lkml.org 
[lkml]   [2012]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: mmc sdhci mmcblk0: error -110 sending status command, retrying


Jeff,

I think the sdhci.c clock setting code was changed a while ago. Maybe revert that mod and see what happens.

The card is a 24MHz which is rather slow so I would be surprised if that was it.
The other option is the force enable the High Speed bit in the controller (used when speed is 25MHz or faster). Will give the system more time (in theory) to work.

Philip

On Feb 7, 2012, at 5:09 PM, Jeff Chua wrote:

> On Wed, Feb 8, 2012 at 7:45 AM, Jaehoon Chung <jh80.chung@samsung.com> wrote:
>> On 02/08/2012 03:33 AM, Jeff Chua wrote:
>
> I tried a Class6 8GB and after a few inserts, it could read without
> errors. The Class10 seems to be more sensitive to speed.
>
> Jeff



\
 
 \ /
  Last update: 2012-02-08 20:11    [W:0.068 / U:1.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site