lkml.org 
[lkml]   [2012]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH RT 2/2 v4] preempt-rt/x86: Delay calling signals in int3
From
Date
On Sun, 2012-02-05 at 20:23 +0100, Oleg Nesterov wrote:
> On 02/03, Steven Rostedt wrote:
> >
> > If
> > we can solve this in a clean way using the existing signal
> > infrastructure, I'm all for that.
>
> I am not sure, I know almost nothing about rt and about this
> low-level stuff. But please look at my attempt below.
>
> So. it is very simple. The patch simply changes force_sig_info() to
> check in_atomic(), if it is true we offload the sending to
> do_notify_resume(). Of course, I do not know if we can rely on this
> check in rt kernels.
>
> Note:
>
> - The patch adds the new code under CONFIG_PREEMPT_RT_FULL,
> it should probably check X86_64 or defined(TIF_NOTIFY_RESUME)
> as well.
>
> - I think we can later move task->forced_info into restart_block's
> union.
>
> - We could modify get_signal_to_deliver() instead of the
> arch-dependant do_notify_resume(). In this case we do not
> need TIF_NOTIFY_RESUME, TIF_SIGPENDING is enough.
>
> What do you think?
>
> Oleg.
> ---
>
> arch/x86/kernel/signal.c | 9 +++++++++
> include/linux/sched.h | 4 ++++
> kernel/signal.c | 31 +++++++++++++++++++++++++++++--

The problem I have with this patch is here. The change to
kernel/signal.c. If anything, all the changes should be encompassed with
a #ifdef CONFIG_X86_64 as well (or defined(CONFIG_PREEMPT_RT_FULL) &&
defined(CONFIG_X86_64)).

Below is an update of my patch that also handles the stack_segment
fault. I used the info.si_signo to pass what sig is to be sent, and
changed the flag from TIF_FORCE_SIG_TRAP to just TIF_FORCE_SIG. Is this
still acceptable.

I'm not attached to this patch over Oleg's. I've tested both, and they
both work. Oleg's is simpler but puts some of the changes into the core
kernel/signal.c file. Mine is a little more complex but keeps the code
more contained in the x86 arch. If adding x86 specific code into the
core signal code is acceptable, I'll take Oleg's patch.

I'd like to hear from others. Which is more appropriate if we ever need
to send this mainline?

Again, I'd take Oleg's patch just as much as I'd take my own. I really
don't care.

Oleg, if I do end up taking your patch, I still need your signed-off-by.

Thanks!

-- Steve

preempt-rt/x86: Delay calling signals in int3

On x86_64 we must disable preemption before we enable interrupts
for int3 and debugging, because the current task is using a per CPU
debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.

When CONFIG_PREEMPT_RT_FULL is enabled, spin_locks become mutexes, and
one of these is the spin lock used in signal handling.

Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spin lock that has been converted to a mutex
and has the possibility to sleep. If this happens, the above issues with
the corrupted stack is possible.

Instead of calling the signal right away, for PREEMPT_RT and x86_64,
the signal information is stored on the stacks task_struct and a
new TIF flag is set (TIF_FORCE_SIG_TRAP). On exit of the exception,
in paranoid_exit, if NEED_RESCHED is set, the task stack is switched
back to the kernel stack and interrupts is enabled. In this code
the TIF_FORCE_SIG_TRAP is also checked and a function is called to
do the force_sig() in a context that may schedule.

Note, to get into this path, the NEED_RESCHED flag is also set.
But as this only happens in debug context, an extra schedule should not
be an issue.

Cc: stable-rt@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Index: linux-rt.git/arch/x86/include/asm/thread_info.h
===================================================================
--- linux-rt.git.orig/arch/x86/include/asm/thread_info.h
+++ linux-rt.git/arch/x86/include/asm/thread_info.h
@@ -95,6 +95,7 @@ struct thread_info {
#define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */
#define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */
#define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */
+#define TIF_FORCE_SIG 29 /* force a signal coming back from trap */

#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
@@ -117,6 +118,7 @@ struct thread_info {
#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
#define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_FORCE_SIG (1 << TIF_FORCE_SIG)

/* work to do in syscall_trace_enter() */
#define _TIF_WORK_SYSCALL_ENTRY \
@@ -266,5 +268,14 @@ extern void arch_task_cache_init(void);
extern void free_thread_info(struct thread_info *ti);
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
#define arch_task_cache_init arch_task_cache_init
+
+struct siginfo;
+/*
+ * Hacks for RT to get around signal processing with int3 and do_debug.
+ */
+void
+force_sig_info_rt(int sig, struct siginfo *info, struct task_struct *p, int rt);
+void send_sigtrap_rt(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code, int si_code);
#endif
#endif /* _ASM_X86_THREAD_INFO_H */
Index: linux-rt.git/arch/x86/kernel/entry_64.S
===================================================================
--- linux-rt.git.orig/arch/x86/kernel/entry_64.S
+++ linux-rt.git/arch/x86/kernel/entry_64.S
@@ -1391,6 +1391,14 @@ paranoid_userspace:
paranoid_schedule:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_ANY)
+#ifdef CONFIG_PREEMPT_RT_FULL
+ GET_THREAD_INFO(%rcx)
+ movl TI_flags(%rcx),%ebx
+ testl $_TIF_FORCE_SIG,%ebx
+ jz paranoid_do_schedule
+ call do_force_sig_trap
+paranoid_do_schedule:
+#endif
call schedule
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
Index: linux-rt.git/arch/x86/kernel/ptrace.c
===================================================================
--- linux-rt.git.orig/arch/x86/kernel/ptrace.c
+++ linux-rt.git/arch/x86/kernel/ptrace.c
@@ -1341,14 +1341,31 @@ void user_single_step_siginfo(struct tas
fill_sigtrap_info(tsk, regs, 0, TRAP_BRKPT, info);
}

-void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
- int error_code, int si_code)
+static void __send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code, int si_code, int rt)
{
struct siginfo info;

fill_sigtrap_info(tsk, regs, error_code, si_code, &info);
/* Send us the fake SIGTRAP */
- force_sig_info(SIGTRAP, &info, tsk);
+ force_sig_info_rt(SIGTRAP, &info, tsk, rt);
+}
+
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code, int si_code)
+{
+ __send_sigtrap(tsk, regs, error_code, si_code, 0);
+}
+
+void send_sigtrap_rt(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code, int si_code)
+{
+#if defined(CONFIG_X86_64) && defined(CONFIG_PREEMPT_RT_FULL)
+ int rt = 1;
+#else
+ int rt = 0;
+#endif
+ __send_sigtrap(tsk, regs, error_code, si_code, rt);
}


Index: linux-rt.git/arch/x86/kernel/traps.c
===================================================================
--- linux-rt.git.orig/arch/x86/kernel/traps.c
+++ linux-rt.git/arch/x86/kernel/traps.c
@@ -121,9 +121,84 @@ static inline void conditional_cli_ist(s
#endif
}

+#if defined(CONFIG_X86_64) && defined(CONFIG_PREEMPT_RT_FULL)
+/*
+ * In PREEMP_RT_FULL, the signal spinlocks are mutexes. But if
+ * do_int3 calls do_trap, we are running on the debug stack, and
+ * not the task struct stack. We must keep preemption disabled
+ * because the current stack is per CPU not per task.
+ *
+ * Instead, we set the
+
+ */
+void
+__force_sig_info_rt(int sig, struct siginfo *info, struct task_struct *p, int rt)
+{
+ if (!rt) {
+ /* simple case */
+ if (info)
+ force_sig_info(sig, info, p);
+ else
+ force_sig(sig, p);
+ return;
+ }
+ trace_printk("doing delayed force_sig info=%p\n", info);
+ /*
+ * Sad, but to make things easier we set need resched,
+ * this forces the paranoid exit in traps to swap out
+ * of the debug stack and back to the users stack.
+ * Then there we call do_force_sig_trap() which does
+ * the delayed force_sig() with interrupts enabled and
+ * a thread stack that we can schedule on.
+ */
+ set_need_resched();
+ set_thread_flag(TIF_FORCE_SIG);
+ if (info) {
+ memcpy(&p->stored_info, info, sizeof(p->stored_info));
+ p->stored_info_set = 1;
+ } else {
+ p->stored_info.si_signo = sig;
+ p->stored_info_set = 0;
+ }
+}
+
+void force_sig_rt(int sig, struct task_struct *p, int rt)
+{
+ __force_sig_info_rt(sig, NULL, p, rt);
+}
+
+void
+force_sig_info_rt(int sig, struct siginfo *info, struct task_struct *p, int rt)
+{
+ __force_sig_info_rt(sig, info, p, rt);
+}
+
+void do_force_sig_trap(void)
+{
+ struct task_struct *p = current;
+
+ trace_printk("forced sig! (set=%d)\n", p->stored_info_set);
+ if (p->stored_info_set)
+ force_sig_info(p->stored_info.si_signo, &p->stored_info, p);
+ else
+ force_sig(p->stored_info.si_signo, p);
+ p->stored_info_set = 0;
+ clear_thread_flag(TIF_FORCE_SIG);
+}
+#else
+void force_sig_rt(int sig, struct task_struct *p, int rt)
+{
+ force_sig(sig, p);
+}
+void force_sig_info_rt(int sig, struct siginfo *info, struct task_struct *p, int rt)
+{
+ force_sig_info(sig, info, p);
+}
+#endif
+
static void __kprobes
-do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
- long error_code, siginfo_t *info)
+__do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+ long error_code, siginfo_t *info, int rt)
{
struct task_struct *tsk = current;

@@ -172,7 +247,7 @@ trap_signal:
if (info)
force_sig_info(signr, info, tsk);
else
- force_sig(signr, tsk);
+ force_sig_rt(signr, tsk, rt);
return;

kernel_trap:
@@ -192,6 +267,20 @@ vm86_trap:
#endif
}

+static void __kprobes
+do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+ long error_code, siginfo_t *info)
+{
+ __do_trap(trapnr, signr, str, regs, error_code, info, 0);
+}
+
+static void __kprobes
+do_trap_rt(int trapnr, int signr, char *str, struct pt_regs *regs,
+ long error_code, siginfo_t *info)
+{
+ __do_trap(trapnr, signr, str, regs, error_code, info, 1);
+}
+
#define DO_ERROR(trapnr, signr, str, name) \
dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
{ \
@@ -237,7 +326,7 @@ dotraplinkage void do_stack_segment(stru
12, SIGBUS) == NOTIFY_STOP)
return;
conditional_sti_ist(regs);
- do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
+ do_trap_rt(12, SIGBUS, "stack segment", regs, error_code, NULL);
conditional_cli_ist(regs);
}

@@ -331,7 +420,7 @@ dotraplinkage void __kprobes do_int3(str
#endif

conditional_sti_ist(regs);
- do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
+ do_trap_rt(3, SIGTRAP, "int3", regs, error_code, NULL);
conditional_cli_ist(regs);
}

@@ -449,7 +538,7 @@ dotraplinkage void __kprobes do_debug(st
}
si_code = get_si_code(tsk->thread.debugreg6);
if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
- send_sigtrap(tsk, regs, error_code, si_code);
+ send_sigtrap_rt(tsk, regs, error_code, si_code);
conditional_cli_ist(regs);

return;
Index: linux-rt.git/include/linux/sched.h
===================================================================
--- linux-rt.git.orig/include/linux/sched.h
+++ linux-rt.git/include/linux/sched.h
@@ -1600,10 +1600,16 @@ struct task_struct {
struct rcu_head put_rcu;
int softirq_nestcnt;
#endif
-#if defined CONFIG_PREEMPT_RT_FULL && defined CONFIG_HIGHMEM
+#if defined CONFIG_PREEMPT_RT_FULL
+#ifdef CONFIG_X86_64
+ struct siginfo stored_info;
+ int stored_info_set;
+#endif
+#ifdef CONFIG_HIGHMEM
int kmap_idx;
pte_t kmap_pte[KM_TYPE_NR];
#endif
+#endif /* CONFIG_PREEMPT_RT_FULL */
};

#ifdef CONFIG_PREEMPT_RT_FULL



\
 
 \ /
  Last update: 2012-02-07 15:19    [W:0.089 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site