lkml.org 
[lkml]   [2012]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] PM / QoS: add pm_qos_update_request_timeout API
Date
The new API, pm_qos_update_request_timeout() is to provide a timeout
with pm_qos_update_request.

For example, pm_qos_update_request_timeout(req, 100, 1000), means that
QoS request on req with value 100 will be active for 1000 jiffies.
After 1000 jiffies, the QoS request thru req is rolled back to the
request status when pm_qos_update_request_timeout() was called. If there
were another pm_qos_update_request(req, x) during the 1000 jiffies, this
new request with value x will override as this is another request on the
same req handle. A new request on the same req handle will always
override the previous request whether it is the conventional request or
it is the new timeout request.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

---
Chages from v1(RFC)
- The semmantics of timeout changed. A timeout now means that the
corresponding qos-req object is being cancelled, not rolling back to
the qos request state at the time of API call. With this changes,
combined with the conventional update_request API, there exists up to
only one qos request per qos-req object.
- The timeout values is expressed in ms (1/1000 sec), not jiffies.
- Style changes, removing unnecessary changes.
- Bugfixes regarding pending timeout work.
---
include/linux/pm_qos.h | 4 +++
kernel/power/qos.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+), 0 deletions(-)

diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index f8ccb7b..0c13a74 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -8,6 +8,7 @@
#include <linux/notifier.h>
#include <linux/miscdevice.h>
#include <linux/device.h>
+#include <linux/workqueue.h>

#define PM_QOS_RESERVED 0
#define PM_QOS_CPU_DMA_LATENCY 1
@@ -29,6 +30,7 @@
struct pm_qos_request {
struct plist_node node;
int pm_qos_class;
+ struct delayed_work work; /* for pm_qos_update_request_timeout */
};

struct dev_pm_qos_request {
@@ -74,6 +76,8 @@ void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
s32 value);
void pm_qos_update_request(struct pm_qos_request *req,
s32 new_value);
+void pm_qos_update_request_timeout(struct pm_qos_request *req,
+ s32 new_value, unsigned long timeout_ms);
void pm_qos_remove_request(struct pm_qos_request *req);

int pm_qos_request(int pm_qos_class);
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index c149af3..c07a91f 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -259,6 +259,21 @@ int pm_qos_request_active(struct pm_qos_request *req)
EXPORT_SYMBOL_GPL(pm_qos_request_active);

/**
+ * pm_qos_work_fn - the timeout handler of pm_qos_update_request_timeout
+ * @work: work struct for the delayed work (timeout)
+ *
+ * This cancels the timeout request by falling back to the default at timeout.
+ */
+static void pm_qos_work_fn(struct work_struct *work)
+{
+ struct pm_qos_request *req = container_of(to_delayed_work(work),
+ struct pm_qos_request,
+ work);
+
+ pm_qos_update_request(req, PM_QOS_DEFAULT_VALUE);
+}
+
+/**
* pm_qos_add_request - inserts new qos request into the list
* @req: pointer to a preallocated handle
* @pm_qos_class: identifies which list of qos request to use
@@ -282,6 +297,7 @@ void pm_qos_add_request(struct pm_qos_request *req,
return;
}
req->pm_qos_class = pm_qos_class;
+ INIT_DELAYED_WORK(&req->work, pm_qos_work_fn);
pm_qos_update_target(pm_qos_array[pm_qos_class]->constraints,
&req->node, PM_QOS_ADD_REQ, value);
}
@@ -308,6 +324,9 @@ void pm_qos_update_request(struct pm_qos_request *req,
return;
}

+ if (delayed_work_pending(&req->work))
+ cancel_delayed_work_sync(&req->work);
+
if (new_value != req->node.prio)
pm_qos_update_target(
pm_qos_array[req->pm_qos_class]->constraints,
@@ -316,6 +335,34 @@ void pm_qos_update_request(struct pm_qos_request *req,
EXPORT_SYMBOL_GPL(pm_qos_update_request);

/**
+ * pm_qos_update_request_timeout - modifies an existing qos request temporarily.
+ * @req : handle to list element holding a pm_qos request to use
+ * @new_value: defines the temporal qos request
+ * @timeout_ms: the effective duration of this qos request in msecs.
+ *
+ * After timeout_ms, this qos request is cancelled automatically.
+ */
+void pm_qos_update_request_timeout(struct pm_qos_request *req, s32 new_value,
+ unsigned long timeout_ms)
+{
+ if (!req)
+ return;
+ if (WARN(!pm_qos_request_active(req),
+ "%s called for unknown object.", __func__))
+ return;
+
+ if (delayed_work_pending(&req->work))
+ cancel_delayed_work_sync(&req->work);
+
+ if (new_value != req->node.prio)
+ pm_qos_update_target(
+ pm_qos_array[req->pm_qos_class]->constraints,
+ &req->node, PM_QOS_UPDATE_REQ, new_value);
+
+ schedule_delayed_work(&req->work, msecs_to_jiffies(timeout_ms));
+}
+
+/**
* pm_qos_remove_request - modifies an existing qos request
* @req: handle to request list element
*
@@ -334,6 +381,9 @@ void pm_qos_remove_request(struct pm_qos_request *req)
return;
}

+ if (delayed_work_pending(&req->work))
+ cancel_delayed_work_sync(&req->work);
+
pm_qos_update_target(pm_qos_array[req->pm_qos_class]->constraints,
&req->node, PM_QOS_REMOVE_REQ,
PM_QOS_DEFAULT_VALUE);
--
1.7.4.1


\
 
 \ /
  Last update: 2012-02-29 05:59    [W:0.115 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site