lkml.org 
[lkml]   [2012]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: An extremely simplified pinctrl bindings proposal
On 2/6/2012 7:33 PM, Stephen Warren wrote:
> On 02/06/2012 11:05 AM, Mitch Bradley wrote:
>> I like the general approach of simplifying the pinctrl thing, as the
>> previous approach did not appear to be converging.
>>
>> One possible name would be "gpconfig" - for general purpose configuration.
>
> Sounds reasonable
>
>> The register access model in the strawman proposal is probably too
>> simple. 32-bit memory mapped registers are certainly the most common
>> subcase on ARM, but there are many other cases that occur in practice:
>>
>> * Registers that must be accessed with 8, 16, or 64-bit cycles.
>> * Registers that have side effects on read, so read-mask-write must be
>> avoided
>> * Registers accessed via an index/data cycle pair, thus having locking
>> requirements
>> * Registers that must be read after being written, or otherwise
>> requiring some sort of memory-ordering enforcement.
>> * Time delays between pairs of writes
>> * PCI configuration registers, which often have some combination of the
>> above
>> * Registers behind serial buses like I2C
>>
>> Both Open Firmware and ACPI have addressed this general problem. In
>> addition to a numeric identifier for the register, you need to specify
>> the access semantics. It's difficult to finitely enumerate all possible
>> cases, but you can get to 99.9% with a modest number of access models,
>> and then add new models as needed.
>
> My thinking was that each driver that permitted execution of these
> register write sequences on its registers would provide an extremely
> simple driver to support this. Perhaps just one "op" function that
> implemented each write, and took care of details such as timing delays
> for the IO, indexed addressing, using I2C instead of memory-mapped,
> perhaps register access width, etc.
>
> Some of the items in the list above could be solved by explicit flags in
> the data instead (register access width comes to mind for memory-mapped
> devices at least).
>
> Do you have any direct pointers to how OF and ACPI solved this kind of
> thing; it'd be good background.

In ACPI, you declare an "OperationRegion" with a given "region space"
(an enumeration from SystemMemory, SystemIO, PCIConfig, SMBus,
EmbeddedControl, CMOS, PCIBARTarget) - ACPI spec section 17.5.89.
Inside that operation region, you declare various fields, further
specifying the subordinate access type from a region-dependent list.
Those access types include ByteAcc, WordAcc, DWordAcc, QWordAcc, and
BufferAcc. The field declaration further specifies whether or not a
mutex must be acquired, and a rule for what to do about unmodified bits
within the larger object containing the field. ACPI Spec 17.5.44

In OFW, each parent bus has a set of methods for performing
memory-mapped I/O operations on its addressable regions. The child
devices invoke a "map-in" method in the parent to acquire an address
token, then pass that token to access methods in the parent node. For
the common case, there are a set of fetch and store methods for the
usual sizes (8, 16, 32), and for more complex cases, the parent can define
whatever methods make sense for its needs. The methods are implemented
by byte code associated with the parent driver.





\
 
 \ /
  Last update: 2012-02-07 08:09    [W:0.094 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site