lkml.org 
[lkml]   [2012]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] gpio: pl061: enable interrupts with DT style binding

On 02/09/2012 02:04 PM, Shawn Guo wrote:
> On Fri, Feb 03, 2012 at 04:35:12PM -0600, Rob Herring wrote:
> ...
>> @@ -126,18 +127,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
>> static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
>> {
>> struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
>> -
>> - if (chip->irq_base <= 0)
>> - return -EINVAL;
>> -
>> - return chip->irq_base + offset;
>> + if (!chip->irq_gc)
>> + return -ENXIO;
>> + return irq_find_mapping(chip->irq_gc->domain, offset);
>
> If I understand the driver correctly, it will add a linear domain for
> dt case. Do you have code somewhere creating the mapping before this
> irq_find_mapping gets called here? The reason I'm asking this is I
> have to call irq_create_mapping rather than irq_find_mapping here to
> get imx gpio driver working with linear domain, otherwise the
> irq_find_mapping call will fail.
>

Right, the user has to call irq_of_parse_and_map (which calls
irq_create_mapping ultimately). Interrupts are allocated on demand. The
dts needs to declare the gpio controller as an interrupt-controller and
the node using the gpio line needs to set its interrupt parent and
interrupt connection

Rob

> Regards,
> Shawn
>
>> }


\
 
 \ /
  Last update: 2012-02-09 23:05    [W:0.116 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site