>> In the present case, we just check whether its an IRQ context or user
>> context. So for that
>> we can use "in_interrupt()".
>>
>> Greg also mentions the same in the following mail.
>> http://www.spinics.net/lists/newbies/msg43402.html
>
> In which case, we'll just have to do mdelay() and forget about allowing
> anything else to run for the 20ms that we need to sleep.  Sucky but
> that's the way things are.

mdelay() or msleep() are there before. I did not change that.


my point is : in_atomic() vs "in_interrupt()".
We should avoid to use "in_atomic()" in driver code.

In the present case to check IRQ context "in_interrupt()" should be preferred.


regards
Santosh

regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-03-11 15:51    [W:0.068 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site