lkml.org 
[lkml]   [2012]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RE-SUBMIT 2/2] net/pch_gbe: supports eg20t ptp clock
I have a few issues, below.

Thanks,
Richard


On Thu, Mar 08, 2012 at 05:16:27PM +0900, Takahiro Shimizu wrote:
> From: Takahiroi Shimizu <tshimizu818@gmail.com>
>
> Supports EG20T ptp clock in the driver
>
> Changes e-mail address.
>
> Adds number.
>
> Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com>
> ---
> drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 13 ++
> drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 13 ++
> .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 217 +++++++++++++++++++-
> 3 files changed, 240 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> index 00bc4fc..bce0164 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
> @@ -20,3 +20,16 @@ config PCH_GBE
> purpose use.
> ML7223/ML7831 is companion chip for Intel Atom E6xx series.
> ML7223/ML7831 is completely compatible for Intel EG20T PCH.
> +
> +if PCH_GBE
> +
> +config PCH_PTP
> + bool "PCH PTP clock support"
> + default n
> + depends on PTP_1588_CLOCK_PCH
> + ---help---
> + Say Y here if you want to use Precision Time Protocol (PTP) in the
> + driver. PTP is a method to precisely synchronize distributed clocks
> + over Ethernet networks.
> +
> +endif # PCH_GBE
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> index a09a071..dd14915 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> @@ -630,6 +630,9 @@ struct pch_gbe_adapter {
> unsigned long tx_queue_len;
> bool have_msi;
> bool rx_stop_flag;
> + int hwts_tx_en;
> + int hwts_rx_en;
> + struct pci_dev *ptp_pdev;
> };
>
> extern const char pch_driver_version[];
> @@ -648,6 +651,16 @@ extern void pch_gbe_free_tx_resources(struct pch_gbe_adapter *adapter,
> extern void pch_gbe_free_rx_resources(struct pch_gbe_adapter *adapter,
> struct pch_gbe_rx_ring *rx_ring);
> extern void pch_gbe_update_stats(struct pch_gbe_adapter *adapter);
> +#ifdef CONFIG_PCH_PTP
> +extern u32 pch_ch_control_read(struct pci_dev *pdev);
> +extern void pch_ch_control_write(struct pci_dev *pdev, u32 val);
> +extern u32 pch_ch_event_read(struct pci_dev *pdev);
> +extern void pch_ch_event_write(struct pci_dev *pdev, u32 val);
> +extern u32 pch_src_uuid_lo_read(struct pci_dev *pdev);
> +extern u32 pch_src_uuid_hi_read(struct pci_dev *pdev);
> +extern u64 pch_rx_snap_read(struct pci_dev *pdev);
> +extern u64 pch_tx_snap_read(struct pci_dev *pdev);
> +#endif
>
> /* pch_gbe_param.c */
> extern void pch_gbe_check_options(struct pch_gbe_adapter *adapter);
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> index 3ead111..aa54ede 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> @@ -1,6 +1,6 @@
> /*
> * Copyright (C) 1999 - 2010 Intel Corporation.
> - * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
> + * Copyright (C) 2010 - 2012 LAPIS SEMICONDUCTOR CO., LTD.
> *
> * This code was derived from the Intel e1000e Linux driver.
> *
> @@ -21,6 +21,10 @@
> #include "pch_gbe.h"
> #include "pch_gbe_api.h"
> #include <linux/module.h>
> +#ifdef CONFIG_PCH_PTP
> +#include <linux/net_tstamp.h>
> +#include <linux/ptp_classify.h>
> +#endif
>
> #define DRV_VERSION "1.00"
> const char pch_driver_version[] = DRV_VERSION;
> @@ -95,12 +99,195 @@ const char pch_driver_version[] = DRV_VERSION;
>
> #define PCH_GBE_INT_DISABLE_ALL 0
>
> +#ifdef CONFIG_PCH_PTP
> +/* Macros for ieee1588 */
> +#define TICKS_NS_SHIFT 5

Remove this macro and keep it internal to ptp_pch.c.

> +
> +/* 0x40 Time Synchronization Channel Control Register Bits */
> +#define MASTER_MODE (1<<0)
> +#define SLAVE_MODE (0<<0)
> +#define V2_MODE (1<<31)
> +#define CAP_MODE0 (0<<16)
> +#define CAP_MODE2 (1<<17)
> +
> +/* 0x44 Time Synchronization Channel Event Register Bits */
> +#define TX_SNAPSHOT_LOCKED (1<<0)
> +#define RX_SNAPSHOT_LOCKED (1<<1)
> +#endif
> +
> static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
>
> static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
> static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
> int data);
>
> +#ifdef CONFIG_PCH_PTP
> +static struct sock_filter ptp_filter[] = {
> + PTP_FILTER
> +};
> +
> +static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
> +{
> + u8 *data = skb->data;
> + unsigned int offset;
> + u16 *hi, *id;
> + u32 lo;
> +
> + if ((sk_run_filter(skb, ptp_filter) != PTP_CLASS_V2_IPV4) &&
> + (sk_run_filter(skb, ptp_filter) != PTP_CLASS_V1_IPV4)) {

No, just run the filter once and test the result twice.

Also, doesn't the timestamping unit work with IPv6 and L2? If so,
don't restrict the driver to IPv4.

> + return 0;
> + }
> +
> + offset = ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
> +
> + if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid))
> + return 0;
> +
> + hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID);
> + id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
> +
> + memcpy(&lo, &hi[1], sizeof(lo));
> +
> + return (uid_hi == *hi &&
> + uid_lo == lo &&
> + seqid == *id);
> +}
> +
> +static void pch_rx_timestamp(
> + struct pch_gbe_adapter *adapter, struct sk_buff *skb)

Ugly line break. If you are worrried about the 80 character limit,
then how about something like this instead?

static void pch_rx_timestamp(struct pch_gbe_adapter *pga, struct sk_buff *skb)

> +{
> + struct skb_shared_hwtstamps *shhwtstamps;
> + struct pci_dev *pdev;
> + u64 ns;
> + u32 hi, lo, val;
> + u16 uid, seq;
> +
> + if (!adapter->hwts_rx_en)
> + return;
> +
> + /* Get ieee1588's dev information */
> + pdev = adapter->ptp_pdev;
> +
> + val = pch_ch_event_read(pdev);
> +
> + if (!(val & RX_SNAPSHOT_LOCKED))
> + return;
> +
> + lo = pch_src_uuid_lo_read(pdev);
> + hi = pch_src_uuid_hi_read(pdev);
> +
> + uid = hi & 0xffff;
> + seq = (hi >> 16) & 0xffff;
> +
> + if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq)))
> + goto out;
> +
> + ns = pch_rx_snap_read(pdev);
> + ns <<= TICKS_NS_SHIFT;

Do this shift in pch_rx_snap_read() instead.

> +
> + shhwtstamps = skb_hwtstamps(skb);
> + memset(shhwtstamps, 0, sizeof(*shhwtstamps));
> + shhwtstamps->hwtstamp = ns_to_ktime(ns);
> +out:
> + pch_ch_event_write(pdev, RX_SNAPSHOT_LOCKED);
> +}
> +
> +static void pch_tx_timestamp(
> + struct pch_gbe_adapter *adapter, struct sk_buff *skb)

Another ugly line break.

> +{
> + struct skb_shared_hwtstamps shhwtstamps;
> + struct pci_dev *pdev;
> + struct skb_shared_info *shtx;
> + u64 ns;
> + u32 cnt, val;
> +
> + shtx = skb_shinfo(skb);
> + if (unlikely(shtx->tx_flags & SKBTX_HW_TSTAMP && adapter->hwts_tx_en))
> + shtx->tx_flags |= SKBTX_IN_PROGRESS;
> + else
> + return;
> +
> + /* Get ieee1588's dev information */
> + pdev = adapter->ptp_pdev;
> +
> + /*
> + * This really stinks, but we have to poll for the Tx time stamp.
> + * Usually, the time stamp is ready after 4 to 6 microseconds.
> + */
> + for (cnt = 0; cnt < 100; cnt++) {
> + val = pch_ch_event_read(pdev);
> + if (val & TX_SNAPSHOT_LOCKED)
> + break;
> + udelay(1);
> + }
> + if (!(val & TX_SNAPSHOT_LOCKED)) {
> + shtx->tx_flags &= ~SKBTX_IN_PROGRESS;
> + return;
> + }
> +
> + ns = pch_tx_snap_read(pdev);
> + ns <<= TICKS_NS_SHIFT;

Do the shift in pch_tx_snap_read().

> +
> + memset(&shhwtstamps, 0, sizeof(shhwtstamps));
> + shhwtstamps.hwtstamp = ns_to_ktime(ns);
> + skb_tstamp_tx(skb, &shhwtstamps);
> +
> + pch_ch_event_write(pdev, TX_SNAPSHOT_LOCKED);
> +}
> +
> +static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
> +{
> + struct hwtstamp_config cfg;
> + struct pch_gbe_adapter *adapter = netdev_priv(netdev);
> + struct pci_dev *pdev;
> +
> + if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
> + return -EFAULT;
> +
> + if (cfg.flags) /* reserved for future extensions */
> + return -EINVAL;
> +
> + /* Get ieee1588's dev information */
> + pdev = adapter->ptp_pdev;
> +
> + switch (cfg.tx_type) {
> + case HWTSTAMP_TX_OFF:
> + adapter->hwts_tx_en = 0;
> + break;
> + case HWTSTAMP_TX_ON:
> + adapter->hwts_tx_en = 1;
> + break;
> + default:
> + return -ERANGE;
> + }
> +
> + switch (cfg.rx_filter) {
> + case HWTSTAMP_FILTER_NONE:
> + adapter->hwts_rx_en = 0;
> + break;
> + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
> + adapter->hwts_rx_en = 0;
> + pch_ch_control_write(pdev, (SLAVE_MODE | CAP_MODE0));
> + break;
> + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
> + adapter->hwts_rx_en = 1;
> + pch_ch_control_write(pdev, (MASTER_MODE | CAP_MODE0));
> + break;
> + case HWTSTAMP_FILTER_PTP_V2_EVENT:
> + adapter->hwts_rx_en = 1;
> + pch_ch_control_write(pdev, (V2_MODE | CAP_MODE2));
> + break;
> + default:
> + return -ERANGE;
> + }
> +
> + /* Clear out any old time stamps. */
> + pch_ch_event_write(pdev, TX_SNAPSHOT_LOCKED | RX_SNAPSHOT_LOCKED);
> +
> + return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
> +}
> +#endif
> +
> inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
> {
> iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD);
> @@ -1072,6 +1259,11 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
> iowrite32(tx_ring->dma +
> (int)sizeof(struct pch_gbe_tx_desc) * ring_num,
> &hw->reg->TX_DSC_SW_P);
> +
> +#ifdef CONFIG_PCH_PTP
> + pch_tx_timestamp(adapter, skb);
> +#endif
> +
> dev_kfree_skb_any(skb);
> }
>
> @@ -1543,6 +1735,11 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
> adapter->stats.multicast++;
> /* Write meta date of skb */
> skb_put(skb, length);
> +
> +#ifdef CONFIG_PCH_PTP
> + pch_rx_timestamp(adapter, skb);
> +#endif
> +
> skb->protocol = eth_type_trans(skb, netdev);
> if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
> skb->ip_summed = CHECKSUM_NONE;
> @@ -2147,6 +2344,11 @@ static int pch_gbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
>
> pr_debug("cmd : 0x%04x\n", cmd);
>
> +#ifdef CONFIG_PCH_PTP
> + if (cmd == SIOCSHWTSTAMP)
> + return hwtstamp_ioctl(netdev, ifr, cmd);
> +#endif
> +
> return generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
> }
>
> @@ -2440,6 +2642,15 @@ static int pch_gbe_probe(struct pci_dev *pdev,
> goto err_free_netdev;
> }
>
> +#ifdef CONFIG_PCH_PTP
> + adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number,
> + PCI_DEVFN(12, 4));
> + if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
> + pr_err("Bad ptp filter\n");
> + return -EINVAL;
> + }
> +#endif
> +
> netdev->netdev_ops = &pch_gbe_netdev_ops;
> netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD;
> netif_napi_add(netdev, &adapter->napi,
> @@ -2504,7 +2715,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
> netif_carrier_off(netdev);
> netif_stop_queue(netdev);
>
> - dev_dbg(&pdev->dev, "OKIsemi(R) PCH Network Connection\n");
> + dev_dbg(&pdev->dev, "PCH Network Connection\n");
>
> device_set_wakeup_enable(&pdev->dev, 1);
> return 0;
> @@ -2605,7 +2816,7 @@ module_init(pch_gbe_init_module);
> module_exit(pch_gbe_exit_module);
>
> MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
> -MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
> +MODULE_AUTHOR("LAPIS SEMICONDUCTOR, <tshimizu818@gmail.com>");
> MODULE_LICENSE("GPL");
> MODULE_VERSION(DRV_VERSION);
> MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
> --
> 1.7.4.4
>


\
 
 \ /
  Last update: 2012-03-10 12:15    [W:0.091 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site